Your N54/N55/S55 BMW NEEDS Water Methanol!! Snow Performance Direct Port Water Methanol Injection

Thank ya'll for watching! Don't forget to like, subscribe and comment!
How To Setup Direct Port Plate-
• Snow Performance N54/N...
Link-
www.nitrousexp...
Description-
Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for N54/N55 BMWs. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering unsurpassed reliability and ease of installation. The Stage 2 uses a progressive VC-50 controller(ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color(Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors.
Snow Performance Direct Port Injection Plates are the easiest, best-selling way to mount water-meth nozzles. Simply fit between the head and intake manifold and enjoy the placement of 6 Snow Performance Hyper-Sonic™ nozzles right where you need it! Our Direct Port Injection Plate is the easiest and best way to install water-methanol on your BMW N54/N55 Engine.
Website:
nitrousexpress.com or snowperformance.net
Check out our other social media
➥ Instagram: @nitrousexpress, @snow_performance
➥ Facebook: Nitrous Express, Snow Performance
➥ Merchandise: www.nitrousexp...
Find out more about us here:
www.nitrousexp...
#snowperformance
#watermethanol
#bmw

[@ColinLundholm-d7q]

I always wonder and can't find an answer if the pump will be sufficient to push 8 nozzles or if you need a bigger/better pump or some additional components to assist the pump

[@snowperformance1]

For 8 nozzles you'll need 2 pumps, for 6 nozzles (like this system) one pump is sufficient

[@coryholmgreen1947]

Does this still run a nozzle in the charge pipe so the ecu can see the cooling?

[@snowperformance1]

This system doesn't. It injects directly into the runners.

[@CMp-bq1bj]

I live in Canada does meth juice freeze -50 C. I got a n54 135i had to do oil pan gasket and filter housing every other year.

[@snowperformance1]

The boost juice starts to freeze around -54° C, however, a higher concentration of methanol to water will lower the freezing point.

[@bartbersselaar3968]

B58 already

[@blackhorsegaming393]

Can we get a plate for the 4b11/ theta2 engine I would love to run this on my hyundai genesis coupe

[@snowperformance1]

I'll talk with my engineer and let them know the interest in this!

[@CP-jt6bw]

I have the stage 4 computer torqbyte CM5 LT. Do you have any contacts i could hire for installation.

[@snowperformance1]

We do not, but if you contact a performance shop in your area they should be able to help!

[@Triple35i]

Is it safe to run a 50/50 mix (boost juice) on a 6 nozzle Direct port injection set up like this? Or would it cause hydro lock, wound a 80/20 be a better mix for this set up?

[@snowperformance1]

Running the 50/50 would be perfectly fine. In fact, it's what we recommend. Just make sure you have the right nozzle size for your hp/boost rating

[@noneya96]

Would this kit work with the M54B30

[@snowperformance1]

We apologize for the late reply. This should work on your application! The bolt patterns are the same according to our research

[@VoodooE92]

Can I run this with an mhd stage 2+ tune with fbo?

[@snowperformance1]

Water methanol works on nearly every application! I'd consult with your tuner first

[@Madmalchen]

you will want a custom tune with the kit. I have a charge pipe nozzle wmi kit and it works wonders this system will be better as you will get equal spray to all cylinders

[@fillup4598]

@@Madmalchenwhat kit do you use? And did u pay someone else to do it?

[@Madmalchen]

@@fillup4598 I use the AEM kit

[@Madmalchen]

@@fillup4598 Me and my mate fitted it took us about 6 hours as it was first time

[@jake_3946]

had one of these systems fail. it didnt stop spraying and blew my engine. twice! e85 is the way to go. and bullshit this adds "150hp" more like 20

[@drj144]

How bout b48 and b58??

[@snowperformance1]

We don't have a plate for that application, but if you're interested in direct porting it, we offer direct port kits and even offer in-house custom direct ports!

[@122later122]

Is there a System for a BMW G31 530d touring available?

[@snowperformance1]

We have a few universal diesel systems available on our website. What are you looking to gain out of using water-methanol? power, cooling, etc...?

[@122later122]

@@snowperformance1 reducing heat-stress on the components, and running it more efficient

[@snowperformance1]

This system should work, www.nitrousexpress.com/Diesel-Stage-1-Boost-Cooler-Water-Methanol-Injection-Kit-Stainless-Steel-Braided-Line.asp

[@122later122]

@@snowperformance1 thanks a lot 😊👍🏻

[@MatthewFXDRIVE]

I need help I bought the stage one but need this

[@snowperformance1]

Here is a direct port injection plate conversion www.nitrousexpress.com/N54-N55-S55-BMW-Direct-Port-Injection-Plate-Conversion.asp