Been carrying this knife for three years now and it is hands down the best folder I’ve ever had for my line of work. It is an absolute beast and it takes whatever you throw at it.
I'm a firefighter/paramedic, I've carried the auto adamas daily at work for the last two years, it's by far the best knife that I've ever had at work. The auto was a gift from a buddy of mine.
The full size Adamas was my first Benchmade. I’d been balking at the price of their knives for a long while. I was looking at a Zero Tolerance and it did not feel good in my hand at all. Could barely get it opened. The Adamas was on display but was unmarked. I asked to see it. Loved it and finally decided to jump into the Benchmade world. That was about 3 months ago. I now own 5 Benchmades. Some may say I have a problem but I don’t think so. I absolutely LOVE the Adamas. No doubt my favorite carry knife followed closely by my Turret. Thank you for an honest, genuine review. I always get a good vibe off your videos. The authenticity is very refreshing. Hope you all enjoyed my hometown, Lake Havasu!! If you end up through the San Antonio area on your ‘trek’ I’d love to shake your hand. Thanks for all you do! Be safe!
I’ve got both the black and desert tan versions. Love them both. Exceptional knives. Shane Seibert really nailed it with this design. Also have the fixed Adamas as well. Now I need the mini just because.
Yours is the best gear review channel on TH-cam. I just ordered a Benchmade Adamas. From the information provided in your channel, I am sure it will serve me well!
Really like the full size Adamas but above my budget. Fortunately the cold steel recon 1 really does the job for me in the large folding beast knife category. Even with my fixed knife selection, I don’t encounter any tasks that one of my folders can’t handle. Still variety matters!!!
Buy once cry once, the old saying goes. Ha ha!!! I balked heavily at Benchmade’s prices for a long time. Finally just went for it a few months back. I now own 5 and I absolutely love every single one of them.
Recon 1 is way better than that Adamas. Better grind lines, tri ad lock will not buckle under weight. Lighter, cheaper, cold steel is also pro 2nd vs Benchmades ambiguous stance
@@richw9205 yeah I get that, just spent $7500 on a MTB, but knives for me are a practical tool that if I can find one that works great for 1/3rd the price of say another…I’ll put that cash into something else. I could have spent twice as much for an MTB, this bike does the job. We all get to do as we please…..as long as the wife says go ahead….HAHA.
@@4runner1grfe Always liked that Recon 1 but never got one because I HATE the fact that Cold Steel refuses to employ Americans and makes all there stuff in Asia, usually Taiwan, or China who is our absolute enemy. I've always liked the Adamas 275 but never got one. One knife I have carried for over a decade now and rarely here mentioned or reviewed is the equally beefy Gerber 06 manual (or auto) which is Made in the USA with S30V. That thick sharp pommel strike/skull crusher is the main selling point on that beast.
My Decade-Long EDC is the Zero Tolerance ZT0561 w/ an ELMAX Blade & a Flipper Ballbearing Actuator that has NEVER Slowed/Failed me in all these years! The Titanium back handle’s lock-up is built (& Thick!!!) like a TANK. Only 1 drawback is that ELMAX is HARD to Sharpen, yet once done, it HOLDS THAT EDGE For a LONG TIME…🇺🇸
I got my Adamas (D2) a few years ago after trial and error with folding knives for outdoor use. The 275 Adamas (and the Manix 2 G10 for a slicy alternative) are now my go to's. My family spends a fair amount of time at a family member's seasonal trailer site. While i still bring a belt knife and larger tools, the Adamas is a very capable, low profile folding camp knife. Works very well for the glamping environment I find myself in. Holds up to more than that of course. A little thick behind the edge, but very confidence inspiring.
I've always thought the full size Adamas was the most hardcore folder on the market . Benchmade will always be one of my favorites and I'm not fan boy . I just enjoy the reliability I've had with benchmade
Old video, but I just wanna say I’ve had mine about a year now and haven’t been easy on it. Absolutely the best knife I have ever owned. Bought it because of you!
Happy Birthday Aaron. Really happy for you that your wife gets it. ... Whenever I hanker for another knife, I always check your review first, before making the decision. ... I bought the full size Adamas (2) in CruWear quite a few months ago. It's now my end of the world folder. I don't carry it on my person everyday, but it is always along in a daypack or fanny pack if the situation requires. ... I keep coming back to one of my 5 Spyderco Mllitary knives for EDC. The Millie hits my sweet spot. Incidentally, the Military is out of stock nearly everywhere in the industry now. Bento Box has a couple of exclusives. ... In the New Year, I plan to gift a full size Adamas CruWear folder to an old friend in Alaska that I've known for 42 years. ... May God Bless, my friend
I got my first knife at 8 years old. Now 40 and have owned and used 100's of blades. I held the adamas in my hand with plans just to look at it. But instantly i knew it, bought it love it and carry it everyday. Full size. And i agree the versatility and durability of the adamas over way the price tag. Nice review and enjoy that sexy blade everyday
I remember what you said on a video awhile back in regards to Benchmade, "if you want the knife, buy the knife." It was something like that. Forget the politics of a Company. If they have a product you like, buy it! You not buying a $200 knife that you want to buy will not change the Company! You want it, get it. This knife is on my list to purchase next year. Later.
@@jeffreybloom5017 I’m curious too. I’ve owned Benchmade knives since the 90’s. But never watched Utube until the last year. I wasn’t aware of any issues. I would like to know. They are located in the Socialist minded part of the country.
@@jeffreybloom5017 About three years ago the Oregon City PD (where BM is based) asked Benchmade to help them dispose of some seized firearms (which can never be resold). Benchmade, in their infinite wisdom, posted about it on Facebook, probably to show how they support local law enforcement. It went at least as bad as you'd expect. People were calling BM anti-gun, calling for boycotts and throwing away their entire BM collections (which also forced a bunch of YT knife reviewers to boycott BM, lest they lose viewers). It all got a bit ridiculous to me-those guns needed to be destroyed anyway, and just because the police asked BM to do it that doesn't automatically makes them anti-gun.
Man your living the dream now. I been saying for years I'd love to live in an RV and travel the country but money is always the problem. Good thing you have this awesome channel to help out
Great Review. I am a Benchmade Fan boy and a retired federal LEO of over 45 years of service. To go against a company because it helped a local law enforcement agency do something the law enforcement agency was required to do by law is absolute B.S. Benchmade is NOT anti-gun. They are just a company, who at their own expense, helped their local community do something they couldn't do for themselves. If people want to be upset for the destruction of guns, then be upset with the local or state law makers that created a law REQUIRING the destruction, not a local company that was just being a responsible community member.
This was very well written. Thank you for that I was curious what happened there. Oh, Btw… enforcement of laws created by elected lawmakers, IS upholding the Constitution. See, The lawmakers put a thing called a “bill” forward…. Nevermind, (it’s in the constitution) 😂
Just bought one last night absolutely love the way it feels but your opinion about the blade swayed me because I’ve been dissatisfied with other blades and this is by far the sharpest blade I’ve ever had
This is one that I never thought I would go for, the way that I did! I was in one of my local gun & knife shops, specifically to check out the ZT 308(which I still want), they had the full size Adamas on display so I went ahead and put it in my hand, and 10 minutes later, I was leaving with it! It just did it for me! Everything about it, including that awesome Cruwear blade, with their new concrete looking coating, which holds up tremendously btw! Great looking knife, no doubt. I put a 18 degree bevel on it and then it performed to my liking. It’s my first time with Cruwear, and man, good stuff. If I had to list any cons, however, I wish they would have used T8 or T10 screws, all the way around, or at least for the stop pin. Heavy duty, overbuilt beast, but with the smallest screws for the entire chassis! That shouldn’t have happened. Otherwise, love it! Side note: the split arrow pocket clip, improves the ergos quite a bit, imo. 🤙🏼
I really appreciate this video. This video is one of the main vids that helped me decide to get my 275GY-1 ADAMAS. And I'm very glad I did. This knife is everything I was needing. Thanks!
Nice pick for a birthday gift! Congrats and happy birthday, Aaron! I hope you and Team GT celebrated you in style (as if the awesome knife wasn't enough). Enjoy the new Adamas!!! 🥳🎉🎂
I have to say mini works perfectly for me. As You said about large one: great grip, beefy blade and cruwear but in smaller package, however I am a bit compact :)
It’s nice to see the overbuild pocket knife actually put to use. I love my overbuilt folders, tough, capable and plain handsome. The Presidio II CF Elite is my big guy from BM and I quite enjoy it … for comparison it’s almost the same size as a Gerber StrongArm.
I’ve had the full size coyote tan/ black in d2 since they first released them in 2012. It has served me very well. It has excelled over any folder I’ve ever had tactically and woods wise. Other than being heavy I don’t have anything against it, but I will take durability over lightweight. I am in the woods and on the water year round. I have skinned many many hogs, deer, and used to cut lots of wood without any issues. Don’t underestimate the ability of that point to penetrate. The swedge ground tip and profile of it was designed to penetrate without damaging the point like most clip points will by rolling the point backwards or chipping.
Hahahahaha your certified in gear views hahaha!! No!!! you are a connoisseur of gear!! Great video brother! I'm living the RV life now too haha not perfect but I'm working on that! Also the knife and flashlight I use alllllllllll the time my eldris has gotten used sooooo much but I keep going back to my pocket knife.
I have this beast too. And I love how versatile it is. I actually opened my little league teams snacks after the baseball game tonight with this thing, and they thought I was John Rambo. This thing can ward off a Grizzly. Or open a Capri Sun. It’s a great knife. I’ve even change screws with it. Excellent steel.
ADAMAS yeah congratulation GT you won the lottery - this blade is an unstoppable machine. I use mine for everything it is my go-to knife/tool for all kinds of duties. It is NOT my EDC though - too big. However I have been looking at a CRTK Batum lately to get more pocket space but still have the tough blade. The only reason I haven't switched yet or "cooled of" the Adamas is the weaker steel on the CRKT Batum. You should review it some day.
A year ago I didn't wanna buy it because of the price... But eventually I did 😅...shame on me but I must say it's wonderful and sometimes you have to give yourself a 🎁. I did cost 325 euros here in the Netherlands 🇱🇺.... Crazy but what can I say.. love it. Ps: you have a amazing wife buying that as a gift! Wow
Got the old D2 version (Manuel) and I love it. Haven’t upgraded to the new version… yet… but the old one still serves me well. I also have the mini and it fits my hands almost perfectly and I find myself carrying it a lot but I understand it isn’t for everyone. For Benchmade the company… yea, wasn’t happy with them. I still bought Benchmade knives at that time because I love their product, not their politics. I wish I could only buy from companies that I agreed with every political move they make (if they make any) but as time goes on, it is harder to do so. Great review!!
I have a fixed blade adamas on cruwear that I use for camping . My EDC is the Osborne 940, this Friday I receive the mini Adamas on magnacut , I can’t wait to use it . I love the Adamas design and durability but I did have to buy G10 scales for the fixed blade .
I'm slowly going back to benchmade after the past couple of years they're some of the best blades I own I'm looking at a mini crooked river and the adamas great video
I agree the larger Adamas is the way to go over the (to my hand) too chunky mini version. I got the auto Adamas version a few months ago and really like it. It’s even more bulletproof than most of my ZT’s, and it feels better to me than the also overbuilt CS AD-10 and AD-15. Congrats on your new knife. 👍
Bought the mini first and love it and have no problems carrying it everyday. Then upgraded to the full-size and love it as well and have no problems carrying it everyday until I upgraded to a bigger phone so then went back to the mini to fit both phone and knife in the same pocket. they are both more knife than I need most days but I still love to carry it.
I love both of my ADAMAS knives I forked out the bucks this year and bought both the flipper and the automatic love them both and the CPM CRUWEAR blades are amazing I have ten Bench Made knives but these two are my favorite the blades are the same length as the buck 110 folder blades but the Adamas blades are much smother.
Happy Birthday Aaron. I almost always want pocket knives for my presents . I don't own any Benchmade knives but like some of the designs especially the adamas. Hope you had a great B Day. Keep up the great work . Thanks.
Rather than use the Alice clip, you can put your web belt through those places on the couch and then run that thing horizontal, so it's not sticking straight up and down and flopping around. I carry mine always on my belt, it also carries an M9 magazine perfect!
I have both the older d2 and the newer crowbar, I love them both. Most knives are to small for my hands and these knives fit great, and are a very sturdy folder
I either carry the Ad10 from Cold Steel or the AD 15. I also carry a 940 osborne in my 5 th pocket and a Leatherman Surge. I use the Surge the most. I actually don’t even need the other knives. I just like pulling the AD 10 or 15 when someone needs a knife to cut something
How does the D2 hold up? Is it pretty easy to hone and sharpen? I've only heard it's a chore to sharpen. I've been going old school and rocking a 3 dot Buck 110 in 440C and 4 dot Finger Groove with new drop point 420HC installed and they are so easy to sharpen. A couple passes on ceramic rod and back to razor sharp. I've never owned a D2 blade and always wanted the Adamas in D2. Maybe score one used eventually.
I own the S.O.G. Trident AT in D2 its a beast of a knife. I also own a Benchmade EDC knife which is awesome also...My COLD STEEL Voyager is getting long in the tooth but still sharp as a razor...
I cut up a bunch of styrofoam with my mini adamas for insulation around some window AC units a few months ago. The blade still slices right through paper.
I have the mini and I like it. The CruWear is pretty amazing stuff. It still doesn't replace fixed blades for me, but it's nice knowing it can build me a fire if I'm ever in a pinch.
Beefy knife is only as good as the lockup. I carry one of benchmades hunt series folders and after a season or two of use (including batoning) I started to get a lot of play in the blade. Benchmade took care of it under lifesharp. Ended up buying a good fixed blade for fire preparation and still carry my benchmade for everything else.
Awesome review, thank you! I've been considering this for several of the reasons mentioned, I need a really tough reliable hard core folder. And lol I love your wife's "super pumped look" 🤣
@@gideonstactical Cool, thank you! We just got some in at the shoppe where I work, and I'm getting one after watching your review of it. I do surveillance work and photography work under some pretty stressful conditions in some questionable and possibly very dangerous areas lately as I am documenting a story, and I need to appear plain and boring, like I have nothing of interest on me, while having a few very interesting and very trustworthy and reliable things on me if things go south.
First of all, Happy Birthday, Aaron! I'm not a big Adamas (or Benchmade in general) fan, but I completely get the rationale for it. Environment shapes needs and needs shape tool choices. Five years ago I thought the Cold Steel Rajah II was a pointless gimmick. Now, given my environment, I own and carry one often.
I clicked the comments in search of “what Benchmade stands for”. Going to search for more details on this. If I find out they’re not in support of my 2A, it will affect how I spend my money on my next knife purchase. In new to Benchmade and knives in general. Always carried one but never mattered what it was as long as it was useful.
Sold. And you saved me $70 on the auto. Got some good autos, some good, some overrated/& overpriced. And I like the black. 🤘🏻Appreciate your reviews. ✌🏻
I like the Hogue's a lot! I especially like the design of that Elishewitz EX-01 design with aluminum scales. The only big negative about it is that the steel liners are only half the handle length I noticed. I prefer full handle length and width steel liners on a folder if possible like the Adamas and Gerber 06. But then again I don't use a folder like I would a fixed blade. I did score a Benchmade full size Ritter Griptilian in M390 almost ten years ago for only $60! And Doug Ritter took this same design to Hogue with the RSK model.
Love my Hogues. Smoother, sharper, better! SiG Sauer K320 w Walnut inlays is sooo cool. Also really enjoy the wharncliff Deka. Saving up for more Hogues. My choice over Benchmade the wallet draining brand.
Beefy knife is only as good as the lockup. I carry one of benchmades hunt series folders and after a season or two of use (including batoning) I started to get a lot of play in the blade. Benchmade took care of it under lifesharp. Ended up buying a good fixed blade for fire preparation and still carry my benchmade for everything else.
Hey GT, Happy birthday mate.! As they say, behind every knife man there's a Great Lady.! You've got some great knives collection there & giving us an honest reviews. Rock On matey. Do have a great Christmas & safe New year to you & family including all them folks in that caravan park that you're staying. Greetings from Australia.
I haven't bought a benchmade in several years either, but I do like some of their designs. You mentioned their were 3 benchmades everyone should own. Which ones?
I do get what you're saying and I love my auto Adamas but my mini is a awesome edc that is a tank and I can trust. I have the griptilian and it is good but I prefer the mini. Its got cruewear!
Happy Birthday, great video as always. I do like the Adamas, understand the draw. I have an SR1 and a Presidio 2 so kind of looks like a mix of those. Anyway I am glad that you enjoy it. 😉
Had an Adamas from the first production run. It was a sweet knife for sure. Too big for EDC. I finally decided that for most anything I'd use it for, a fixed blade would be better.
I’ve been wanting an Adamas for a while now! Cpm-cruwear is one of my favorite steels. My go to large folder is my cold steel 4-max so it would be going up against it in terms of winning out for carry time. I’ve yet to find a folder that I prefer over the 4-max as of yet but the Adamas looks like a contender
I really think that more knife makers need to look into knives of this size. Cold steel is about the only company doing blades this size and bigger. I've had this Adamas on my list. Thanks for review.
im back watching adamas videos again lol. I had the mini but sold it cause I needed money and found i didn't carry it as much as i thought i would...but now i want one again but now i can't decide if i just want to try the full size. I can't get both... having a hard time deciding.. more videos here i come lol
Funnily enough I also got an OG Adamas for a birthday knife as a nice stealth pun. Since the word means indestructible aka diamond in 'ye old Greek which in turn is the birth stone of April all my folks had to engrave was the remainder of the date on its blade. The Adamas was the chonkiest handle for a folding knife in my collection until it was usurped by the Ontario XM-1, now those handles are ridiculous!
First real knife was a full size Adamas, I actually sold it to “help fund” lol my Shaman purchase. I’m hands down a bench made guy but man the Shaman was worth it!
I have thought about getting a shaman. I’ve Heard mixed things about the design and something about how it closes or an exposed blade or something like that?
@@gideonstactical Ok I believe I may know what you’ve heard of. One of two things, it is a compression lock so if your depressing the lock and the blade closes completely then the finger choil “guard” will hit your index so you can’t really flip it open and closed all Willy nilly while depressing the lock. Real quick learning curve, and I guess after years of sharpening or improper sharpening could also result in an exposed tip when closed. But anyway I loved them both and when it comes to ergos man the shaman takes the cake, plus you still get that big boy knife vibe with the big broad full flat grind so them kitchen tasks get a tad easier! Maybe just don’t baton with it! Hey keep up the good work and god bless you and your family! Safe travels!!!
I have some folder,says Benchmade on the side,massive handle and blade,liner lock, two types of blades one regular drop point,one tanto style. Bought both on a flea market 7 euro each. Didnt expect much,due to the price,just wanted to see the innards :-) Had to put some loctite in the screws because it got rattly rather quick but all in all I really like it, a serious blade in a folder size.
I love both my bushranger and Adamas blades. Back when my Adamas in D2 was one of my first high end blades I didn’t really want to carry much, but now that the collection has grown hi don’t mind bringing it to work and putting it through the abuse in my HVAC and plumbing career. Now I’m interested in that steel even though I have it in D2 lol. Look at what the knife addict world does to you haha
Agreed. I think my first blade was a Smith & Wesson Special Ops folder with "Surgical Stainless Steel!" What little I knew back then in 2004. Then I got a Leatherman K500 and K502 knife with 154CM and that set off the blade collecting! Then it was Benchamde's, Cold Steel's, Buck's, Ontario's, Kabar's, Reeve's, Gerber's, et al. Honestly, all of those "super duper" steel knives sit in a box collecting dust (well safety deposit box because they are worth 5-6 times what I paid for them). So now I mainly carry that old Leatherman K500/K502 for work everyday and a beefy Gerber 06 Manual in S30V or a vintage 1980-81 3 dot Buck 110 in 440C. I'm going back to the vintage steels and see no need for "super" steel blades anymore. I've always wanted that 275 Adamas when they first came out but never got one (got the Gerber 06 instead) and probably get a used one if I can find it.
The Adamas is a gorgeous knife. But the recon 1 is s35vn, and has great edge retention. Plus the s35vn is a stainless stainless steel. Plus, the recon 1 has a superior locking mechanism. And the recon 1 is around $125. There's no way I can buy the adamas without feeling like I've been ripped off.
Happy birthday Aaron! Cool knife too! I want a custom Benchmade full size Barrage but I’m having trouble pulling the trigger on it because of the price and there are things that I want to test. Sometimes you just have to get what you want though. People are gonna FLAME you for batoning it. I get all kinds of people calling me an idiot for batoning folders that are advertised as “hard use” knives
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
Been carrying this knife for three years now and it is hands down the best folder I’ve ever had for my line of work. It is an absolute beast and it takes whatever you throw at it.
I'm a firefighter/paramedic, I've carried the auto adamas daily at work for the last two years, it's by far the best knife that I've ever had at work. The auto was a gift from a buddy of mine.
The full size Adamas was my first Benchmade. I’d been balking at the price of their knives for a long while. I was looking at a Zero Tolerance and it did not feel good in my hand at all. Could barely get it opened. The Adamas was on display but was unmarked. I asked to see it. Loved it and finally decided to jump into the Benchmade world. That was about 3 months ago. I now own 5 Benchmades. Some may say I have a problem but I don’t think so. I absolutely LOVE the Adamas. No doubt my favorite carry knife followed closely by my Turret.
Thank you for an honest, genuine review. I always get a good vibe off your videos. The authenticity is very refreshing. Hope you all enjoyed my hometown, Lake Havasu!! If you end up through the San Antonio area on your ‘trek’ I’d love to shake your hand. Thanks for all you do! Be safe!
You picked a Great Knife! I love mine.
🤠👍🇺🇸👮🏻♂️⭐️. B9USA Sr.
nice to see a fellow turret lover!! i barely see anyone talking about that knife and it is also my 2nd favorite behind the adamas
You don't have a problem. I've owned actually hundreds of Benchmade knives over the last thirty years, no problem.
I’ve got both the black and desert tan versions. Love them both. Exceptional knives. Shane Seibert really nailed it with this design. Also have the fixed Adamas as well. Now I need the mini just because.
Shane Sibert's designs are always eye-catching too. It's a fantastic blade!
Excellent and thoughtful review.
Yours is the best gear review channel on TH-cam. I just ordered a Benchmade Adamas. From the information provided in your channel, I am sure it will serve me well!
Really like the full size Adamas but above my budget. Fortunately the cold steel recon 1 really does the job for me in the large folding beast knife category. Even with my fixed knife selection, I don’t encounter any tasks that one of my folders can’t handle. Still variety matters!!!
Buy once cry once, the old saying goes. Ha ha!!! I balked heavily at Benchmade’s prices for a long time. Finally just went for it a few months back. I now own 5 and I absolutely love every single one of them.
Recon 1 is way better than that Adamas.
Better grind lines, tri ad lock will not buckle under weight. Lighter, cheaper, cold steel is also pro 2nd vs Benchmades ambiguous stance
@@richw9205 yeah I get that, just spent $7500 on a MTB, but knives for me are a practical tool that if I can find one that works great for 1/3rd the price of say another…I’ll put that cash into something else. I could have spent twice as much for an MTB, this bike does the job. We all get to do as we please…..as long as the wife says go ahead….HAHA.
@@4runner1grfe Always liked that Recon 1 but never got one because I HATE the fact that Cold Steel refuses to employ Americans and makes all there stuff in Asia, usually Taiwan, or China who is our absolute enemy. I've always liked the Adamas 275 but never got one. One knife I have carried for over a decade now and rarely here mentioned or reviewed is the equally beefy Gerber 06 manual (or auto) which is Made in the USA with S30V. That thick sharp pommel strike/skull crusher is the main selling point on that beast.
My Decade-Long EDC is the Zero Tolerance ZT0561 w/ an ELMAX Blade & a Flipper Ballbearing Actuator that has NEVER Slowed/Failed me in all these years! The Titanium back handle’s lock-up is built (& Thick!!!) like a TANK. Only 1 drawback is that ELMAX is HARD to Sharpen, yet once done, it HOLDS THAT EDGE For a LONG TIME…🇺🇸
I got my Adamas (D2) a few years ago after trial and error with folding knives for outdoor use. The 275 Adamas (and the Manix 2 G10 for a slicy alternative) are now my go to's. My family spends a fair amount of time at a family member's seasonal trailer site. While i still bring a belt knife and larger tools, the Adamas is a very capable, low profile folding camp knife. Works very well for the glamping environment I find myself in.
Holds up to more than that of course. A little thick behind the edge, but very confidence inspiring.
Absolutely love the Manix. For such a seemingly delicate, slicey blade, it's still a hell of a hard use knife.
I've always thought the full size Adamas was the most hardcore folder on the market .
Benchmade will always be one of my favorites and I'm not fan boy . I just enjoy the reliability I've had with benchmade
Try an SMF one day you'll love it
@@PockeTanK Thanks . I'll for sure check them out .
Old video, but I just wanna say I’ve had mine about a year now and haven’t been easy on it. Absolutely the best knife I have ever owned. Bought it because of you!
Happy Birthday Aaron. Really happy for you that your wife gets it. ... Whenever I hanker for another knife, I always check your review first, before making the decision. ... I bought the full size Adamas (2) in CruWear quite a few months ago. It's now my end of the world folder. I don't carry it on my person everyday, but it is always along in a daypack or fanny pack if the situation requires. ... I keep coming back to one of my 5 Spyderco Mllitary knives for EDC. The Millie hits my sweet spot. Incidentally, the Military is out of stock nearly everywhere in the industry now. Bento Box has a couple of exclusives. ... In the New Year, I plan to gift a full size Adamas CruWear folder to an old friend in Alaska that I've known for 42 years. ... May God Bless, my friend
I got my first knife at 8 years old.
Now 40 and have owned and used 100's of blades. I held the adamas in my hand with plans just to look at it.
But instantly i knew it, bought it love it and carry it everyday.
Full size.
And i agree the versatility and durability of the adamas over way the price tag.
Nice review and enjoy that sexy blade everyday
Lol, I'm always running into paratroopers with a parachute all wrapped in themselves. So this would help with that 8 min mark lol 😆.
💯 % 🤣
I remember what you said on a video awhile back in regards to Benchmade, "if you want the knife, buy the knife." It was something like that. Forget the politics of a Company. If they have a product you like, buy it! You not buying a $200 knife that you want to buy will not change the Company! You want it, get it. This knife is on my list to purchase next year. Later.
What are the politics of Benchmade?
@@jeffreybloom5017 I’m curious too. I’ve owned Benchmade knives since the 90’s. But never watched Utube until the last year. I wasn’t aware of any issues. I would like to know. They are located in the Socialist minded part of the country.
@@jeffreybloom5017 About three years ago the Oregon City PD (where BM is based) asked Benchmade to help them dispose of some seized firearms (which can never be resold). Benchmade, in their infinite wisdom, posted about it on Facebook, probably to show how they support local law enforcement. It went at least as bad as you'd expect.
People were calling BM anti-gun, calling for boycotts and throwing away their entire BM collections (which also forced a bunch of YT knife reviewers to boycott BM, lest they lose viewers). It all got a bit ridiculous to me-those guns needed to be destroyed anyway, and just because the police asked BM to do it that doesn't automatically makes them anti-gun.
Man your living the dream now. I been saying for years I'd love to live in an RV and travel the country but money is always the problem. Good thing you have this awesome channel to help out
Yes it is an awesome blessing
I've always wanted an Adamas. I would carry it everyday in my jeans pocket, I don't care how large it carries!
Great Review. I am a Benchmade Fan boy and a retired federal LEO of over 45 years of service. To go against a company because it helped a local law enforcement agency do something the law enforcement agency was required to do by law is absolute B.S. Benchmade is NOT anti-gun. They are just a company, who at their own expense, helped their local community do something they couldn't do for themselves. If people want to be upset for the destruction of guns, then be upset with the local or state law makers that created a law REQUIRING the destruction, not a local company that was just being a responsible community member.
Totally agree.
Talking rationally. More of this needed for sure. Love me some Benchmade.
Well put! Thank you!
Do Leo's swear an oath to the constitution?
This was very well written. Thank you for that I was curious what happened there.
Oh, Btw… enforcement of laws created by elected lawmakers, IS upholding the Constitution. See, The lawmakers put a thing called a “bill” forward…. Nevermind, (it’s in the constitution) 😂
Just bought one last night absolutely love the way it feels but your opinion about the blade swayed me because I’ve been dissatisfied with other blades and this is by far the sharpest blade I’ve ever had
This is one that I never thought I would go for, the way that I did! I was in one of my local gun & knife shops, specifically to check out the ZT 308(which I still want), they had the full size Adamas on display so I went ahead and put it in my hand, and 10 minutes later, I was leaving with it! It just did it for me! Everything about it, including that awesome Cruwear blade, with their new concrete looking coating, which holds up tremendously btw! Great looking knife, no doubt. I put a 18 degree bevel on it and then it performed to my liking. It’s my first time with Cruwear, and man, good stuff. If I had to list any cons, however, I wish they would have used T8 or T10 screws, all the way around, or at least for the stop pin. Heavy duty, overbuilt beast, but with the smallest screws for the entire chassis! That shouldn’t have happened. Otherwise, love it! Side note: the split arrow pocket clip, improves the ergos quite a bit, imo. 🤙🏼
I really appreciate this video. This video is one of the main vids that helped me decide to get my 275GY-1 ADAMAS. And I'm very glad I did. This knife is everything I was needing. Thanks!
I love this knife , I took the clip off thus improving the ergos even more, then I carry it on my belt in a sheath.
I love my mini adamas. It's such an amazing knife and over built. You are not destroying it. I also carry a esse izula for a backup
Nice pick for a birthday gift! Congrats and happy birthday, Aaron! I hope you and Team GT celebrated you in style (as if the awesome knife wasn't enough). Enjoy the new Adamas!!! 🥳🎉🎂
The fixed Adames 375-1 is realy a great knife, especially with the custom handle scales from tpgrips 👍
I have to say mini works perfectly for me. As You said about large one: great grip, beefy blade and cruwear but in smaller package, however I am a bit compact :)
It’s nice to see the overbuild pocket knife actually put to use. I love my overbuilt folders, tough, capable and plain handsome. The Presidio II CF Elite is my big guy from BM and I quite enjoy it … for comparison it’s almost the same size as a Gerber StrongArm.
I’ve had the full size coyote tan/ black in d2 since they first released them in 2012. It has served me very well. It has excelled over any folder I’ve ever had tactically and woods wise. Other than being heavy I don’t have anything against it, but I will take durability over lightweight. I am in the woods and on the water year round. I have skinned many many hogs, deer, and used to cut lots of wood without any issues. Don’t underestimate the ability of that point to penetrate. The swedge ground tip and profile of it was designed to penetrate without damaging the point like most clip points will by rolling the point backwards or chipping.
Hahahahaha your certified in gear views hahaha!! No!!! you are a connoisseur of gear!! Great video brother! I'm living the RV life now too haha not perfect but I'm working on that! Also the knife and flashlight I use alllllllllll the time my eldris has gotten used sooooo much but I keep going back to my pocket knife.
I have the mini 273 Adamas and I love it it's solid as a rock. I'm looking for a good deal on the 275 Adamas after watching this.
I have this beast too. And I love how versatile it is. I actually opened my little league teams snacks after the baseball game tonight with this thing, and they thought I was John Rambo. This thing can ward off a Grizzly. Or open a Capri Sun.
It’s a great knife. I’ve even change screws with it. Excellent steel.
I love my Mini Adamas so much. For EDC it's overbuild but hey who cares? I am a Fan of folders under 20cm for all other tasks I use fixed blades.
ADAMAS yeah congratulation GT you won the lottery - this blade is an unstoppable machine. I use mine for everything it is my go-to knife/tool for all kinds of duties. It is NOT my EDC though - too big. However I have been looking at a CRTK Batum lately to get more pocket space but still have the tough blade. The only reason I haven't switched yet or "cooled of" the Adamas is the weaker steel on the CRKT Batum. You should review it some day.
A year ago I didn't wanna buy it because of the price... But eventually I did 😅...shame on me but I must say it's wonderful and sometimes you have to give yourself a 🎁. I did cost 325 euros here in the Netherlands 🇱🇺.... Crazy but what can I say.. love it.
Ps: you have a amazing wife buying that as a gift! Wow
Got the old D2 version (Manuel) and I love it. Haven’t upgraded to the new version… yet… but the old one still serves me well. I also have the mini and it fits my hands almost perfectly and I find myself carrying it a lot but I understand it isn’t for everyone. For Benchmade the company… yea, wasn’t happy with them. I still bought Benchmade knives at that time because I love their product, not their politics. I wish I could only buy from companies that I agreed with every political move they make (if they make any) but as time goes on, it is harder to do so. Great review!!
I have a fixed blade adamas on cruwear that I use for camping . My EDC is the Osborne 940, this Friday I receive the mini Adamas on magnacut , I can’t wait to use it . I love the Adamas design and durability but I did have to buy G10 scales for the fixed blade .
I saw your video. Then watched, read lots of hate for the knife. So, I bought the auto adamas for a detail I work on. Best handle ergonomics.
It’s an amazing knife. Congratulations on the new knife, and a belated happy birthday.
Oh yeah, "I need" either a big beefy folder or small fixed. Merry Christmas ☃️
This knife is a tank, one of the Benchmade classics. I’ll get one in the near future for sure. Cheers!
I'm slowly going back to benchmade after the past couple of years they're some of the best blades I own I'm looking at a mini crooked river and the adamas great video
I agree the larger Adamas is the way to go over the (to my hand) too chunky mini version. I got the auto Adamas version a few months ago and really like it. It’s even more bulletproof than most of my ZT’s, and it feels better to me than the also overbuilt CS AD-10 and AD-15. Congrats on your new knife. 👍
Best review of a product I've ever seen! Thank you sir!
Wow, thanks! Glad you enjoyed it
Bought the mini first and love it and have no problems carrying it everyday. Then upgraded to the full-size and love it as well and have no problems carrying it everyday until I upgraded to a bigger phone so then went back to the mini to fit both phone and knife in the same pocket. they are both more knife than I need most days but I still love to carry it.
Gearologist certification. I love it 😁
You know it worked my butt off for that one 😀😆
@@gideonstactical if anyone would have a degree in gear, it would be you 👍
I love both of my ADAMAS knives I forked out the bucks this year and bought both the flipper and the automatic love them both and the CPM CRUWEAR blades are amazing I have ten Bench Made knives but these two are my favorite the blades are the same length as the buck 110 folder blades but the Adamas blades are much smother.
Happy late birthday 🎂 🥳 🎉 🎈 🎁 🎊 hope had good one nice large folder looked at both size of that knife 🔪
Happy Birthday Aaron. I almost always want pocket knives for my presents . I don't own any Benchmade knives but like some of the designs especially the adamas. Hope you had a great B Day. Keep up the great work . Thanks.
Happy belated birthday Aaron. 🎂 Your wife knows a good gift that guys like.
Rather than use the Alice clip, you can put your web belt through those places on the couch and then run that thing horizontal, so it's not sticking straight up and down and flopping around. I carry mine always on my belt, it also carries an M9 magazine perfect!
Happy belated Birthday! One of these days I will get a Adamas. Great video.
I have both the older d2 and the newer crowbar, I love them both. Most knives are to small for my hands and these knives fit great, and are a very sturdy folder
I either carry the Ad10 from Cold Steel or the AD 15. I also carry a 940 osborne in my 5 th pocket and a Leatherman Surge. I use the Surge the most. I actually don’t even need the other knives. I just like pulling the AD 10 or 15 when someone needs a knife to cut something
I have the D2 version and is one of my fav knives I own.. The feel in my hand and the smooth buttery action is just sublime.. great choice..
How does the D2 hold up? Is it pretty easy to hone and sharpen? I've only heard it's a chore to sharpen. I've been going old school and rocking a 3 dot Buck 110 in 440C and 4 dot Finger Groove with new drop point 420HC installed and they are so easy to sharpen. A couple passes on ceramic rod and back to razor sharp. I've never owned a D2 blade and always wanted the Adamas in D2. Maybe score one used eventually.
Happy birthday dude. 🤙🏻
I own the S.O.G. Trident AT in D2 its a beast of a knife. I also own a Benchmade EDC knife which is awesome also...My COLD STEEL Voyager is getting long in the tooth but still sharp as a razor...
Reminds me of the Arvensis...I wish they would bring back by the way. Ohoo...Avensis II in Cru-wear!!!
I ❤️ my Adamas! Fixed blade monster 👊🏼 probably get the folder also🤙🏻
I already regularly carry the recon 1 as a backup camp knife. I think the Adamis is a worthy upgrade.
The recon is a solid build. There are so many good manufactures now.
I cut up a bunch of styrofoam with my mini adamas for insulation around some window AC units a few months ago. The blade still slices right through paper.
I love the Adamas, and have wanted one since release, the prices of Benchmade in the UK is abominable and puts it out of my reach.
People are gonna hate me for this but get yourself a fake from wish. They’re actually very very good. Delivered for 50 pound!
My wife let me buy the limited edition burgundy handle Benchmade mini Adamas for my 40th birthday. I LOVE this knife!
Awesome!!
I have the mini and I like it. The CruWear is pretty amazing stuff.
It still doesn't replace fixed blades for me, but it's nice knowing it can build me a fire if I'm ever in a pinch.
As always, thank you for the great video but if you were to compare this knife to the Off Grid Rapid Fire, it just can’t hold a candle to it.
Beefy knife is only as good as the lockup. I carry one of benchmades hunt series folders and after a season or two of use (including batoning) I started to get a lot of play in the blade. Benchmade took care of it under lifesharp. Ended up buying a good fixed blade for fire preparation and still carry my benchmade for everything else.
Awesome review, thank you! I've been considering this for several of the reasons mentioned, I need a really tough reliable hard core folder. And lol I love your wife's "super pumped look" 🤣
Hahah still love this blade a year later 👍
@@gideonstactical Cool, thank you! We just got some in at the shoppe where I work, and I'm getting one after watching your review of it. I do surveillance work and photography work under some pretty stressful conditions in some questionable and possibly very dangerous areas lately as I am documenting a story, and I need to appear plain and boring, like I have nothing of interest on me, while having a few very interesting and very trustworthy and reliable things on me if things go south.
@@gideonstactical Oh, and check your FB messages
First of all, Happy Birthday, Aaron! I'm not a big Adamas (or Benchmade in general) fan, but I completely get the rationale for it. Environment shapes needs and needs shape tool choices. Five years ago I thought the Cold Steel Rajah II was a pointless gimmick. Now, given my environment, I own and carry one often.
Sick!! Can you get my hands on some more cold steel in 2022
Sorry I meant I need to get my hands on more cold steel in 2022 :-)
Hogue knives needs the love Benchmade gets. Hogue has better quality control, USA made, arrive super sharp, and fully supports and respects the 2A.
They need to get more blades out there. Agreed they are good. Just not a lot on the market.
I clicked the comments in search of “what Benchmade stands for”. Going to search for more details on this. If I find out they’re not in support of my 2A, it will affect how I spend my money on my next knife purchase. In new to Benchmade and knives in general. Always carried one but never mattered what it was as long as it was useful.
Sold. And you saved me $70 on the auto. Got some good autos, some good, some overrated/& overpriced. And I like the black. 🤘🏻Appreciate your reviews. ✌🏻
I like the Hogue's a lot! I especially like the design of that Elishewitz EX-01 design with aluminum scales. The only big negative about it is that the steel liners are only half the handle length I noticed. I prefer full handle length and width steel liners on a folder if possible like the Adamas and Gerber 06. But then again I don't use a folder like I would a fixed blade. I did score a Benchmade full size Ritter Griptilian in M390 almost ten years ago for only $60! And Doug Ritter took this same design to Hogue with the RSK model.
Love my Hogues.
Smoother, sharper, better!
SiG Sauer K320 w Walnut inlays is sooo cool.
Also really enjoy the wharncliff Deka.
Saving up for more Hogues.
My choice over Benchmade the wallet draining brand.
Beefy knife is only as good as the lockup. I carry one of benchmades hunt series folders and after a season or two of use (including batoning) I started to get a lot of play in the blade. Benchmade took care of it under lifesharp. Ended up buying a good fixed blade for fire preparation and still carry my benchmade for everything else.
I just ordered the identical knife and I can hardly wait for it to get here
Bought this knife years ago. I love it. Still great today.
Hey GT, Happy birthday mate.! As they say, behind every knife man there's a Great Lady.! You've got some great knives collection there & giving us an honest reviews. Rock On matey. Do have a great Christmas & safe New year to you & family including all them folks in that caravan park that you're staying. Greetings from Australia.
very good knife, just not in my top 5 but will not trash it for any reason
Great video review and content
NICE vid & info. I wonder….how this stacks up against the Microtech Amphibian. Could you do a vid comparison? Debating which one to purchase.
Great suggestion!
I haven't bought a benchmade in several years either, but I do like some of their designs. You mentioned their were 3 benchmades everyone should own. Which ones?
Its going to be my Christmas present this year. I had the original version, always missed it, and after handling the new version, I had to have one.
I do get what you're saying and I love my auto Adamas but my mini is a awesome edc that is a tank and I can trust. I have the griptilian and it is good but I prefer the mini. Its got cruewear!
Happy Birthday, great video as always. I do like the Adamas, understand the draw. I have an SR1 and a Presidio 2 so kind of looks like a mix of those. Anyway I am glad that you enjoy it. 😉
Had an Adamas from the first production run. It was a sweet knife for sure. Too big for EDC. I finally decided that for most anything I'd use it for, a fixed blade would be better.
In outdoor use. Do u prefer the adamus or the Freek? If price and steel were equal.
Adamas
I'm disappointed they made the handle skinnier.. it may work well for you guys in your fancy skinny-jeans, but not so much for real hardworking men.
Can you do a VS’s video: Contigo vs Adamas
I’ve been wanting an Adamas for a while now! Cpm-cruwear is one of my favorite steels. My go to large folder is my cold steel 4-max so it would be going up against it in terms of winning out for carry time. I’ve yet to find a folder that I prefer over the 4-max as of yet but the Adamas looks like a contender
It's smaller then the 4 max the 4 max was my daily till I got my adamas
Great review! How does it compare to the CS SR1? Also... happy birthday!
I have the fixed blade Adamas, I want a Folding, I do wish the fixed blade had scales
What watch is that?? happy late bday dude
Casio Illuminators And G- shocks or what I usually wear. Plus every once a while I’ll do a pathfinder from 5.11.
I have an OG Adamas in D2, it definitely is a tank. I dont carry it very often, but she can do work!!
Benchmade Adamas is excellent gift 😎👍
I really think that more knife makers need to look into knives of this size. Cold steel is about the only company doing blades this size and bigger. I've had this Adamas on my list. Thanks for review.
Cold steel is done my friend, time to diversify
im back watching adamas videos again lol. I had the mini but sold it cause I needed money and found i didn't carry it as much as i thought i would...but now i want one again but now i can't decide if i just want to try the full size. I can't get both... having a hard time deciding.. more videos here i come lol
Funnily enough I also got an OG Adamas for a birthday knife as a nice stealth pun. Since the word means indestructible aka diamond in 'ye old Greek which in turn is the birth stone of April all my folks had to engrave was the remainder of the date on its blade. The Adamas was the chonkiest handle for a folding knife in my collection until it was usurped by the Ontario XM-1, now those handles are ridiculous!
First real knife was a full size Adamas, I actually sold it to “help fund” lol my Shaman purchase. I’m hands down a bench made guy but man the Shaman was worth it!
I have thought about getting a shaman. I’ve Heard mixed things about the design and something about how it closes or an exposed blade or something like that?
@@gideonstactical Ok I believe I may know what you’ve heard of. One of two things, it is a compression lock so if your depressing the lock and the blade closes completely then the finger choil “guard” will hit your index so you can’t really flip it open and closed all Willy nilly while depressing the lock. Real quick learning curve, and I guess after years of sharpening or improper sharpening could also result in an exposed tip when closed. But anyway I loved them both and when it comes to ergos man the shaman takes the cake, plus you still get that big boy knife vibe with the big broad full flat grind so them kitchen tasks get a tad easier! Maybe just don’t baton with it! Hey keep up the good work and god bless you and your family! Safe travels!!!
I have some folder,says Benchmade on the side,massive handle and blade,liner lock, two types of blades one regular drop point,one tanto style. Bought both on a flea market 7 euro each. Didnt expect much,due to the price,just wanted to see the innards :-) Had to put some loctite in the screws because it got rattly rather quick but all in all I really like it, a serious blade in a folder size.
I love both my bushranger and Adamas blades. Back when my Adamas in D2 was one of my first high end blades I didn’t really want to carry much, but now that the collection has grown hi don’t mind bringing it to work and putting it through the abuse in my HVAC and plumbing career. Now I’m interested in that steel even though I have it in D2 lol. Look at what the knife addict world does to you haha
Agreed. I think my first blade was a Smith & Wesson Special Ops folder with "Surgical Stainless Steel!" What little I knew back then in 2004. Then I got a Leatherman K500 and K502 knife with 154CM and that set off the blade collecting! Then it was Benchamde's, Cold Steel's, Buck's, Ontario's, Kabar's, Reeve's, Gerber's, et al. Honestly, all of those "super duper" steel knives sit in a box collecting dust (well safety deposit box because they are worth 5-6 times what I paid for them). So now I mainly carry that old Leatherman K500/K502 for work everyday and a beefy Gerber 06 Manual in S30V or a vintage 1980-81 3 dot Buck 110 in 440C. I'm going back to the vintage steels and see no need for "super" steel blades anymore. I've always wanted that 275 Adamas when they first came out but never got one (got the Gerber 06 instead) and probably get a used one if I can find it.
Lucky me got one older one with just D2 steel it's a tank of a knive.hard core use.i had a mini in my hands last week .
How is it compared to the original Adamas ???
You gotta check out the benchmade presidio 2 it’s awesome or the price
The Adamas is a gorgeous knife. But the recon 1 is s35vn, and has great edge retention. Plus the s35vn is a stainless stainless steel. Plus, the recon 1 has a superior locking mechanism. And the recon 1 is around $125. There's no way I can buy the adamas without feeling like I've been ripped off.
I like the Adamas. Not sure why people don’t like Benchmade, I never heard the controversy.
Happy birthday Aaron! Cool knife too! I want a custom Benchmade full size Barrage but I’m having trouble pulling the trigger on it because of the price and there are things that I want to test. Sometimes you just have to get what you want though. People are gonna FLAME you for batoning it. I get all kinds of people calling me an idiot for batoning folders that are advertised as “hard use” knives