STM32F4-Discovery and 2 HC-SR04 ultrasonic sensors

This video shows how to use STM32 microcontroller to read info from HC-SR04 ultrasonic sensor.
HC-SR04 datasheet: www.electroschematics.com/wp-...
Video by Elvar Liiv
TalTech IoT Center
iot.ttu.ee

[@boratsagdiyev3936]

COOL! I used the timer input capture in DMA mode to make it more efficient, but very good stuff.

[@erykmroczko8427]

Can you share your code?

[@pragyachoudhary9163]

good work sir

[@firasoiderni8676]

Goodmoring ,
i wanna ask a question , how you interface Hterm with keil ? , and thanks advance :)

[@halilaaydemir]

I could not set up the link. Do you have a chance to show the link?

[@GhionAshenafi]

Couldn't find z video u mentioned is present: calculating prescaler and other values

[@saikrishnakaruturi2958]

at what pins in the microcontroller do we have to connect the trigger pins of the both sensors

[@enriquehernandez8197]

HI, sorry, why preescaler is to 79 and ARR is 65535 in TIMER8, what is the measure that do you want?

[@takwasmidi3284]

did u find the answer ? :)

[@sw1746]

Hi, are stm32 pins tolerant to 5V from hc-sr04 echo output? Did you use level shifter?

[@wyznacznik5363]

you need just 2 resistors, i used 9.7 Ohm and 4.6 Ohm so i get 3.4 V

[@tv-eu4xu]

굿

[@raguelignacio3808]

I have a question: Why should we start TIM11 base clock twice?

[@emirozer2855]

I think other one should be TIM8.

[@saraazizi2198]

How you connect between stm32 microcontroller and ultrasonic sensor?

[@muhajideenroom]

Look at google:)

[@hakaniri2123]

gadasını aldıgımın gurban olam sana.

[@baole8008]

how to connect between STM32 microcontroller and HC-SR04 ultrasonic sensor.?

[@thanghieu2333]

t cũng đang làm cái này và k biết nối làm sao

[@wyznacznik5363]

@@thanghieu2333 dzięki działa

[@hakaniri2123]

do you have a personal contact?

[@narwresbarhoumi2292]

Pourquoi avez-vous utilisé le protocole UART puisque le capteur à ultrasons HC-SR04 n'a pas de broches RX et TX ?

[@vladmaftei4858]

On a utilise le protocole UART pour recevoir les information echox, distancex dans le terminal Hterm program qui est ouvert sur le display (gauche).

[@narwresbarhoumi2292]

@@vladmaftei4858 merci j'ai compris , j'ai une autre question c'est vrai que vous avez fait la configuration du protocole ,mais vous n'avez pas utiliser HAL_UART_Transmit() dans le while ,je sais que vous avez mis ça dans la fonction putchar_prototype mais vous n'avez pas utiliser cette fonction dans while ?

[@salihay]

hi, could you share the codes?

[@muzafferdindar820]

usta buldun mu kodları

[@salihay]

@@muzafferdindar820 yok malesef

[@muzafferdindar820]

Ya bizim ödev proje var çok az zamanı kaldı takıldığımız yerler var napacagiz bilmiyoruz

[@teelee1221]

This guy copied from somewhere that makes him did not do well in the video. He also could not answer people questions. Shame!