HAHAHA!!! A Skilsaw 5150 was the first big power tool I got when we bought our first house. That thing has made my life easier for twenty years, from decks to fences, to stairs. Mine was US-made which they aren't anymore, but they're still great tools.
Be sure to get a cordless one if you want a really intimidating blade for urban survival. A little heavy for EDC tho' - so I wouldn't bother looking for one with a pocket clip. Like whip it out only for SHTF. The Ent uprising must be nipped in the bud - I see them gathering in green-spaces, just looming all broody and shit. This could get ugly.
Kudos for the video content! Excuse me for chiming in, I would appreciate your opinion. Have you considered - Schallingora Dexterous Programme Scheme (search on google)? It is a great one off guide for building any shed in no time with no experience minus the normal expense. Ive heard some interesting things about it and my BF at last got excellent success with it.
Great video! Love the enthusiasm. Next time a friend comes over to watch a funny movie, I will tell them I have something better. Then proceed to show them this hilarious video. I am not a contractor, just a woodworker, DIY kind of guy. For my needs, you can't beat the reliability and power of the corded Makita circular saws. They are built to last decades.
I gotta say I use the flexvolt worm drive style and have used quite a few on the list. Dewalt got it done here, that saw is a beast and my personal favorite. I'm with nick on that!
Josh B yea it is a spendy saw but really the 18v will get the job done too. Pretty much all of these companies have good saws and just keep upgrading constantly to out do one another. Doesnt mean their older models are bad, just a bit slower or cut out a time or two. And I agree Austin Manion, I think dewalt really did equal corder power!
Mike N yeah the 18v is still one of the best out there, absolutely destroys makitas shit. But sometimes i want a little extra power, but i refuse to buy corded 😂
The reason for two 18v batts for the Makita is that you can charge both batts at the same time in 45 mins or less, whereas those bigger "red" an "yellow" batts take almost two hrs to charge. Time is money!
Time is money. Buy 2 Dewalt 9amps and have one charged while one is working. By the time one dies you'll have another one in the tool. Makita requires you to have 4 whole batteries going
@@sessionbox4256 a single dewalt 20v doesn't have as much cutting power, or make as many cuts as a makita double battery. You may have half as many batteries, but you'll make twice as many trips to the battery charger, and it is a nuissance to have a battery die when you're up on a roof, or a ladder, or scaffold. When a person uses cordless circular saws every day, those walks to the charger add up quick, and the batteries can even pay for themselves. Plus, the makita cuts deeper, it's the only saw I know that cuts 2 5/8" depth, which is what's required to cut completely through LVL floor joists (not even corded skillsaw does that, nor dewalt).
There's a reason that many tradesmen refer to circular saws as "skillsaws". I've actually met quite a few that didn't even know they were actually called circular saws. Skilsaw has been around forever, they made them first and they made them right. Skilsaw is to the circular saw what advil is to ibuprofen.
He had me at Ryobi (9:45) I actively avoided Ryobi for the exact reasons he mentions. It looks cheap, ugly, and amateur, but I had to borrow my brother-in-law's miter saw to install some flooring and was genuinely surprised by how much I liked it...so much that I had to go out and buy my own. It's now one of the most loved tools in my shop.
i own a whole set of Ryobi. It gets the job done even though they arent the best on the market. I would go with Milwaukee or Flex but i don't have the money to shell out for the best of the best
I bought a Cobalt sliding compound miter saw and it's amazing. It's going on 9 years and still good. Also the Cobalt air compressors are really good. The problem with cheap tools is not the tool. It's the battery. The battery is the most important part of a cordless tool. Corded tools you can get away with some cheap tools. My cordless Ryobi tools the batteries died in months. I'll never buy them again. Milwaukee batteries last decades.
The serious dedication to tool education= rapid hand movement and minimal blinking =loved this video, he kept my attention, so this gal appreciates your hard work!!! off to home depot I go lol
I’m a fan of my Milwaukee and DeWalt tools. However, my father in law uses Ryobi and I used them for the first time this weekend and they are pretty good. Nice work Nick.
This is the first time I’ve seen your channel brother, you are absolutely hilarious while being completely informative LMFAO! You literally have me cracking up every 20 seconds or so lol.
My favorite saw will ALWAYS be the Dewalt 378G. That saw looked funky as hell - look it up. But I never used a saw that lent itself to working on the ground, one hand use ripping plywood, or cutting tops off vertical beams in the air so effortlessly. It was the perfect combination of a Skilsaw and a sidewinder. They discontinued it, I patched the cord 5 times, replaced a plug, and cracked the handle and re-stuck it on with gorilla glue. Somehow between my dad and I, it's still alive 20something years later.
You are awesome! I am a Ryobi fan and I know they do better in certain areas than others when it comes to their tools but when you started with the Mr. Sister hahah I rewatched that part like 10 times. Great job!
The couple times the other guy was changing out the saws on the bench, was holding back his laughter 100% This guy is hilarious. It became a little much near the end but he made me subscribe to this channel. Can't wait to see more. I watched this video already knowing skilsaw was the best. Hilt is good too, but I usually see them with the powder actuated nail guns. I think the video was pretty spot on to be honest. Good job
There's no way I'd spend 33 mins watching a crappy video. You were brilliant. I was scared to buy one of those bad boys. Now I'm gonna get a Matika! Thanks a million❤️
I am invested in the M18 Fuel line, and I love my circular saw. Built barns, houses, additions, and I've never had an issue with it. Lasts almost all day with a 12 AH battery. And believe it or not, I still use my dad's old corded Craftsman once in a while that he got back in... I think the 70's. No bells or whistles like newer saws, but it's all metal, no plastic and just... solid. It still runs like a champ.
I appreciate the whole spectrum being exercised. Anybody can test drive a bunch of Ferraris and give an opinion. I wouldn't even have the patience to test the first two classes. You guys actually worked and dealt with honest unpleasantness. Thanks fellas.
What is the type/name of the wooden post/beam/board at 32:23? I've never seen that exact type of wooden beam before. It appears to be long, thinner pieces of wood (probably the trimmings left from cutting other boards to correct dimensions, I assume?) That are soaked in some sort of glue or resin mixture, and them mechanically/hydraulically compressed into a mould, of whatever the desired dimensions are. Is this somewhat correct, or am I way off with my assumptions here? Any help would be very much appreciated!
Amateur saw guy here. I got a cheaper Ryobi cir. Saw from Home Depot last yr, threw box away and just discovered defective adjustment lever. Is Ryobi any good at replacements ?
It’s is Rindoculous!! Robert Bosch use to own it all night long! ! BUDDY YOU WERE AWESOME!!! And educative as well. It’s the first video I watch from VCG uninterrupted by text messages. I still prefer my Milwaukee Fuels m12 & m18 Keep it going. ENCORE, ENCORE!!
@17:10 just got the Makita Mate, and they threw in 2 extra 5.0’s for $249, how you feel about it now? I also have the M18 rear handle but I’ve heard the makita is better.
Can u do a vid on die grinders? I got rid of my Makita 18V die grinder since it vibrates so much... Did I just own a bad one? My dies were brand new and true...
My first VCG video and hooked. Entertaining and informative. I've moved to Taiwan so need to purchase new hardware, over here is 120V and as I'm from the UK, it's 240 over there. Any reviews on jigsaws? Again, great video and well worth watching.
Update: I bought a Milwaukee fuel rear handle circ-saw. I’ve always used a sidewinder and I love the rear handle. The upside of the rear handle really shows on long rip cuts, it’s way easier to keep a straight cut for me.
Wow! Great job on this one. Great energy. I got into this channel because of Vince and his reviews. Entertained and educated by Nick... My gf even checked out the video.
Great choice for number 1. I use a skilsaw worm drive every day building fence. Had mine for years, it's taken a beating and it's still performing better than the brand new harbor freight junk that the new guys bring in. Definitely a must-have for anyone who's serious about their craft👍💯
Informative video! I am on a budget and looking for my first saw. I am interested in the corded Ryobi circular saw. I noticed on the Home Depot website, that they have 13 Amp, 14 Amp, & 15 Amp versions. Other than their 1 Amp differences and pricing, should I just get the cheapest one (13 Amps)? What's the noticeable difference from 13 to 14 Amps, or 14 to15 Amps? thx
OTAAAY I watched the whole video and I am blown away - want to purchase a circular saw as a gift to my husband as we just purchased land - so many great choices I’m going check the #1 choice on your top list Skill Saw - he WILL be surprised and to think I was going to buy WORX you didn’t even mention it 😂 THANK YOU THIS WAS FUN TO WATCH
I have to say I couldn't wait and skipped to the end to see which was deemed the best circular saw on the market in Expert Class and was so happy to see we agree because I just bought the new worm drive cordless 71/4" Skil. I have been out of the carpenter trade for well over a decade and am sorry to hear some say the brand declined a bit for awhile but I never saw any other circular saw used in the Carpenters Union and I was in for nearly ten years 👍
midnightwolf this video is just for circular saws though. I mean I can’t say I’ve noticed any difference in placement from their other ranking videos, but that’s doesn’t mean there won’t be.
From an Aussie, down here we have the 3 big brands on site. Dewalt, Milwaukee and Makita. They are the 3 main ones down here. Makita is the cheaper of the bunch so a lot of apprentices start with it. Our cheap once use brand is ozito so if you look them up you can see our 'worse' and they aren't that bad, probly same level as ryobi one
Well, I use that 36volt Makita saw...It has a magnesium base, rafter hook, Yes its heavy, but I've also used the Milwaukee Saw too and it's no lighter. With all the same features. The single battery shown was the 12 amp hour battery that is just as heavy as 2 Makita batteries. I've also used the Dewalt saw with the Flexvolt battery. Great saw but not any better than the Makita or Milwaukee. Also you might talk about the prices of these options. That 12.0 High output battery Milwaukee makes is over 250 bucks. 2) pack Makita 6 amp batteries cost 180. So these 3 saws are equal in every way in my opinion. I am not a fan of Metabo at all. My business partner bought some new tools from Metabo, he sold them after a week. Went back to his Ridged. Hilti tools are great tools, but if you can afford them, you don't need to work for a living. I've never used the Skill Saw battery saw. I have an old worm drive Skill Saw that you have to put oil in and change it sometimes. It is a beast!!! I bring it out to rip hardwoods and yellow pine posts and beams. I totally agree with that old saw being the best ever made!
"Don't be biased"?! We call came here to inform a bias. I want to know what's good and then be biased towards good. Having said that, I've tried Ryobi tools many, many times and they have always disappointed me.
Is this Nick's audition video for a WWE announcer, Lol, the hand flailing is incredible, he looks like an orchestra conductor of the beautiful sounds of the circular saws, show them the tool passion Nick!! Lol👍👍
Dude, I just got back from the store 35 mins ago with my 7 1/4 milwaukee m18 and boy oh boy... pretty bad ass .. just saying I haven't used the one you have yet tho 😕
Someone call the WWE they are missing a carpenter.
"In the blue trunks, we have the Kanye Of Carpentry, ..."
Lmao was just thinking the same about how he spoke
haha, right on dude! this guy is high octane!
"THE CARPENTER "
I don't even need a circular saw but I feel like if I don't go out and buy a Skilsaw my life might be in danger.
HAHAHA!!! A Skilsaw 5150 was the first big power tool I got when we bought our first house. That thing has made my life easier for twenty years, from decks to fences, to stairs. Mine was US-made which they aren't anymore, but they're still great tools.
@@michaelandcolinspop i have a 5150 the bearings died
Be sure to get a cordless one if you want a really intimidating blade for urban survival. A little heavy for EDC tho' - so I wouldn't bother looking for one with a pocket clip. Like whip it out only for SHTF. The Ent uprising must be nipped in the bud - I see them gathering in green-spaces, just looming all broody and shit. This could get ugly.
You will
@@michaelandcolinspop us made? I'm jealous bro
The number one selling single use diy circular saw of all time is:
The Pizza cutter.
Juan C 🤣🤣
😂😭🤣💯☠️☠️☠️
My pizza cutter still going strong. Multiple use.
😂😂😂
I just 💯 ☠️☠️😂😂🤣🤣
Ryobi's new pitch phrase "Ryobi. Better than it looks."
I just threw up in my mouth. I've got a ton of Ryobi from 10 years ago
RYOBI built to throw in the trash
Lol. That was your mom's pitch phrase back through high school bro
He progressively gets angrier as the video goes I don’t know why.
Well see, that is because you are a delicate little snowflake
More money being spent! Hate spending the money!
Kudos for the video content! Excuse me for chiming in, I would appreciate your opinion. Have you considered - Schallingora Dexterous Programme Scheme (search on google)? It is a great one off guide for building any shed in no time with no experience minus the normal expense. Ive heard some interesting things about it and my BF at last got excellent success with it.
He's only reading your body language, bud: You're just making way too much eye contact. Makes him edgy.
The kid gets excited about his circ saws. LoL
As an Australian I can confirm this is what we sound like on the job site 😂
Love that Vince is bringing some of the items out as your talking about them
Great video! Love the enthusiasm. Next time a friend comes over to watch a funny movie, I will tell them I have something better. Then proceed to show them this hilarious video.
I am not a contractor, just a woodworker, DIY kind of guy. For my needs, you can't beat the reliability and power of the corded Makita circular saws. They are built to last decades.
Yeah the corded Makitas are indestructible. I liked the corded Milwaukee sidewinders before they started making them in China around 2006.
Witness!
Thanks for sharing that. I'm a total amateur DIY'er shopping for my first circular saw and after hours of research had arrived at the same conclusion.
I gotta say I use the flexvolt worm drive style and have used quite a few on the list. Dewalt got it done here, that saw is a beast and my personal favorite. I'm with nick on that!
Mike N i really wish i got the flexvolt one, i got the 18v because it was cheaper
I’ve used the flex volt worm drive style for the past 3 months and it’s insane, feels like it has more power than my corded skilsaw
Josh B yea it is a spendy saw but really the 18v will get the job done too. Pretty much all of these companies have good saws and just keep upgrading constantly to out do one another. Doesnt mean their older models are bad, just a bit slower or cut out a time or two. And I agree Austin Manion, I think dewalt really did equal corder power!
Mike N yeah the 18v is still one of the best out there, absolutely destroys makitas shit.
But sometimes i want a little extra power, but i refuse to buy corded 😂
@@joshbenton810 I agree, the cord gets annoying. I do own the mag 77 and enjoy it but only use it when its convenient
The reason for two 18v batts for the Makita is that you can charge both batts at the same time in 45 mins or less, whereas those bigger "red" an "yellow" batts take almost two hrs to charge. Time is money!
Quick charge units shorten that time on those bigger batteries
Time is money. Buy 2 Dewalt 9amps and have one charged while one is working. By the time one dies you'll have another one in the tool. Makita requires you to have 4 whole batteries going
@@JohnDoe-hn5nl quick charge shortens the life of the battery.
@@sessionbox4256 a single dewalt 20v doesn't have as much cutting power, or make as many cuts as a makita double battery. You may have half as many batteries, but you'll make twice as many trips to the battery charger, and it is a nuissance to have a battery die when you're up on a roof, or a ladder, or scaffold. When a person uses cordless circular saws every day, those walks to the charger add up quick, and the batteries can even pay for themselves. Plus, the makita cuts deeper, it's the only saw I know that cuts 2 5/8" depth, which is what's required to cut completely through LVL floor joists (not even corded skillsaw does that, nor dewalt).
@@user-os7qp3ny3k then get a flexvolt battery.
These types of videos are honestly the best of this channel! Great video, keep making these!!
There's a reason that many tradesmen refer to circular saws as "skillsaws". I've actually met quite a few that didn't even know they were actually called circular saws. Skilsaw has been around forever, they made them first and they made them right. Skilsaw is to the circular saw what advil is to ibuprofen.
Agree, Skillsaw wormdrive corded are the best and most durable
He had me at Ryobi (9:45) I actively avoided Ryobi for the exact reasons he mentions. It looks cheap, ugly, and amateur, but I had to borrow my brother-in-law's miter saw to install some flooring and was genuinely surprised by how much I liked it...so much that I had to go out and buy my own. It's now one of the most loved tools in my shop.
i own a whole set of Ryobi. It gets the job done even though they arent the best on the market. I would go with Milwaukee or Flex but i don't have the money to shell out for the best of the best
I bought a Cobalt sliding compound miter saw and it's amazing. It's going on 9 years and still good. Also the Cobalt air compressors are really good. The problem with cheap tools is not the tool. It's the battery. The battery is the most important part of a cordless tool. Corded tools you can get away with some cheap tools. My cordless Ryobi tools the batteries died in months. I'll never buy them again. Milwaukee batteries last decades.
Ryobi lacks power though
Just don't buy the finish nailer. Damn thing can't help but stop working.
I LOVE my RYOBI Reciprocating Saw.
This guy is hilarious, I watched the whole thing and learnt so many hand gestures.
Can not be unseen 🤣
Watch it in 2x speed!! Lol
hahahahahahahahaha 🤣🤣🤣🤣
I was about to say.... what's going on with his hands?
I'm South American, hand gestures are our vernacular so I didn't notice, until now, daim.
The serious dedication to tool education= rapid hand movement and minimal blinking =loved this video, he kept my attention, so this gal appreciates your hard work!!! off to home depot I go lol
Thank you!
This guy is great! Laughed through entire video while learning something!
I’m a fan of my Milwaukee and DeWalt tools. However, my father in law uses Ryobi and I used them for the first time this weekend and they are pretty good. Nice work Nick.
This is the first time I’ve seen your channel brother, you are absolutely hilarious while being completely informative LMFAO! You literally have me cracking up every 20 seconds or so lol.
My favorite saw will ALWAYS be the Dewalt 378G. That saw looked funky as hell - look it up. But I never used a saw that lent itself to working on the ground, one hand use ripping plywood, or cutting tops off vertical beams in the air so effortlessly. It was the perfect combination of a Skilsaw and a sidewinder. They discontinued it, I patched the cord 5 times, replaced a plug, and cracked the handle and re-stuck it on with gorilla glue. Somehow between my dad and I, it's still alive 20something years later.
You are awesome! I am a Ryobi fan and I know they do better in certain areas than others when it comes to their tools but when you started with the Mr. Sister hahah I rewatched that part like 10 times. Great job!
I like these kind of vids. Nick's hand movements made me think he was conducting the orchestra.
lol i was thinking same thing.. thought i said it first.
it's a philly thing. everyone is fluent in sign language
The couple times the other guy was changing out the saws on the bench, was holding back his laughter 100%
This guy is hilarious. It became a little much near the end but he made me subscribe to this channel. Can't wait to see more.
I watched this video already knowing skilsaw was the best. Hilt is good too, but I usually see them with the powder actuated nail guns. I think the video was pretty spot on to be honest. Good job
There's no way I'd spend 33 mins watching a crappy video. You were brilliant. I was scared to buy one of those bad boys. Now I'm gonna get a Matika! Thanks a million❤️
You go and buy yourself your matika sir, once you arrive at the store, ask for their best matika circular saw
I bought a Chicago Electric circular saw once. It lasted roughly 6 cuts on 2x4s, then it let the magic smoke out.
Really enjoy watching Nick losing his mind. Even my wife was laughing 😂
Matt Ellermets this dude is hilarious
My wife walked in the room just as he said something about not hurting your "wenis" in relation to power tools.
Did you put the hart in the single-use and DIYs/ category
I am invested in the M18 Fuel line, and I love my circular saw. Built barns, houses, additions, and I've never had an issue with it. Lasts almost all day with a 12 AH battery.
And believe it or not, I still use my dad's old corded Craftsman once in a while that he got back in... I think the 70's. No bells or whistles like newer saws, but it's all metal, no plastic and just... solid. It still runs like a champ.
"Invested" hmmm interesting
@@adnan9520 yup he never said his circular saw was a m fuel saw !!!
What do you think about Makita DSS610 saw?
If you watch this video muted, Nick is leading the band! Jus kiddin good job great vid!
I appreciate the whole spectrum being exercised. Anybody can test drive a bunch of Ferraris and give an opinion. I wouldn't even have the patience to test the first two classes. You guys actually worked and dealt with honest unpleasantness. Thanks fellas.
It's the skilsaw saw that I saw not the skil saw that i thought I saw.
What is the type/name of the wooden post/beam/board at 32:23? I've never seen that exact type of wooden beam before. It appears to be long, thinner pieces of wood (probably the trimmings left from cutting other boards to correct dimensions, I assume?) That are soaked in some sort of glue or resin mixture, and them mechanically/hydraulically compressed into a mould, of whatever the desired dimensions are. Is this somewhat correct, or am I way off with my assumptions here? Any help would be very much appreciated!
never scene some 1 move their hands for every word they say, for 20 minutes straight. Did learn something new lol👍
😂😂👍🙌🙌
I thought he was orchestrating us haha
I was in a trance the whole time.. got me speaking Australian now and I ain't even leave my quarantined home
Kids do.
Check out Scotty Kilmer, he does car videos, if you want to seem some wild hand moving. 😂
First of all, I want what he's on. Second, he needs to do every infomercial. Love it. Love the vibe he gives off watching the video.
Skilsaw is by far the best.... like a sore peter.... hard to beat!!!
It's cool that he does sign language all the way through the video. I'm sure the deaf people really appreciate that. Love you too man!
Agreed with your list..Next ranking up the impact wrench 👍
I have owned a Craftsman 71/4” Circular saw for years and it does a great job.
Wen it breaks due to your Skil level don't get Black and Deck her. Maybe-tabo you have your warranty in Milwaukee
@@raul0ca I have had that Craftsman 7/4 circular saw for along time and it does a great job and I ordered the replacement cord and fixed it myself.
@@raul0ca I will not own a black and decker power tool.
@@johnkozlowski7642 I''ve done that too
Heeey looks like mac miller didn't die after all, he just became a contractor lol. Handy Mac!
Amateur saw guy here. I got a cheaper Ryobi cir. Saw from Home Depot last yr, threw box away and just discovered defective adjustment lever. Is Ryobi any good at replacements ?
I do love my Metabo HPT / Hikoki C7BUR with e-brake... It's been a great tool in my DIY-shop.
Not sure where it lands on the list, but I love it! :)
It’s is Rindoculous!!
Robert Bosch use to own it all night long! !
BUDDY YOU WERE AWESOME!!! And educative as well. It’s the first video I watch from VCG uninterrupted by text messages.
I still prefer my Milwaukee Fuels m12 & m18
Keep it going. ENCORE, ENCORE!!
Dewalt is my brand of choice and the flexvolt has performed phenomenally for me for 2 years no regrets.
I’m with ya man but I would love to try the cordless worm drive by skil too
I have all de walt tools too but have burnt up several of them unfortunatly
I like dewalt too but if there both same price for new better technology I want to try it
@17:10 just got the Makita Mate, and they threw in 2 extra 5.0’s for $249, how you feel about it now? I also have the M18 rear handle but I’ve heard the makita is better.
I think Nick needs a Gatorade after this one to replenish his energy because he was so passionate in this video
😂😂👍
Love You Bro! Thank you for making this video. Very Informative Much Appreciated!❤️😀👍
I believe that he is the illegitimate son of Ultimate Warrior...
😂😂👍😂
😂😂😂
I was entertained and I’m not even a Carpenter but I am looking to buy a circular saw so this will give me some good tips. Thanks! Yes I shared it!
Thank you for the awesome feedback and support Lillith!!
Framer experience Yeah skill saw the best of all time I use deWalt flex volt it’s a beast and makita has an awesome balance
Can u do a vid on die grinders? I got rid of my Makita 18V die grinder since it vibrates so much... Did I just own a bad one? My dies were brand new and true...
Just bought 2 Diablo blades yesterday .... made in Italy ... not Switzerland
SKILSAW blades and some Bosch.... guy. Never said Diablo.
Yeah he did. Listen at 32:10 forward...
Bought the Kobalt corded saw because of this video! I used it to build a privacy fence! Great saw, great price, thanks!
I really like his reviews also. He has jazz hands! All the best Nick!
🙌🙌🙌😂👍
@@VCGConstruction you guys the best. I love your videos. As soon as my divorce is finalized I'm going to sign up for your patreon.
Hey Nick has some class! He’s directing a symphony orchestra with his hands 👍🏻
Thank you for this. I'm in the market for a circular saw. My ragged out 12 amp B&D has a date with destiny--and the Grim Reaper
I'm ready for y'all to test the KOBALT XTR
Just bought the 3 pack and excited to blow more money lol
@@mryork_ I just tried to get the 5 pack today but they're out of stock everywhere. Idk if I should wait or just get the 3 for now.
Why can't I stop watching even though I've already made my decision on which saw to go with?!
Awesome video love the huge energy 😁😂😂 can we get a video in the future with a list of 6 1/2"/165mm circular saws?
I grew up calling any circular saw a skilsaw... so technically my dewalts and milwaukees are skilsaws
Same here, we call em skill saw.
Yes sir! They were all skilsaws growing up!
Same.
I love the excitement 😂. Can we get a video on different brands of saw blades? I’m a Diablo guy, but I guess not everyone feels the same.
I would like to know the differences and what they all bring to the table
OMG I replayed this 3 times. This guy needs a pay raise! So entertaining and informational.
I second that! This dude needs his own skit on SNL! He's wasting his god given talent in the construction industry! LOL
That new Kobalt XTR looks mean. You guys are so lucky getting a hold of them so soon.
My first VCG video and hooked. Entertaining and informative.
I've moved to Taiwan so need to purchase new hardware, over here is 120V and as I'm from the UK, it's 240 over there.
Any reviews on jigsaws?
Again, great video and well worth watching.
yo i gotta give it to ya this video was epic and the zoom in on him when he is losing his mind was priceless
I got a Cordless Ryobi and it works and cuts great...The Mean Green Machine...🤙
Vince walking in the background like a boss
🤣🤣👍🏻
I love my DeWalt and Hitachi circ saws. Good video Nick. You had me laughing + good reviews on these saws!
Thx for the list! Happy Saturday 😊☀️
I want y’all’s opinion, I’m about to buy a Milwaukee fuel 7 1/4” circ saw. Is the rear handle or the sidewinder more ergonomic and easy to cut with?
Update: I bought a Milwaukee fuel rear handle circ-saw. I’ve always used a sidewinder and I love the rear handle. The upside of the rear handle really shows on long rip cuts, it’s way easier to keep a straight cut for me.
Wow! Great job on this one. Great energy. I got into this channel because of Vince and his reviews. Entertained and educated by Nick... My gf even checked out the video.
Great choice for number 1. I use a skilsaw worm drive every day building fence. Had mine for years, it's taken a beating and it's still performing better than the brand new harbor freight junk that the new guys bring in. Definitely a must-have for anyone who's serious about their craft👍💯
I like makita corded circular saw working accurate and efficient. Show that next. 👍
Only saw I'll use... But then again, I haven't tried that new skil... Always thought the skil was a low budget saw
Informative video! I am on a budget and looking for my first saw. I am interested in the corded Ryobi circular saw. I noticed on the Home Depot website, that they have 13 Amp, 14 Amp, & 15 Amp versions. Other than their 1 Amp differences and pricing, should I just get the cheapest one (13 Amps)? What's the noticeable difference from 13 to 14 Amps, or 14 to15 Amps? thx
very informative, and very entertaining this guy is cool, keep them videos coming...
Have a Skilsaw mag77 and by far it’s the best saw I’ve ever used. I absolutely love the thing
That kobalt xtr saw looks slick as hell. Blue/black/yellow....Batman in a saw
I have all the 18v brushless metabo cordless tools and love them...hope to get the 36v stuff in near future!
The Ridgid and tea people thing was accurate. 😂😂 all the boys at work who use Ridgid also drink a lot of sweat tea
OTAAAY I watched the whole video and I am blown away - want to purchase a circular saw as a gift to my husband as we just purchased land - so many great choices I’m going check the #1 choice on your top list Skill Saw - he WILL be surprised and to think I was going to buy WORX you didn’t even mention it 😂 THANK YOU THIS WAS FUN TO WATCH
Skil saw mag 77 he'll love you forever 😄👍
@@VCGConstruction
Aaah ok thanks 2021 gonna start with a smile 😃
I like how vince just appears randomly lol i would have been funny if he walked by with a slice a pizza in his hand or something
I have to say I couldn't wait and skipped to the end to see which was deemed the best circular saw on the market in Expert Class and was so happy to see we agree because I just bought the new worm drive cordless 71/4" Skil. I have been out of the carpenter trade for well over a decade and am sorry to hear some say the brand declined a bit for awhile but I never saw any other circular saw used in the Carpenters Union and I was in for nearly ten years 👍
15:36 this must have been made before the TTR with the recip saw
midnightwolf this video is just for circular saws though. I mean I can’t say I’ve noticed any difference in placement from their other ranking videos, but that’s doesn’t mean there won’t be.
Wow Nick great vid,very funny and informative...u the man!!
Thank you Alan! You da man really
From an Aussie, down here we have the 3 big brands on site. Dewalt, Milwaukee and Makita. They are the 3 main ones down here. Makita is the cheaper of the bunch so a lot of apprentices start with it. Our cheap once use brand is ozito so if you look them up you can see our 'worse' and they aren't that bad, probly same level as ryobi one
Battery powered and brushless?
Well, I use that 36volt Makita saw...It has a magnesium base, rafter hook, Yes its heavy, but I've also used the Milwaukee Saw too and it's no lighter. With all the same features. The single battery shown was the 12 amp hour battery that is just as heavy as 2 Makita batteries. I've also used the Dewalt saw with the Flexvolt battery. Great saw but not any better than the Makita or Milwaukee. Also you might talk about the prices of these options. That 12.0 High output battery Milwaukee makes is over 250 bucks. 2) pack Makita 6 amp batteries cost 180. So these 3 saws are equal in every way in my opinion. I am not a fan of Metabo at all. My business partner bought some new tools from Metabo, he sold them after a week. Went back to his Ridged. Hilti tools are great tools, but if you can afford them, you don't need to work for a living. I've never used the Skill Saw battery saw. I have an old worm drive Skill Saw that you have to put oil in and change it sometimes. It is a beast!!! I bring it out to rip hardwoods and yellow pine posts and beams. I totally agree with that old saw being the best ever made!
Vince is the man love the seriousness great vid nick.
Thank you lucas!
Have you done a comparison that includes the DeWalt DCS577 with either of your "expert" saws?
"Screaming at your smartwatches........." ahahahahahaha I like this guy! And he has a straight man!!
Great information man. Definitely will helps narrow down my choices.
Glad I could help
"Don't be biased"?! We call came here to inform a bias. I want to know what's good and then be biased towards good. Having said that, I've tried Ryobi tools many, many times and they have always disappointed me.
I don’t see battery powered skillsaw worm drive on the website. Where’d you find that?
Dog, how have I not known about you till now. TH-cam needs recommend this to me more!
My name's Kevin Hernandez too 😂
@@KevinHernandez-zk4gb my name is...also...Kevin Hernandez...
Your videos are ALWAYS informative! Keep it up brother!
This guy is hilarious, I love every bit of it. Never believed I could watch it till the end...but I did.
This is Cartman if he grew up to be a contractor
I have a Bosch CS model and I love it . Cuts like a Cadillac! Great review! Just subbed
Thank you for the awesome feedback and support Brandon!!
I have a black&decker one and it's old and it still cuts great to this day I only used it about 5 times tho
It's probably good because it's so old.
I just found your channel while drinking coffee with a touch of swiss miss in it. What tool do you recommend 🤔? Love the video!
Is this Nick's audition video for a WWE announcer, Lol, the hand flailing is incredible, he looks like an orchestra conductor of the beautiful sounds of the circular saws, show them the tool passion Nick!! Lol👍👍
😂😂😂👍
Love your personality, watched to know which saw to buy hubby for birthday. Best saw for $200.00??
Best thing that you can get hubby for birthday is a new gf
Vince is the boss but I gotta say Nick hurt my ribs I could not help but laugh at his presentation, I learned a lot.
I just got the Milwaukee 6 1/2" fuel .....should I have bought the 7 1/4"? Just ripping through 2x4s mainly for home builds/projects
Dude, I just got back from the store 35 mins ago with my 7 1/4 milwaukee m18 and boy oh boy... pretty bad ass .. just saying
I haven't used the one you have yet tho 😕