I would love to have this backgammon board. I have been playing for over 40 years. I even played it in Greece while on holiday.. The men knew very little English and I knew very little Greek! I lost 95% of the time but I didnt care. I had such a great time. I sure felt bad the next day however, too much ouzo!
Not sure I would have put those tiny delicate screws in with a power tool - it looks like they spun in the holes - but great job and no way I could have done better. Thanks for posting.
I’m curious what type of glue you were using for the veneers? Seems like you could place it, put multiple veneers on, cut the veneers, peel it back, and then place the contrasting veneer on.
Hello again, sorry, I have to say that you are a master. I guess it comes from family. I have also another question: how long time the glue will hold? Isn’t a possibility the veneers cleave? Please respond.
Super Thanks and we need and wish 8K Photos or videos in Real Best 8K 60fps or 120fps HDR10+ resolution clarity quality and Sound in full HD 3D Stereo Surround , Soon Please.
@@MESVideo I am just asking myself, how he can remove pieces of veneer minutes after glueing them on and replace them. Everytime I have tried that, the glue needs to be warmed up again (iron or hot air).
@@s7r49 I made one myself, but I used clamps and assempled the whole veneer before glueing it. The result was fine but the working process is different.
@@s7r49 Yes, good luck. I made the experience, that fish glue is easier to use for this kind of job because it stayś liquid much longer than bone glue. Jointing the veneer pieces can easily be done by using a special kind of paper tape that has to be moistened with a sponge. Glues like hell.
I loved your build. I started recently woodworking as a hobby and want to try to make one based on your demonstration. Can I ask what woods you used and what this type of glue is?
İyi akşamlar, ilk önce elinize emeğinize sağlık çok güzel bir video hazırlamışsınız. Mesengerdan size tavla yapımı devam ediyormu nerede olduğunu sormuştum ama geri dönüş yapmadınız. Şimdiden ilginize teşekkürler
Amca çok süper olmuş ellerinize sağlık hobi olarak bende ahşap işleriyle uğraşıyorum babam tavla hastasın eğer mümkünse özelden kullanılan malzemeler ve ölçüleri verebilirmisiniz bende yapmayı düşünüyorum
I believe its hide glue. Comes in pellets that you mix in water. Once it absorbs all the water you heat it to 140 F. The ratio of glue to water I think might be job depended? I have only used it for glue chipping glass at 1 part glue to 2 parts water.
Сначала посмотрел ролик где парень ясень превратил в говно, назвал нардами и радовался результату. Затем Ваш ролик, где дерево, фанера и шпон преврашаются в конфетку. Браво. Пожелание начинающим. Дьявол в деталях! Не пренебрегайте аккуратностью и мелочами. Один саморез из нержавейки закрученый в латунную петлю может испортить впечатление. Всем добра.
Просто Огонь!!!
Работа со шпоном потрясающая!!! Благодарю за ролик.
What an amazing board, and true craftsman! I am at a loss for words.
Super!🤝
Простенько и со вкусом! Автору крепкого здоровья!
Amazing craftsmanship
That's some fine art and an exercise in patience. Thanks for sharing that.
Thank you! Cheers!
I would love to have this backgammon board. I have been playing for over 40 years. I even played it in Greece while on holiday.. The men knew very little English and I knew very little Greek! I lost 95% of the time but I didnt care. I had such a great time. I sure felt bad the next day however, too much ouzo!
Good luck!
ЗОЛОТЫЕ РУКИ, ПРОСТО БЛЕСК И ОЧЕНЬ КРАСИВО СУПЕР НА ВАШУ РАБОТУ.
Old version of a cnc machine, very refreshing to watch!
:)
من هم خودم یک تخته نرد ساختم ولی بازیش را بلد نیستم ولی از ساخته خودم خیلی لذت میبرم 👍👍👍
Батоно! Мои аплодисменты на всех языках географии! Настолько шикарно, что я не могу выразить эмоции! Браво! Гениально!
Beautiful, I will make my own board one day. Thank you so much for showing your Masterful Work.
Not one day, just do it
*замечательная работа. при просмотре вашего видео, возникли хорошие идеи.*
спасибо!
this vid contains so much more interesting stuff than a whole night of tv....beautifull craftmanship sir
Thank you very much!
Лучшее исполнение из того что я видел. Сразу видна рука профессионала.
Thank you!
@@MESVideo скажите пожалуйста свой адрес и номер телефона
@@MESVideo دو
@@MESVideo
Woooow so Nice!
Glad you like it!
Отличная работа ничего лишнего красивые нарды молодец дядька .
Спасибо
МАСТЕР. PROFESSIONAL.
Quel travail incroyable ! Tout est parfait. La précision est étonnante ! Bravo pour ce magnifique travail. J'adore jouer au Tavli. (Backgammon)
ما هذا الابداع يارجل . لقد صنعت تحفه فنيه جميله . احيك من العراق .
Thank You!
Sehr gute Arbeit.
Profesionel Meister und Qualität Arbeit ,verwendet hoch vertige Holz und fornir Material.
Meine Bewertung ist einfach Spitze.
БРАВО....МАСТЕР....
Отлично, респект профессионал,👍⭐⭐⭐⭐⭐
Really really great Job! Pure fascination!Thanks ans respect from Germany
Beautiful to watch a great craftsman at work.
Great hands and vision
Thank You!
That was beautiful.
Thank You!
WOW Wonderful well made. Greetings from Australia.
Thank you very much!
Beautiful work
Thank you very much!
Wow! Just...wow. Beautiful
Very beautiful, you should sell these on your Etsy shop!
Thank's
Amazing thanks for sharing
Thank You!
Great craftsmanship!! thanks for the video
Wow, I think that says it all.
Fantastic work. Maybe someday i'll get the patients to do that kind of work.
Great video.
Thank You!
Patients?
Very cool! As a new subscriber I demand that you find smaller dice for that backgammon board.
Great idea!
It's a blessing to watch him work. Two questions though: what's the glue? Why he didn't do the chess board on the double back side.
Chess is an afterthought to people who are obsessed with backgammon (speaking from personal experience).
interesting and appealing if ever I get enough room for a workshop
Very good, congratulations.
Thank's
Это искуство. Слов нет.
спасибо
لbravo good job
Very nice work, but the chessboard should be in the middle
Ok, thanks
Кросавчик.отлично поличилос👍👋👋👋👋👋
Not sure I would have put those tiny delicate screws in with a power tool - it looks like they spun in the holes - but great job and no way I could have done better. Thanks for posting.
Yes i seen that, it seemed to have a torque setting on the drill, not sure if it was set right. easy fix a few years down the road thou.
Beautiful to watch, Thank you
Que trabalho maravilho. Parabéns meu Senhor!
Eres un artista, todo mi respeto y admiración
Really nice work sir!
Share to see others too
Excellent well done.
how much does it coast?
Сразу видно человек вкладывает усилие в свои изделия ...
Very nice. Congratulations. Can you give information about the materials and thicknesses used?
Fantastic!
Many thanks!
Fabulous
I’m curious what type of glue you were using for the veneers? Seems like you could place it, put multiple veneers on, cut the veneers, peel it back, and then place the contrasting veneer on.
Great Work!!!! One wuestion… what kind of glue is this Brown thing?
Hello Master Artist❤. It was a beautiful work. The music was also great. What is the name of the album of this music?
Fantastic...love your work...where can I buy one? I do not need the checkers side...Looks like my grandfather one...Good memories👀❤️👍Thank you
Щикарно
лайк только за салам от деда на 1ой секунде
Hello again, sorry, I have to say that you are a master. I guess it comes from family. I have also another question: how long time the glue will hold? Isn’t a possibility the veneers cleave? Please respond.
Does he wrap the frame in veneer as well?
I saw a note that this maestro is not around. Is it true?
Can I buy one of his work? Can let me know how much it will cost?
Super Thanks and we need and wish 8K Photos or videos in Real Best 8K 60fps or 120fps HDR10+ resolution clarity quality and Sound in full HD 3D Stereo Surround , Soon Please.
Здравствуйте. Очень классно сделано. А можно у Вас приобрести такие нарды?
Can you use the triangle offcuts for another board?
Бомба!!!👍👍👍 Дизы поставили мега рукастые люди видимо))😂😂😂
Добрый день! Красивая работа! Приобрести у Вас можно? Заранее спасибо!
Skillful work, but long and laborious I imagine.
👍❤️
👌👌👏👍
ჯანი მოგცეს ღმერთმა დიდხანს პაპა!
very good work sir, ı want to ask you what kind of adhesive do you work,
Супер 👍👍👍
❤️❤️❤️
Круто.
Сколько стоят такие?
Great craftmanship. I would like to know what kind of glue he uses. It stays liquid even if it gets cold although it's applied hot. Fish glue??
it's Bone glue
@@MESVideo I am just asking myself, how he can remove pieces of veneer minutes after glueing them on and replace them. Everytime I have tried that, the glue needs to be warmed up again (iron or hot air).
@@s7r49 I made one myself, but I used clamps and assempled the whole veneer before glueing it. The result was fine but the working process is different.
@@s7r49 Yes, good luck. I made the experience, that fish glue is easier to use for this kind of job because it stayś liquid much longer than bone glue. Jointing the veneer pieces can easily be done by using a special kind of paper tape that has to be moistened with a sponge. Glues like hell.
Красиво, аккуратно. Что за клей, можно полюбопытствовать, на который шпон наклеян?
it's Bone Glue
Beautiful work! What glue are you using? Hyde glue?
Thank You! Yes it's Hyde glue
Amei este trabalho tao habilidoso e gostaria de saber se o sr. faz ra vendr e qual o préço deste lindo gamao
I loved your build. I started recently woodworking as a hobby and want to try to make one based on your demonstration. Can I ask what woods you used and what this type of glue is?
We do not know the name of the glue, This man died a few days ago :((
@@MESVideo that is sad to hear. My condolences to the family.
@@panikos Thank You!
Hide glue.
I am very sorry for the loss, but he enjoyed his work and the cigarette
dear sir! what kind of glue are you using? it looks great!
Looks like hide glue.
عالی بود💖💖👌👌👏👏
Что за материалы используете для украшений и разметки поля? Где берете и почем?
İyi akşamlar, ilk önce elinize emeğinize sağlık çok güzel bir video hazırlamışsınız. Mesengerdan size tavla yapımı devam ediyormu nerede olduğunu sormuştum ama geri dönüş yapmadınız. Şimdiden ilginize teşekkürler
Красиво.
Нарды, что надо. Годная работа.
👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Amca çok süper olmuş ellerinize sağlık hobi olarak bende ahşap işleriyle uğraşıyorum babam tavla hastasın eğer mümkünse özelden kullanılan malzemeler ve ölçüleri verebilirmisiniz bende yapmayı düşünüyorum
Ustad ölçüler size ulaştımı ulaştıysa bende alabilirmiiym
@@turgaydoganci3858 yok gelmedi usta
👍👍👍
Mestre, qual cola vc está usando? Grato
Ok, hide glue, bone glue
Congratulations very good tricks I have a question, how to prepare the glue you have by heating in a pot
I believe its hide glue. Comes in pellets that you mix in water. Once it absorbs all the water you heat it to 140 F. The ratio of glue to water I think might be job depended? I have only used it for glue chipping glass at 1 part glue to 2 parts water.
Hello John, thank you very much for your information, but what is the name of the glue
Lovely work. How thick are the veneers?
What kind of wood is it? Que tipo de madera uso por favor, y cómo se llaman o se co siguen esos stickers
Hallo, gute Zeit, welcher Kleber verwendet wird.
It's Hyde glue
@@MESVideo Vielen dank für Ihre Antwort
What type of glue is used?
bone glue
فنان🌹🌹
👍
Thank You!
With what glue do you stick ?
it's Bone glue
Parabens👏quais as medidas?
Yes it,s nice ,,, but tell me how you get the imprints of your finger prints off the piece you just flipped
Сначала посмотрел ролик где парень ясень превратил в говно, назвал нардами и радовался результату. Затем Ваш ролик, где дерево, фанера и шпон преврашаются в конфетку. Браво.
Пожелание начинающим. Дьявол в деталях! Не пренебрегайте аккуратностью и мелочами. Один саморез из нержавейки закрученый в латунную петлю может испортить впечатление. Всем добра.
Where can i purchase one and how much??
Очень хорошее видео как клей
называется. спасибо