Yes, it was. I highly recommend anyone to buy some custom length cables. The ones in the Corsair kit are too long, and you have to do a lot of work to make it look reasonable. Thank you for the comment 👌
Look clean!! I just set up a CH160 build a few days ago, and my cable management is a complete mess compared to this 😆 This was my first ever build though so I don't have any experience with how to deal with the cables. I struggled to get the GPU in because of the cables coming out the bottom of the PSU. I noticed you switched the PSU to the front of the case rather than front, side. That means you give up the front case fan but maybe it's better for cable management.
It was very painful to get the cable management to a reasonable point. Yes, I did flip the PSU to the front and sacrificed the front intake fan, but temps are more than comfortable at a max 68/74 on CPU and 69 on GPU in gaming. The TUF GPU made it really difficult to cable manage but I used the channel behind the GPU to run any excess cable lengths. Hope this helps. Thanks for the comment.
Should've go with SFX instead of SFX-L, man. That CPU and GPU combo doesn't need 850 watt PSU. That way you can mount it on the side and then put an intake fan on front. That cpu cooler will not get any fresh air, combined with hot air from the gpu it will create a bad scenario. Nice video though. A question, do you think a Sapphire Nitro+ RX7900 XTX will fit in that case? A friend ask me to set up his PC with that card as the main hardware and he wants a small to medium foot print pc on his desk. Thanks.
that card will definitely not fit this case. the CH160 is limited to 305mm GPUs, the Sapphire Nitro+ RX7900 XTX is 320mm in length. source: i have that card.
Thank you for the comment 😊. Yes, I agree with your opinion on the front fan and PSU placement. This is not the optimal layout for thermals and was done for aesthetics and working with what I had. Also, as per the comment below, the max GPU clearance is 305mm. The TUF fits with a 2mm gap to the front pannel, hope this helps 👍
@@standard_hardware ty for replying. I really like the aesthetic of that case and my friend had similar taste to mine, he probably would love that too. Too bad. I've been looking at Fractal Torrent Nano but I'm not really sure. 😁 Anyway thanks again.
![[Sub Thai] APT. - ROSÉ & Bruno Mars](http://i.ytimg.com/vi/bYjhzP8x_uc/mqdefault.jpg)
cable management must have been hell with that little space, great video, and nice build
Yes, it was. I highly recommend anyone to buy some custom length cables. The ones in the Corsair kit are too long, and you have to do a lot of work to make it look reasonable. Thank you for the comment 👌
Great to see a new video!! 🔥
Looks awesome
Clean as ever 💪🏽💪🏽
🔥🔥🔥🔥🔥🔥
That's ace mate
clean
Look clean!! I just set up a CH160 build a few days ago, and my cable management is a complete mess compared to this 😆 This was my first ever build though so I don't have any experience with how to deal with the cables. I struggled to get the GPU in because of the cables coming out the bottom of the PSU. I noticed you switched the PSU to the front of the case rather than front, side. That means you give up the front case fan but maybe it's better for cable management.
It was very painful to get the cable management to a reasonable point. Yes, I did flip the PSU to the front and sacrificed the front intake fan, but temps are more than comfortable at a max 68/74 on CPU and 69 on GPU in gaming. The TUF GPU made it really difficult to cable manage but I used the channel behind the GPU to run any excess cable lengths. Hope this helps. Thanks for the comment.
8 pin cpu питания хватает для 7800x3d? нету проблем с нехваткой напряжения?
Should've go with SFX instead of SFX-L, man. That CPU and GPU combo doesn't need 850 watt PSU. That way you can mount it on the side and then put an intake fan on front. That cpu cooler will not get any fresh air, combined with hot air from the gpu it will create a bad scenario.
Nice video though.
A question, do you think a Sapphire Nitro+ RX7900 XTX will fit in that case? A friend ask me to set up his PC with that card as the main hardware and he wants a small to medium foot print pc on his desk. Thanks.
that card will definitely not fit this case. the CH160 is limited to 305mm GPUs, the Sapphire Nitro+ RX7900 XTX is 320mm in length. source: i have that card.
Thank you for the comment 😊. Yes, I agree with your opinion on the front fan and PSU placement. This is not the optimal layout for thermals and was done for aesthetics and working with what I had. Also, as per the comment below, the max GPU clearance is 305mm. The TUF fits with a 2mm gap to the front pannel, hope this helps 👍
@@jens468 oh dang. That's too bad that, case look really good.
@@standard_hardware ty for replying. I really like the aesthetic of that case and my friend had similar taste to mine, he probably would love that too. Too bad. I've been looking at Fractal Torrent Nano but I'm not really sure. 😁
Anyway thanks again.