Hi, l used to own a 1902?Hornsby Akroyd 4NHP Horizontal blow lamp start engine. It was very easy to start by turning the flywheel backwards against the compression it would then fire and run in the right direction at 120 rpm without any problems.
Are these old engines reliable enough that you could automate the fuel and lubrication system in order to run 24/7? Would made a great off grid power source if belted to a generator.
Maybe not one this old. A later hot bulb engine with automatic lubrication would be fine, that was what they were used for back in the day, running unattended for long periods. Start it up and it will run for as long as there is fuel and lubrication.
To make that currrrrr like a kitten is to thin the crude mix with some Hot Racing fuel high nitro to see how good the dude will run.😊😊😊😊😊🔥🔥🔥🔥🔥🔥😀😀😀😀😀😀🧨🧨🧨 And see the flam out the stack when it start's
Then they draped a long strap around a spindle and back around the flywheel, and that monotony was solved. Look up the old industrial machines. Preserve your back any way you can, take my word for it, especially now that 'continuity of government' has our pain pills. I know I feel better, that's why it's 0150 and I'm still awake. Good luck America.
Something not right with either the engine or the operator, given that once started he couldn't get it to idle happily without all that fiddling. Painful to watch such dysfunction.
Was I the only one rocking back and forth in my chair helping the guy ?
Yes, you are.
Caught myself doing the same thing lol.
Nein 😅
Have to admire designers of the past clever engineering at the time
"ja när kula är röd då far man"
gamla tändkulemotorer är bland det fränaste som finns👍👍💪💪
Hi, l used to own a 1902?Hornsby Akroyd 4NHP Horizontal blow lamp start engine. It was very easy to start by turning the flywheel backwards against the compression it would then fire and run in the right direction at 120 rpm without any problems.
Very cool old engine 👍
The sound is better than an e-mobile !
I love EVs and old engines.
Must be over 500cub inch motor or 8L plus.Love it.
So toll! Danke für drn Upload! ☺️🌞
There will work for ever ❤
Ich stelle mir vor, dass dieses Schmuckstück in einem Kutter werkeln könnte. 👍👍👍
Be careful not to get wrapped around the axle there, big fella!
That’s off the hook 🪝 amazing
Used to start my Fairbanks Morse 15 hp Style N gas engine by hand. Barely. Then we rigged up compressed air start.
very nice 😀
I'm positive that Wile E. Coyote acquired one of these from Acme Corporation...
nice to see, thanks for sharing, you can do it 👍👍
Are these old engines reliable enough that you could automate the fuel and lubrication system in order to run 24/7? Would made a great off grid power source if belted to a generator.
Looks like it needs lots of attention.
Inefficient...would also need dismantling and cleaning often
Maybe not one this old. A later hot bulb engine with automatic lubrication would be fine, that was what they were used for back in the day, running unattended for long periods. Start it up and it will run for as long as there is fuel and lubrication.
Is that a Fairbanks Morse? It sounds like one...
No, the manufacturer is an old Swedish company named Seffle.
Semangat..💪..ikut hadir nyimak belajar mas Bro..👍
Howdy.
The origin of Star Trek Warp Drive ...
Regards.
I hope I am lucky enough to find me and engine just like this sweet machine. What is the brand and is it a ship engine Sir ??? Thanks
Does not look like ship engine
What type of engine does it look like fella ??@@mikkohelenius
@@victoryfirst2878 It's a saw mill engine 👍😊
Very nice unit Sir. Hope I can find me one soon. @@HotBulbEngines
It seems difficult to get the idle to adjust correctly
What..no computer control or ecm
Well, yeah. They wanted the engine to run
@@HairIsaBird lol I'll take cams and gears over computer controlled machinery any day👍👍👍👍👍
reminded me of the film Flight of the Phoenix.
Burns crude oil, that's so cool
this machine name pls bro
Are these 2 or 4 stroke?
Two stroke 👌
is this a covered steam engine on the outside?
Its hard to keep hot bulb engines running on no load
No that's not a problem at all 🌡🔥👍
Nonsense.
stasjonær maskin? hvilket fabrikat? :D
Det är en Säffle, eller "Seffle" som var den gamla stavningen.
What does he do?
perkins p4 easier, would make a good mooring block !
I think Greta would be pissed at this video. Very cool to see old machines still operating.
Greta
How dare you!
......das begreift Greta nie und nimmer 😂😂😂
Ein hervorragender Motor.
Da kann man jeden Arbeitstakt zählen 👍👍👍
Have you done your morning exercise, love?
Yes dear, I've started it twice.
😄
Wow!!!
And 2000Nm torque?
Probably 😉💪
Porque não usa um motor de partida ?
nice
Ganz toll😊
Why won't it run on it's own.
There was a problem with a check valve.
Here is part 2 => th-cam.com/video/Qhg1pO5oXPs/w-d-xo.html
"After checking them and cleaning them carefully, the engine runs very good."
You showed the wrong video.
Here is after cleaning the check valves
th-cam.com/video/Qhg1pO5oXPs/w-d-xo.html
i Småland?
Dalarna 😉
и сколько там в нём лошадей?
Why is he constantly fiddling with it . Can you not start it up and let it run at a set speed ?
Het heet een gloeikopmotor, een lamp komt er niet aan te pas.
To make that currrrrr like a kitten is to thin the crude mix with some Hot Racing fuel high nitro to see how good the dude will run.😊😊😊😊😊🔥🔥🔥🔥🔥🔥😀😀😀😀😀😀🧨🧨🧨 And see the flam out the stack when it start's
For corn sakes, show close ups of the name plates!
Here you go www.tandkulemotorer.se/images/galleri/15311_1566910912047352700.jpg
Won't run unless you keep manually pumping fuel.....Humm, bad fuel pump?
And I'm certain the starting process would have went badly for him...
If it starts backwards you idle down and backfire it the other way
❤❤
Old but Ox heart
Look at the exhaust - u can see, whats wrong ^^
Depois que o veio quase morreu de fazer forca com este troco, E que isto foi pegar kkkkkk
Nice 👍
Erstmal die Pumpe auf Stand bringen und dann richtig abdichten und entlüften.Dann läuft das auch.
4.0 horse
She don't wanna stay running though.
True, problem with a check valve on the fuel inlet, later fixed. I have a video of it when fixed 🙂
Many engines don’t like running light. Load them up and they run just fine.
Then they draped a long strap around a spindle and back around the flywheel, and that monotony was solved. Look up the old industrial machines. Preserve your back any way you can, take my word for it, especially now that 'continuity of government' has our pain pills. I know I feel better, that's why it's 0150 and I'm still awake. Good luck America.
Настоящий конкретный чихадыр!!!
Something not right with either the engine or the operator, given that once started he couldn't get it to idle happily without all that fiddling. Painful to watch such dysfunction.
Its not a diesel engine
Hot bulb semi-diesel. Sort of like a low compression IDI with a prechamber that doubles as a glow plug.
Värdelöst skräp
He fuel human fuel pump.
Presta não
Gebruik het dan ook echt. Zo wordt het saai
Cantankerous old lady isn't she?
Onhandig ding
What is the use of thís engine?
It's an old saw mill engine from an island in the Stockholm archipelago.
Двухоактник при равнгп размере больше, мощность.
I'm positive that Wile E. Coyote acquired one of these from Acme Corporation...
On his jet pack, right???