How to Remove Rear Window Regulator 11-16 Ford F250
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2019
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/16/cF/window-regulator
In the video, 1A Auto shows how to remove and replace a stuck, slow or grinding rear window regulator. The video is applicable to the 11, 12, 13, 14, 15, 16, Ford F-250
This process should be similar on the following vehicles:
2011 Ford F250 Super Duty Truck
2012 Ford F250 Super Duty Truck
2013 Ford F250 Super Duty Truck
2014 Ford F250 Super Duty Truck
2015 Ford F250 Super Duty Truck
2016 Ford F250 Super Duty Truck
🔧 List of tools used:
• 10mm Socket 1aau.to/ojA/1AXAA00017
• 7mm Socket 1aau.to/ojA/1AXAA00017
• Trim Tool Set 1aau.to/odG/1AXXX00006
• Ratchet 1aau.to/onr/1AXAA00016
• Socket Extensions 1aau.to/omn/1AXAA00015
• Painter's Tape
Subscribe: / @1aauto
Check out our playlist:
Ford F250 Super Duty 2011-16 3rd Generation: • Ford F250 Super Duty 2...
For More Info visit us at 1aau.to/h/bFx/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Great video done in 20 minutes.
Great video, I have a 2011 f350 and the window actuator in the video is not the same in link.
What I thought was going to be a daunting task, you made very simple. Thank you sir!!!
Super helpful. Step by step directions with perfect video. Thank you.
Thank you so much for the assist! You saved me $$$
Awesome directions...thank you very much! Finished it in less than an hour.
+Chainweight Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Excellent video!!! Thank you
Great video, great detail.
Excellent, thank you.
This helped a lot thanks!
+Gil Shackelford Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thank you!
What if your window will not go down then what do I do to remove the bolts that hold the window.
You can hold the window and then clip the cables that run it up and down. Then when you get it into position, put a small set of vice grips on the track to hold the window in place. My window was down and I had to cup the cables and raise it up and Vice grip it up while my parts came in. Once my parts came in I released the Vice grips and put the window in the same location he did and took it off the track then taped it up. You may can lift it up or down without cutting it, I don’t know.
Thanks!!
+J Essary Farms Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Is f350 different? My rear regulator looks nothing like that
How come you don't have any videos on replacing the power sliding rear window or regulator?
+Christopher Reade We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
What if the lock won’t unlock after you change it?
Finished in 15 minutes even with holding the window up by myself (tape kept coming undone)
The link to the part goes to a hand crank replacement 😂
Exactly what I was looking for TY
Remember, when ordering this part there is a right and left. Silly me…. Done in 45 minutes….