Thank you for the video. Your method for cutting the hole in the hull works with thin hulls but not as well on thicker laminates. For those you are better off with a router on a shaft similar to your marking tool. I recently installed a tunnel in an old sailboat with a 25 mm hull thickness using the router method and it worked flawlessly. No grinding is required and the tunnel fits perfectly the first time. I credit ‘She’s the Captain’, a Danish TH-cam channel with the idea. He has done two tunnels, the first one very similar to the boat you are working on in your video and this is the one where he uses a router.
Das erste gute Video das ich über den Einbau eines Tunnels im Netzwerk gefunden habe. Viele Dank für eure Mühe. Beste Grüße. K.W.
Thank you for the video. Your method for cutting the hole in the hull works with thin hulls but not as well on thicker laminates. For those you are better off with a router on a shaft similar to your marking tool. I recently installed a tunnel in an old sailboat with a 25 mm hull thickness using the router method and it worked flawlessly. No grinding is required and the tunnel fits perfectly the first time. I credit ‘She’s the Captain’, a Danish TH-cam channel with the idea. He has done two tunnels, the first one very similar to the boat you are working on in your video and this is the one where he uses a router.
gutes video- jetzt traue ich mir das bei meinem segelboot auch zu
Perfekte Arbeit
Sehr schön dargestellt.
Selten ein so befriedigendes Video gesehen.
Sauber gearbeitet.👍
Gute arbeit. Wenn man kein Antifouling drauf will wie würde dann der letzte Schritt aussehen?
Klasse Sache. Wie weit unterhalb der Wasserlinie muss das Loch gebohrt werden?
Ideal wären so ca. 25 cm
LG
Welches Harz wurde denn zum laminieren verwendet, Epoxi oder Polyester?