Cromax recommends the wet bed first, that way all blend edges do not land dry onto the OEM clear with low adhesion. I have found that the 222S from Cromax will map featheredges in primer, so I keep it off primer edges, but apply it before any base is sprayed. All coats of base then have a wet bed to land on.
Turned out great as always! I love that you said ‘don’t think shops are perfect’. People really get upset when it’s not a perfect paint job. Painters who care do their best and I wish they could appreciate the effort. Peace Gabe ✌️
Great finish as always Gabe I love watching you spray as you look so relaxed an chilled out, I wish I could get my finishes as clean as you do mate, I've tried tacking with a microfibre but it didn't seem any better than a tack cloth so still getting lots of nibs! 😭🤔😂👍
Yeah we saw the spots but if I had that many in my off the gun finish I would be very happy, I'm talking about 3 or 4 times as many in most of my finishes 😲😂
I don’t think I’ve seen u move that slow clearing.. u smashed that clear on!!! I would be having to cut the tape off if cleared like that lol. That Motivated painters edition Walcom is a beast!! Awesome video. Only think missing was how NICE NICE NICE it came out!
Enjoy your Channel, just one thing that bugs me considering you dial in to a high standard of prep and paint and cleanliness.I have trained many painters and the one thing that I always stress is don't go to all the time and trouble of cleaning and blowing off the panels and then before you go to paint test the gun , pulling the trigger pointing towards the floor.Even the slightest bit of dust will kick up, even though the floors the extract.Why chance it, especially as you are so meticulous in all other areas. I have been in the body repair trade for 43 years and overall you do a great job, keep up the good work on the channel.
@@MOTIVATEDPAINTERS sounds exciting. Will look forward to it. Keep up the awesome content. Would be awesome if you could do a series on some of the prep of your jobs. As it’s such a massive part of spraying. Nice nice nice!
Awesome 👏 Gabe you smash that clear on spot on the money bullseye 🎯 I like how you make that blend so small and nice 👍 lol 😂 keep it up much love and respect ✊ to you Gabe all the best 👍👍👍👍👍👍👍👍👍👍✊✊✊✊✊✊👏👏👏👏👏👌👌👌👌👌👌👌👌👊👊👊👊👊👊👊👊👊🙏🙏🙏🙏🙏🙏🙏🙏🎯🎯🎯🎯🎯🎯🎯🎯💯💯💯💯💯💯💯💯💯
So I could see going thru all that if the damage was in the front or rear of the hood but where is at I'd probably go ahead an panel paint it, if the color is close enough for one fender it's good enough for both. Just my 2 cents God bless ya.
@@MOTIVATEDPAINTERS hey Gabriel, enjoy your videos, nice to see a Tradesman take pride in his work. With respect to colour fading or blending, I will back blend the adjacent panel to ensure colour, metallic and or Pearl consistency in the coloured area irrespective of colour accuracy. It keeps me out of trouble. Cheers and Happy Spraying.
Cromax recommends the wet bed first, that way all blend edges do not land dry onto the OEM clear with low adhesion. I have found that the 222S from Cromax will map featheredges in primer, so I keep it off primer edges, but apply it before any base is sprayed. All coats of base then have a wet bed to land on.
Hey brother do a video showing how you polish big dirt nibs
Good to see you back in action
Much love!!
Well done, great method looks very good!💯
Turned out great as always! I love that you said ‘don’t think shops are perfect’. People really get upset when it’s not a perfect paint job. Painters who care do their best and I wish they could appreciate the effort. Peace Gabe ✌️
Much love ! Thank you!
Gail force winds? Peace ✌️👽
I hope someday...have your experience for shoot the paint and clear like you.
Much love!
Wish you were closer man! Would love to do a video with you!
Much love!
Great finish as always Gabe I love watching you spray as you look so relaxed an chilled out, I wish I could get my finishes as clean as you do mate, I've tried tacking with a microfibre but it didn't seem any better than a tack cloth so still getting lots of nibs! 😭🤔😂👍
Same here!! It has gotten better for me but still not as clean as some of Gabe’s jobs.
You guys saw all the polishing spots at the end I still need to polish ! Haha
Yeah we saw the spots but if I had that many in my off the gun finish I would be very happy, I'm talking about 3 or 4 times as many in most of my finishes 😲😂
Good content
Hey again Gabriel 👍
Hey again Gabriel 👍 In my opinion you're an expert and cool guy ... Take Care bro...
Thanks man!!!
I don’t think I’ve seen u move that slow clearing.. u smashed that clear on!!! I would be having to cut the tape off if cleared like that lol. That Motivated painters edition Walcom is a beast!! Awesome video. Only think missing was how NICE NICE NICE it came out!
Hahahaha I loooovveee ittttt
Enjoy your Channel, just one thing that bugs me considering you dial in to a high standard of prep and paint and cleanliness.I have trained many painters and the one thing that I always stress is don't go to all the time and trouble of cleaning and blowing off the panels
and then before you go to paint test the gun , pulling the trigger pointing towards the floor.Even the slightest bit of dust will kick up, even
though the floors the extract.Why chance it, especially as you are so meticulous in all other areas.
I have been in the body repair trade for 43 years and overall you do a great job, keep up the good work on the channel.
Much love thanks for the kind words! We all slip up
I see you switched paint line nice
Still using ppg envirobase
@@MOTIVATEDPAINTERS 🤭..
Clean job brotha 👌🏽
When will you have restock on the suits?
Second this! I need a new medium!!!
Dang guys thanks for the love! I am working hard to get more! Some changes coming ! Good ones! I will announce it when I have more details!
@@MOTIVATEDPAINTERS I like the sounds of this. I’m just antsy to pull the trigger (no pun intended) as soon as that Slim Kombat restock drops 😎
@@MOTIVATEDPAINTERS sounds exciting. Will look forward to it. Keep up the awesome content. Would be awesome if you could do a series on some of the prep of your jobs. As it’s such a massive part of spraying. Nice nice nice!
Haha awesome! Coming soon!
Still looking for those spray guns my friend!!!
Coming hopefully next week! I'll post a video !
Ok, thanks man!!!
Awesome 👏 Gabe you smash that clear on spot on the money bullseye 🎯 I like how you make that blend so small and nice 👍 lol 😂 keep it up much love and respect ✊ to you Gabe all the best 👍👍👍👍👍👍👍👍👍👍✊✊✊✊✊✊👏👏👏👏👏👌👌👌👌👌👌👌👌👊👊👊👊👊👊👊👊👊🙏🙏🙏🙏🙏🙏🙏🙏🎯🎯🎯🎯🎯🎯🎯🎯💯💯💯💯💯💯💯💯💯
Much love!!
Niiiiicee.... 👍🏻
Much love!
Do you really go that fast ? So as soon as you blow it dry you clear?
So I could see going thru all that if the damage was in the front or rear of the hood but where is at I'd probably go ahead an panel paint it, if the color is close enough for one fender it's good enough for both. Just my 2 cents God bless ya.
Fair enough yup
Do you not get splash back or any reaction when applying base directly over a wet bed of blender ? I do but I’m not using ppg I’m using spies water
Nope I haven't noticed with envirobase
Great vid! Is your compressed air heatet? I’m just wondering why the base is drying so fast..
Nope it's just the blower makes a huge difference and good booth airflow
What is your go to Gun for Envirobase Base cost Gabriel ?
Hands down!
motivatedpainters.myshopify.com/cart/31309043236922:1?channel=buy_button
hey i want to buy a suit but it says sold out in size L how do i get one? good job
I am sold out for a while sorry 😭
@@MOTIVATEDPAINTERS you will not have more, soon
Bro when using a r p sata whts the psi yo to use
28psi
What gun are you using for the clear coat?
Hte clear 1.2 carbonio
Do you leave you’re 490 wet bed in your gun for a couple days or do you clean it every use?
I have a dedicated 490 gun and clean it at the end of the week
All week hahaha
@@MOTIVATEDPAINTERS haha usually a day or two but sometimes I don't need it and forget about it 🤣 I also don't put 492 or 493
Do yal add 494?? Or leave it as is
@@derricktrevino9221 reduce 35-40%
Why wet bed after?
Helps blend in eliminate any sand piling
How do I get that blower from you?
motivatedpainters.myshopify.com/cart/7228763242554:1?channel=buy_button
what about pass fender color blend?
I think he said this alternate hits well enough.
Like I mentioned in the video and description this variant works like a charmmmm
@@MOTIVATEDPAINTERS hey Gabriel, enjoy your videos, nice to see a Tradesman take pride in his work. With respect to colour fading or blending, I will back blend the adjacent panel to ensure colour, metallic and or Pearl consistency in the coloured area irrespective of colour accuracy. It keeps me out of trouble. Cheers and Happy Spraying.
Much love !
@@MOTIVATEDPAINTERS thanks brother
Hey Gabe how do you set up the fan on your Walcom hte base
All the way open then pull the trigger and close it until it touches your flinger . 27 psi and 19 for control coat fan wide open
❤❤❤🔥🔥
👌💯
😍😍😍😍😍