I just picked up a 212 greyhound for 75 bucks brand new. They don’t sell them anymore and are built better than the new predators that they sell. I like them though
My thoughts exactly I've cleaned carburetor a lot worse shape than that I'm sure. Parts cleaner would be the best but you can still do it by hand that's why they make carburetor cleaner. I have had a few carburetors that were too far gone but you can get one from China for twenty thirty dollars.
This one is the coolest yet!! The rear axle was really bent before I don't think it got any worse after the "EPIC" jump!! I bet Isaac it'll be fine's whole life flashed before him!! lol!!Wuuuuu doggie!!!! Looks like it ever so lightly reached 30MPH. Would have gone faster if you would have let it!! Nice catch guys!! Keep on cart'n!!
you could see the axle bend when you first started it at the beginning of the clip and it looked to be bent in about the same spot. I think you overpaid by about $10 dollars because of the bent axle. Give it a V8- and it'll be fine
I enjoy looking at the past adventures as much as the current ones. Birth of the Murray. One of my favorite carts. Kids, I seen this very video when it was new and I was younger. I just might need a nap later.
I've watched several of your videos, but after watching the one where you ran over the bush, I had to subscribe. You guys remind me of myself, you must be Texas boys.
axle was bent at the start. mod it for more suspension travel. Use a bigger axle. Adjust front end so the steering isnt toe-ed in so far, you will have less bump steer. Also the single a-arm front is hurting steering performance.
I still can't believe I bumped into you guys at Krispy Kreme during mustang week in Myrtle Beach that was super sweet a true pleasure guys keep up the good work !
get another axle and put a third bushing i the middle , jump that thing it was made for it . It is just you are heavyer than a 12 yr old . And " it'll be fine"
+Isaac it'll be fine do you think I should open header my Tecumseh 6.0 horsepower on a similiar kart but it's getting blow by and is losing power by the foot that it moves
It's a Murray!!!!!!!) my first mower was a Murray, probably still running, mowing grass somewhere. Don't know about there new products, but there old stuff is tuff as nails !!!!
I watched the rear axle before you changed engines, the axle was bent as bad before you changed the engine.... also looks like the deck the engine sits on might need to be welded?
great go kart find and fun video! The axle was definitely already bent before the motor swap. Of course....those jumps didn't help either, lol !! Keep up the great work guys !
LMFAO seeing the cat bolt! And I love cats. Got his or her heart rate up. You just added 1 life to that cat with one simple (and awesome) 3 second rev. I am so glad you caught that on the vid. Anyway! On to the nuts and bolts of this feature.
Today I Got a go cart I found on the side of the road for free that had sat in a paddoc for 3 years to start with a bit of fuel and $5 worth of fuel lines. I'm excited to shred around the neighbourhood
Where did u guys find that for 200 dollars?! In my area people are trying to get rid of something like that for in between 600 and 1000 dollars not running and driving.
@@Someaussiewavz i was 15 years old when i made that comment. And it still stands. It's still fucking clickbait. "hey we bought this chassis for $200...here's an entire engine we put in, plus whatever it didn't have." its stupid
Is it just me or is the rear axle bent? I noticed it during the original engines test and when he was driving down the road and the go kart was bouncing
by this late date, there probably no questions remaining. anyway, at 5:39, some bend in the axle is seen. it seems like the sprocket impacted the ground, such that the existing bend was increased. cheers
Ya the axle was bent already, noticed that when you were swapping engines. Fenders be good too, you will tire of getting constantly splashed. I foresee a bunch of messy trails in your property lol.
The things got compression and it's got spark and runs on ether all I need is that float needle to slide up and down so I can get gas in the bowl and the bolt holding the ball is actually the jet clean that out at the run like a champ
Predator 212, the official motor of "Let's put a new motor on it"
I mean there pretty good engines I run it on my manco Intruder II
The replacement of almost every Briggs and Stratton or just old 212 predator
Sounds about right
I just picked up a 212 greyhound for 75 bucks brand new. They don’t sell them anymore and are built better than the new predators that they sell. I like them though
Or just grab a gas pressure washer and put that engine on it
the rear shaft was bent from when you guys first started it up with the original engine
yup
Yup it was bent when you got it
Agreed Ike didnt make it any worse
What do you guys think? Is it our best find yet?
best i like it is it for sale????XD
Sexy
Did you guys find it on Craigslist
heyump
motorcycle engine swap..?
Need a series where you each get the same ammount of cash to build a cart, then do a best of 3 5 lap race around the property
Dude that sounds exactly like chump car racing
I think that is an awesome idea!!
That’s sounds sick
That would be fun.
Each contestant gets $1,500 and can source the parts from wherever they can buy them from, they just can't be free parts from sponsors
Rev it up "a little bit" = ~5000 rpm.
I fully approve. :)
Challenge him to a "small burnout" next time.
did the small burnout already .lol
Isaac it'll be fine
I saw. :) Quite the smoke show in that drone shot. Well done, sir.
lol. thanks
I had one of these when I was a kid. They were sold at Costco around 1999-2001.
"rev it up a little bit!" **cat sprints for safety in the background**
Carb needs a cleaning. "Just put a new motor on it." 😂
My thoughts exactly I've cleaned carburetor a lot worse shape than that I'm sure. Parts cleaner would be the best but you can still do it by hand that's why they make carburetor cleaner. I have had a few carburetors that were too far gone but you can get one from China for twenty thirty dollars.
Lol right
my predator needed its carb cleaned, so I bought a new one for $8 on amazon free shipping xD
This one is the coolest yet!! The rear axle was really bent before I don't think it got any worse after the "EPIC" jump!! I bet Isaac it'll be fine's whole life flashed before him!! lol!!Wuuuuu doggie!!!! Looks like it ever so lightly reached 30MPH. Would have gone faster if you would have let it!! Nice catch guys!! Keep on cart'n!!
thanks
you could see the axle bend when you first started it at the beginning of the clip and it looked to be bent in about the same spot. I think you overpaid by about $10 dollars because of the bent axle. Give it a V8- and it'll be fine
I enjoy looking at the past adventures as much as the current ones. Birth of the Murray. One of my favorite carts. Kids, I seen this very video when it was new and I was younger. I just might need a nap later.
That thing needs the 670!
yesss that would be awesome to see. it'll tear shit up
i would LOVE to see a 670 on this thing!!!!
I've seen the same model buggy on another channel with the same engine and, yes you are certainly correct
Lol I was about to say the same thing
no it needs a ski-doo rotax 670 snowmobile engine
3:12
"how high do you want it?"
"colorado high"
LOL
Kent Kollath Ike is for sure a stoner
@@chasemorgan2510 i think they both are!!!
You can about tell 😆
I've watched several of your videos, but after watching the one where you ran over the bush, I had to subscribe. You guys remind me of myself, you must be Texas boys.
or just guys that like to have fun
LOL... Ike is from TX.
I lived there for 9 years
^^ my battery is on 9%
I feel em all... punny joke this bitch is....
15:35 nice camerawork there ;)
11:42 the guy outside the door made me laugh so hard.
At 11:19 did you see him in the window
I saw him to
11:15 guy looking through garage window he creepin
Wtf isit a weirdo??
12:24 he notices hes spotted and ducks lmao
Ya'll know more than me but I swear that axle was bent before ya took it for the first test drive.
I agree, when they first started it up on the jack before swapping the motor it sure looked bent to me.
Yea its bent when the engine was running is was wobbling and swaying
First thing I noticed was it being bent to hell
It's has an accordion type plastic over the axle, makes it look wobbly when it runs.
In saying this, it still is bent
this was a funny one. the tweaked rear axle is priceless!
two hundred bucks plus the donation of an engine=cheap entertainment to be sure ;-)
11:20 to 11:40 what's with the window creeper ?
The camera angles are on point
axle was bent at the start. mod it for more suspension travel. Use a bigger axle. Adjust front end so the steering isnt toe-ed in so far, you will have less bump steer. Also the single a-arm front is hurting steering performance.
I still can't believe I bumped into you guys at Krispy Kreme during mustang week in Myrtle Beach that was super sweet a true pleasure guys keep up the good work !
it was a pleasure meeting you
it was bent pretty good when you 1st started it if you watch the video at 5:30 into it
Hahaha!!! Bro the cat knew, that truck has a monster in her lol 😂😂 😂
The axle was bent before you even rode it. Saw it up on the jack
Ben Peter i saw too 5:40
Ben Peter I saw that too
"Alright, I need a Drink!" LOL. What a Legend.
BTW Nice find guys!
get another axle and put a third bushing i the middle , jump that thing it was made for it . It is just you are heavyer than a 12 yr old . And " it'll be fine"
that's what I was thinking
+Isaac it'll be fine do you think I should open header my Tecumseh 6.0 horsepower on a similiar kart but it's getting blow by and is losing power by the foot that it moves
+Isaac it'll be fine v Twin on the off-road cart
Also both my Tecumseh motors a gunk in the carb
Nova Bro itll be fine. lol
Thumbs up on the new camera set up. Awesome videos love this channel!!
I can't wait til u guys get ur own TV show. it will be better than most of the crap on these days.
This color reminds me of my friend’s Razor Scooter. We would have a blast riding our razor’s together and I have a Red MX 400 Razor Dirtbike in red.
Who's the weird guy who peeks in the garage at 11:43 it really weird sorry if I'm not the first one to comment this
Spooky!! was that the grounds keeper??!! lol!!
whatever it is, it scared me
he's in the window at 11:16 as well... spooky
hold on, its joel
+Kuruma Designs lol
It's a Murray!!!!!!!) my first mower was a Murray, probably still running, mowing grass somewhere. Don't know about there new products, but there old stuff is tuff as nails !!!!
Rear axel looks bent need to fix that lol btw im only at 6:01 incase yall say anything about that
obvi u not cuz u edited it in
Rear axle is bent
Nick Timar yea i said that why is there a problem? Lmao
Alpha smurf What about your cousin?
Alpha smurf *obviously you are not because you edit your comment* Lol go back to school
Just got one yesterday seems more lifted though all I need is a throttle cable and will be good to go
What site do u use to measure mph
Garmin Virb camera.
Cochise ramos-gonzalez i just noticed that too
I watched the rear axle before you changed engines, the axle was bent as bad before you changed the engine.... also looks like the deck the engine sits on might need to be welded?
good gokart ... nice landscape too... like
great go kart find and fun video! The axle was definitely already bent before the motor swap. Of course....those jumps didn't help either, lol !! Keep up the great work guys !
Now you guys have to do a off-road cart trail ride
Best go cart find ever!!!!!!
When you first fired the Tecumseh I could see the axle was definitely bent.
Lol I know right looks like it’s corkscrewed
HOLY CRAP I HAVE THE SAME GO KART!!!! expect its lime green that's so cool!!!
what kind of camera stabiliser please? Cheers
DJI Osmo
I have been watching your channel for a while and now I have 4 go-karts for my grandkids and 1 hand built by me I call it the wiidow maker
It had a bent axel wen you start on the other engine
LMFAO seeing the cat bolt! And I love cats. Got his or her heart rate up. You just added 1 life to that cat with one simple (and awesome) 3 second rev. I am so glad you caught that on the vid. Anyway! On to the nuts and bolts of this feature.
Notice the guy in drown peek around the wall on. 11:456
I've been searching for a Murray Kilowatt since y'all have posted this video and I've had no luck... y'all always find the cool stuff
that was an awesome video and im still working on my go cart, i just need an engine and a clutch.
Yeah me too, Im getting close, just need an engine a clutch and the body of the cart, and maybe a few wheels
I bet your neighbors are thrilled!!
11:16 there he is again!!😹
do a givaway of your older RUNING go kart that would make this the best channel
I fkn love this channel, probably my favorite youtube channel
thanks
+Isaac it'll be fine great video... if you are ever in Mississippi look me up... I got a mini bike I built...wanna race?
ok
good to see these suppliers recognizing the value of social media options. Give one, sell 10 ........
bike engine on that would be awsome with 5 speed
I already built it. Suzuki LT230E 5 speed on a yerf dog. It's SAVAGE
Gonna build a sequential cbr 900rr fiat 126 rally car
Hi Guys, I noticed the bent axle before you drove the Murray, so Ike didn't bend it or even make it worse. Good videos keep it up. Regards, Ian.
btw A+ for the camera man
Man I used to watch y’all when I was in elementary school and now I’m going to my freshman year
U see the creepy guy look in through the door at 11:32 😂
Boy would I like one of these. Would definitely need a storage unity for it.
U guys are awesome u just got a new sub! xD
Nice environment to live in. GPS won't work too well under trees. Fun!
Put a v twin on it 👍
Hey John. Do y'all still have the factory plastic Torque Converter covers for the Kilowatt? I'd be willing to buy them to restore mine
see the person in the window at 11:16
that wasn't creepy at all
Today I Got a go cart I found on the side of the road for free that had sat in a paddoc for 3 years to start with a bit of fuel and $5 worth of fuel lines. I'm excited to shred around the neighbourhood
11:15 Creeper in the window
Where can I find a link to hear those open headers on Ike's truck if you don't give me a link that's just an American🤣
did anybody see the guy at 11:43 at the doorway just peaking like #creeper
I have the exact same buggy with the predator. Did you buy it with a belt drive or did you switch to straight chain
Put 670cc on it double turbo it will be assume
Matas Jarutis you sound like a fan boy 😂😂😂 double turbos 🤦♂️🤦♂️
What camara used and how they manage to appear the graphic of speed in the video?
Thanks in advanced
you guys should put a snowmobile engine on a go kart
that's a scarily fun sounding idea!!😈👿
+RagingDERPY yes it is
wh ythats absolutly pointless they are loud and not as fast as u think unless there 1 liter engines dumb ass
kgnmetal bruh
+Alpha smurf what the fuck are you talking about there not slow
Jam the 420 with the turbo and the efi in it 😎
Could be something 😉
1 foot of air "you got a lot" and then theirs a creepy man in the video popping in ....😬
I like it. I'm thinking of finding a Murray and moding it up a bit, more so like a higher stance and a slightly bigger motor. but great find
I LITERALLY HAVE THE BEST PURCHASE EVER!
2 OFF ROADING GO KARTS! 10HP!
For $100... BOTH!
In my country that will cost close to 1000 dollars
theycallmezol they were probably used
Currently in the middle of a build with my son. We watch everything you guys post. Do you know if we can find a 301cc predator with a hemi head?
670 would be cooler on this
How do you guys find so many cheap carts? Where do you look to find them?
it was bent before you took it out review the vid when it was on the jack
Where did u guys find that for 200 dollars?! In my area people are trying to get rid of something like that for in between 600 and 1000 dollars not running and driving.
How about you add the price of the engine you're putting into it and all the other parts you're using instead of just click baiting 200$
$200 for a chassis pretty much
When they said 200$ they meant for how much they paid to get it not upgrade it/fix it
@@Someaussiewavz i was 15 years old when i made that comment. And it still stands. It's still fucking clickbait. "hey we bought this chassis for $200...here's an entire engine we put in, plus whatever it didn't have." its stupid
@@aricroy4258 I guess you do make a point
What’s the big deal lol ain’t gonna hurt you 😂
Any possible chance y'all still have this? I'd be pretty interested in it 🤞🤞🤞
put a 670 on it
The guy peaking in the garage is funny lol
Is it just me or is the rear axle bent? I noticed it during the original engines test and when he was driving down the road and the go kart was bouncing
I saw it had a bent Axel in the beginning of the video. Do y'all take the gov'ner out of those Predator motors?
$200!!
Oh yeah...inflation 😩
by this late date, there probably no questions remaining. anyway, at 5:39, some bend in the axle is seen. it seems like the sprocket impacted the ground, such that the existing bend was increased. cheers
Ya the axle was bent already, noticed that when you were swapping engines. Fenders be good too, you will tire of getting constantly splashed. I foresee a bunch of messy trails in your property lol.
So for the Predator 212, i should get the 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine, EPA/CARB?
Crazy how far you guys have come! Wonder what Charles was doing that day? Lol.
Pretty badass & a great find
Rich parents and one camera strikes again lol SWEET!!
those sunglasses the orange- yellow color looks great
U lucky Aholes. What a great find!!!!
that chevy is the sexiest sounding truck I've heard in a while
The things got compression and it's got spark and runs on ether all I need is that float needle to slide up and down so I can get gas in the bowl and the bolt holding the ball is actually the jet clean that out at the run like a champ
Your production quality is improving. Thanks guys. :-)