I used a bottom fan in mine and did not have any problems with cable management. Fractal gives some cable-management suggestions in the manual. The 24-cable can be folded and stuffed between the motherboard and PSU, the 8-pin CPU cable can be folded and run below the motherboard, and the GPU cables go through the spine and up along the back of the case.
Thank you so much for including the CPU/GPU compatibility for all the different options! I **really** appreciate having this as a reference for when I'm choosing parts.
*10.4l. I've had my Terra for 10 days now and so far I really like it. I went with the graphite because while the green is interesting I just can't do green. Build quality is really good and I love the matte black which is much less a fingerprint magnet than other anodized aluminum cases I have owned. Custom cables make using a 120mm fan much easier and just a note it is extremely difficult to fit a fan grill on a 25mm fan, cut out needs to be a bit higher.
People complain that SFF parts are expensive but in reality they really arent. Z690 boards can be found for 200 in good condition or sometimes new, B series being even cheaper. SFX PSU's are usually in the 120-150 range for some 650-750w. Sure if you want 1000w then you'll have to shill out some more but it's worth it to go smaller. I'll never go full tower again
I wish they had made a slightly bigger version that could hold a 240 AIO in the top like the A4-H20, the case looks so nice even moreso in that jade green colourway but the trade offs just aren't worth it when it comes to wanting gaming performance too.
that fully adjustable spine is AWESOME. it was considered a mod on SSUPD cases where we adjust it by using standoffs for motherboard and GPU, it's an excellent feature to have. can maximize the cooler height for whatever GPU.
A slim bottom fan as exhaust would go a long way to help GPU temps and should be easier to install than a full sized fan. This will be my next case whenever I get around to a full system upgrade. I just need to decide on the color.... they all look great.
It's probably my favourite sff case in terms of aesthetics but the lack of cooling options is just disappointing. All the competitors you pointed out (even the ones that are the same volume) manage to fit a 240mm radiator. I really hope they make a larger sff version of the Terra that can fit 2 rads in it
I keep being so close to buying the Terra & seeing if I can make it work. The 1 part I'm keeping for new build is my 3070FTW3, if I pair it with a 7800x3D for gaming with an eye to upgrade GPU in 2-3yrs I don't think I can keep the Terra cool enough & worry it'll sound like a little jet turbine on my desk. I might try a white Ridge instead bcz it can fit a 70mm CPU cooler & maybe a Noctua NH-L12s can fit & keep things cool enough to not be too loud. If Fractal had an NR200 or Revolt 3 sized version of the North I'd be willing to go a bit bigger for better temps & quietness. But I don't want something that you see and immediately think "PC" so while something like the Lian Li Q58 looks great in white to me it's not quite ideal
This is definitely a case you have to build around and choose your components ahead of time. I went with a Ryzen 9 7900 (non X) and I can run Cinebench and never go above 75C using a Noctua NH-L12 Ghost Edition cooler. I have a PCI-E 5.0 SSD with an active cooler that stays cool and quiet and I went with a 7900 XTX Reference card. The build was very loud initially (mostly due to the tiny fan on the SSD) but after tuning, it is no louder than the North tower I was using before. I am in love with this case.
@@jchildr72 Are you saying you did that build in the Terra? That's very intriguing... if you're getting fine temps and sound levels with a Ryzen 9 7900 and a 7900 xtx my 7800x3d & 3070 build might have a chance
Love those vertical slats on the side. Can see stuff on the inside but lets the case breathe unlike a glass window. Also the adjustable center spine is very innovative. Very good-looking case. My favorite ITX so far.
I hope they make mid and full versions of these. It just has more of a “sophisticated” feel/look to them. I’m tired of these gaming looking cases. I want stuff that is low-profile and elegant.
Fractal has been making some downright beautiful cases after getting out of their Define slump and I love it. Other than a minor nitpick in that I wish the wood was actually bordered by some metal, it's gorgeous. I've heard comments here and there about how other cases are more compact and/or provide better CPU cooling options and I'll admit that they have a point, but the Terra still found a great compromise of price, looks, size, ease to build in, and performance. When you consider all those factors, it's pretty amazing.
Best review of this case. I was waiting for Dimitri to get to this, because I knew it was a case he'd love. The aesthetics move the needle, and the interior makes building more sensible with no compromises in cooling
The Jade Terra is absolutely stunning!!! The design of this enclosure looks to be from a boutique company, not a mainstream one like Fractal. Well done!!
I just want to clarify that the adjustable spine isn't new, Fractal just copied W360's Formd T1. Vent design also seems to be identical to the chinese SFF cases, which are good to be honest. Still a good thing fractal does make more mainstream, allowing more SFF choices in the market, making other SFF boutiques more available in supply
Thank you for the great content, as always! :D Also, it would be great if Fractal made a larger version of this case... I mean, why not? there's nothing similar to it out there... and I would prefer to pay more for more space, keeping the amazing and perfect design style.
Agree with the Jade color being the best color of the 3. All are beautiful in their own right. Jade just wins it for me for the reasons Dimitri mentioned. Awesome job Fractal!
I'm not going to lie the thermals leave a lot to be desired but I really love this case design its just so new, good and unique I hope more companies will take a similar approach especially in the ITX case size
Don't really have a need for such a small enclosure but damn is it pretty to look at. Fractal are killing it lately. Ordered myself and a buddy of mine two mesh Norths as soon as we got stock over here and they are absolutely stunning. As a side note, while I wouldn't put my main rig in here, a secondary low powered rig can absolutely be built in this. Get a North for your main rig and this for a secondary one, like a NAS, a server or even a media rig or something.
For itx builds with low cpu cooler clearance. In some cases with a few coolers you can swap the stock 25mm fan with a quality slim 15mm fan to save about 10mm of clearance. That could help some taller low profile cpu heatsinks to fit in your case maybe.
reminds me of a Ghost S1 w/ x2 SMALL top hats (Which are discontinued only Medium and larges avaliable) I still prefer my ghost s1 tbh for the overall outside design. Fractal design has sure brought more attention to mini itx which is great. Love ITX builds.
I personally ordered the Torrent Mini (delivery vehicle was lost it in floods so got a refund), then 8 moved to the Fractal North (Black w/ TG and Dark Timber) and it’s gorgeous to look at and breathes extremely well for my 7950x3D w/ RTX4090 gaming and production pc.
As someone who already adopted sfx itx in a previous build Im happy fractal made this considering the overall design and most importantly it'll be more widely available to the masses compared to my last case Sliger sm550 that ran for 210$ USD back in 2020.
Glad to see this review go up since seeing this case for the first time at Computex. Fractal got my money when I upgraded my mATX case to the Meshify C Mini Black TG And my wife is likely to get a Fractal Pop Mini when she's ready to upgrade. Would love some wood choices at the spot between the North and the Terra
Given the price and the cooling potential, I’ll stick with my A4 h2o. However in the future, I’m pretty sold on the design. Fractal nailed at making something unique
@@ClosedOpenness Um, if Nvidia can build a two slot founders 4070 that sips power and doesn't take the vacuum of space to cool, I think we can build more efficient and smaller cards for modest, compact builds. Not saying that people shouldn't have the right to build 5 slot cards powered by fusion reactors.
Yes I agree it is a interesting case, but It seem like everyone is showcasing this case, what about cooler master new tower (Ncore 100) case that you have props to? Will you be doing a review on that case?
I’ve had this in graphite for 2 weeks now and its beautiful, it matches my style and desk setup perfectly. This is only my 3rd build and it was super easy and fun. I couldn’t be happier. I even managed to fit a strix 3060ti in it with no issues. My cpu temps are actually cooler with the noctua rad/fan in this then they were in my larger itx case with an aio. My cpu is a 5600x.
Honestly if the formdt1 was %30 cheaper and much more readily available, it would stomp this case in every category. Its smaller at less than 10 liters and can fit an aio for the cpu (albeit that aio will have to have one slim fan and one full size fan). Gpu wise it only allows for a 4090 fe and 4090 ventus just like the terra. Heck you can even do a full water cooling build in the formdt1 if you wanted to. The fractal terra is just a case thats form over function. There was no need for it to only allow for one case fan. I love the design but you could get the a4h20 for cheaper and itll offer you more cooling options. Also the formdt1 is the one that introduced the movable spine (although its more manually done than in this case)
Eh... The FormD T1 is still a better sandwich case, smaller, and can fit two 280mm rads, with lots of room for modding. Although I do like the wood finished of the fractal, I wish the T1 would have something similar.
I’m building my first pc ever and I think this will be the case I will go with since I don’t have much space in my room. I mean getting the parts will take months and months maybe even next year, but I’ll can prob buy the case first for now. :) That green will match my room color scheme too.
It's cool. I feel like people who build PCs are quite often into gaming, or need GPU power for something else, so I'd like to see this kind of beautiful case in bigger size.
Question regarding GPU temps. The Gear Seekers channel reversed the direction of the PSU so that the PSU intake fan pulled air away from the GPU and as result they had better GPU temps than this build. My concern about doing that is now your PSU would always be in taking hot air. It just seems like that would be a lot of stress on the PSU. Any thoughts?
Fractal has been blowing it out of the water with their last 3 cases, but its too bad basically nobody designs specifically for mATX. I want the Torrent, North or Terra so bad but they're either too big or too small
The Meshify 2 Mini is a great Micro-ATX case. It can easily fit a dual rad custom loop with 280/240mm radiators and isn’t much larger than a Torrent Nano or an H210. But I prefer the Torrent Nano as it, while being ITX, can house a triple rad setup 😅.
@@disco.volante I currently have a Define C and the Meshifies are pretty much the same thing with a mesh front. I've looked at the Pops but they seem a little cheap and gamery. Not to Fractal's fault of course, it's meant to be a budget case. Their new stuff is just stunning and I feel left out, considering that they actually did keep mATX in mind for the Pop
Always an issue with itx cases, “how bout we go a little bigger” then eventually it just becomes a mATX case. Love this one, but have to go with the Dan c4 to at least for me to maximize the size of my graphics card
Fractal have been designing some really beautiful cases lately.
Yes. So many good options. I'm torn between the North, Torrent compact and the lian li 216.
Agree! Just got the pop mini air and it’s gorgeous, easy to build in, and great airflow
By lately, you mean for 25 years right ? 😂
Great design. But no dust filter. So for me it sucks
Cice*.
Love the green color, I wish more case manufacturers would offer more different colors to choose from.
yeah looks a lot like mint flavored oreo
Agreed. Thermaltake actually had some nice colors at Computex this year too.
i haev always liked green. i think this is why i love san andreas. but that case looks very fresh man. very fresh.
I agree but you know monkey see monkey do.
I used a bottom fan in mine and did not have any problems with cable management. Fractal gives some cable-management suggestions in the manual. The 24-cable can be folded and stuffed between the motherboard and PSU, the 8-pin CPU cable can be folded and run below the motherboard, and the GPU cables go through the spine and up along the back of the case.
did the bottom fan help out a decent amount with thermals?
@@dragonflame9615 Don't know for sure...I never tested without.
Would you mind giving info on which fan you used at the bottom ? :) I have been looking at builds but no one puts fans.
@@ericdong5292 It was a Noctua NF-A12x25 PWM (black version). Just fits beneath a Corsair SF750 power supply.
Thank you so much for including the CPU/GPU compatibility for all the different options! I **really** appreciate having this as a reference for when I'm choosing parts.
Adjustable spine in the center is what makes the FormD T1 v2 a Legend in SFF space.
No channel even comes close to the way you design your videos. The video editing, lighting and cinematography is unmatched. Bravo people.
Wow, thank you! Appreciate the good words 👌
-D.
Optimum tech shits all over this channel
*10.4l. I've had my Terra for 10 days now and so far I really like it. I went with the graphite because while the green is interesting I just can't do green. Build quality is really good and I love the matte black which is much less a fingerprint magnet than other anodized aluminum cases I have owned. Custom cables make using a 120mm fan much easier and just a note it is extremely difficult to fit a fan grill on a 25mm fan, cut out needs to be a bit higher.
Your so whack for only wanting black case. You can totally do green but chose not too.
@@dasani383 fuck green, stop following the crowd coz everyone says its cool.
Wow what an intro, absolutely love your production level.
Absolutely beautiful case is just a shame that ITX motherboards are so dang expensive
yeah for budget ITX builds, go with older gen AM4 or intel 10th-11th gen, those have way cheaper boards
From time to time I've seen AM4 and B660 itx motherboards go on sale for around $110.
Not only the motherboards but also the PSU 😭
You are playing for density! The iTX community is a proud bunch. Stop being in your feelings and get your bread up.
People complain that SFF parts are expensive but in reality they really arent. Z690 boards can be found for 200 in good condition or sometimes new, B series being even cheaper. SFX PSU's are usually in the 120-150 range for some 650-750w. Sure if you want 1000w then you'll have to shill out some more but it's worth it to go smaller. I'll never go full tower again
I wish they had made a slightly bigger version that could hold a 240 AIO in the top like the A4-H20, the case looks so nice even moreso in that jade green colourway but the trade offs just aren't worth it when it comes to wanting gaming performance too.
that fully adjustable spine is AWESOME. it was considered a mod on SSUPD cases where we adjust it by using standoffs for motherboard and GPU, it's an excellent feature to have.
can maximize the cooler height for whatever GPU.
The FormD T1 v2 was the one who introduces this adjustable spine. It was a blessing for SFF.
A slim bottom fan as exhaust would go a long way to help GPU temps and should be easier to install than a full sized fan. This will be my next case whenever I get around to a full system upgrade. I just need to decide on the color.... they all look great.
Ditto! There will be a noticeable improvement in temperatures from this change.
It's probably my favourite sff case in terms of aesthetics but the lack of cooling options is just disappointing. All the competitors you pointed out (even the ones that are the same volume) manage to fit a 240mm radiator. I really hope they make a larger sff version of the Terra that can fit 2 rads in it
Yeah with the current TDP it's a bit crazy to launch something like this.
It's nice but very limited in usage.
I keep being so close to buying the Terra & seeing if I can make it work. The 1 part I'm keeping for new build is my 3070FTW3, if I pair it with a 7800x3D for gaming with an eye to upgrade GPU in 2-3yrs I don't think I can keep the Terra cool enough & worry it'll sound like a little jet turbine on my desk.
I might try a white Ridge instead bcz it can fit a 70mm CPU cooler & maybe a Noctua NH-L12s can fit & keep things cool enough to not be too loud.
If Fractal had an NR200 or Revolt 3 sized version of the North I'd be willing to go a bit bigger for better temps & quietness. But I don't want something that you see and immediately think "PC" so while something like the Lian Li Q58 looks great in white to me it's not quite ideal
@@ThomasSorensen1 wait for the Dan A3 like I will :)
20L dual 360 rad dream of a case. SFF for actual enthusiasts
This is definitely a case you have to build around and choose your components ahead of time. I went with a Ryzen 9 7900 (non X) and I can run Cinebench and never go above 75C using a Noctua NH-L12 Ghost Edition cooler. I have a PCI-E 5.0 SSD with an active cooler that stays cool and quiet and I went with a 7900 XTX Reference card. The build was very loud initially (mostly due to the tiny fan on the SSD) but after tuning, it is no louder than the North tower I was using before. I am in love with this case.
@@jchildr72 Are you saying you did that build in the Terra? That's very intriguing... if you're getting fine temps and sound levels with a Ryzen 9 7900 and a 7900 xtx my 7800x3d & 3070 build might have a chance
So nice of you to review my new case
Love those vertical slats on the side. Can see stuff on the inside but lets the case breathe unlike a glass window. Also the adjustable center spine is very innovative. Very good-looking case. My favorite ITX so far.
I hope they make mid and full versions of these. It just has more of a “sophisticated” feel/look to them. I’m tired of these gaming looking cases. I want stuff that is low-profile and elegant.
Was very close to getting one of these, but I was led to believe the finish was a bit sketchy, so I ended up going with the Formd T1 V2
Been prepping for a new ITX build and this case just might be perfect. Great video and great timing.
Every case reviewed on this channel is legendary, a classic, the best etc....
7:40 wow 🤩 OCZ SSD ….. Blast from the past 💪👍🥰
Fractal has been making some downright beautiful cases after getting out of their Define slump and I love it. Other than a minor nitpick in that I wish the wood was actually bordered by some metal, it's gorgeous. I've heard comments here and there about how other cases are more compact and/or provide better CPU cooling options and I'll admit that they have a point, but the Terra still found a great compromise of price, looks, size, ease to build in, and performance. When you consider all those factors, it's pretty amazing.
Best review of this case. I was waiting for Dimitri to get to this, because I knew it was a case he'd love. The aesthetics move the needle, and the interior makes building more sensible with no compromises in cooling
The Jade Terra is absolutely stunning!!! The design of this enclosure looks to be from a boutique company, not a mainstream one like Fractal. Well done!!
Beautiful case and that jade green colour, pure class. 💚
I like how you lined up those vent wallpapers there. very nice
I got this case a couple days after it was released at Computex. The Fractal Terra and the Lian Li A4 H20 are among the best ITX cases on the market.
Don’t agree, FormD T1 and upcoming NCase M1 Evo is so much better
I just want to clarify that the adjustable spine isn't new, Fractal just copied W360's Formd T1. Vent design also seems to be identical to the chinese SFF cases, which are good to be honest. Still a good thing fractal does make more mainstream, allowing more SFF choices in the market, making other SFF boutiques more available in supply
Thank you for the great content, as always! :D Also, it would be great if Fractal made a larger version of this case... I mean, why not? there's nothing similar to it out there... and I would prefer to pay more for more space, keeping the amazing and perfect design style.
Agree with the Jade color being the best color of the 3.
All are beautiful in their own right.
Jade just wins it for me for the reasons Dimitri mentioned.
Awesome job Fractal!
08:39 love it( the hit sound)
did not think i'd be ditching my FormD T1 so soon, but here we are. That Jade is too nice looking
I'm not going to lie the thermals leave a lot to be desired but I really love this case design its just so new, good and unique I hope more companies will take a similar approach especially in the ITX case size
That Jade case is gorgeous 😍
Don't really have a need for such a small enclosure but damn is it pretty to look at. Fractal are killing it lately. Ordered myself and a buddy of mine two mesh Norths as soon as we got stock over here and they are absolutely stunning.
As a side note, while I wouldn't put my main rig in here, a secondary low powered rig can absolutely be built in this. Get a North for your main rig and this for a secondary one, like a NAS, a server or even a media rig or something.
If anything Fractal are the KINGs of making beautiful cases.
Especially the ITX-Mini ITX varietys.
Yes! They need to make these multiple colour choices a thing. Although we can always DIY paint, but I would prefer if I don't have to do it myself.
For itx builds with low cpu cooler clearance. In some cases with a few coolers you can swap the stock 25mm fan with a quality slim 15mm fan to save about 10mm of clearance. That could help some taller low profile cpu heatsinks to fit in your case maybe.
OMG I love the Jade
Finally You got it! Good job!
I said a couple of years ago that Fractal lost its luster & for a while they did. Glad they found their stride again.
The green is stunning
Ok that shot at 3:05 was noticed and appreciated. Who’s idea was that?
reminds me of a Ghost S1 w/ x2 SMALL top hats (Which are discontinued only Medium and larges avaliable) I still prefer my ghost s1 tbh for the overall outside design. Fractal design has sure brought more attention to mini itx which is great. Love ITX builds.
8:18 ''No way José'' 👌
Love the design, like a piece of quality hifi or furniture imo👍
I have a fractal north and I love it, this company is going places.
I feel like this case perfectly scratches the itch a lot of us have been missing over recent years with itx
I personally ordered the Torrent Mini (delivery vehicle was lost it in floods so got a refund), then 8 moved to the Fractal North (Black w/ TG and Dark Timber) and it’s gorgeous to look at and breathes extremely well for my 7950x3D w/ RTX4090 gaming and production pc.
Just built my first pc in this case and LOVE it!
That jade is very nice looking!
Thank you for that cpu/gpu compatibility chart. This videos make me buy it”
Any idea what mouse that is at 7:02?
The green is nice!
Whats is that mouse @7:04 minutes???
This is on my list if I am doing an itx build. Looks great and doesn't look like a too big of a pain
As someone who already adopted sfx itx in a previous build Im happy fractal made this considering the overall design and most importantly it'll be more widely available to the masses compared to my last case Sliger sm550 that ran for 210$ USD back in 2020.
Glad to see this review go up since seeing this case for the first time at Computex.
Fractal got my money when I upgraded my mATX case to the Meshify C Mini Black TG
And my wife is likely to get a Fractal Pop Mini when she's ready to upgrade. Would love some wood choices at the spot between the North and the Terra
Dang that's a beautiful case!
This thing would work amazingly for a living room couch PC!
Wait... Did you just say Lianli A4-h-twenty at 6:35?
Looks like a perfect case!
I wish release a taller version for a 240mm AIO cooler on the top
Had a node 202 for about 5 years now. Will buy this as soon as it's available in India!
I wanna build an entertainment center PC just to use this case. Looks so clean.
These are the kind of PC cases I’ve been wanting for a loooong time. PC’s are finally attractive.
What about 10mm slim fans at the bottom on the exterior of the case for exhaust. They may fit if the feet are tall enough. That would help with Temps.
Looks absolutely amazing. Would love to have one
It's pretty and I love that green. If I could get the fractal north in that green, it would be my end game :)
Given the price and the cooling potential, I’ll stick with my A4 h2o. However in the future, I’m pretty sold on the design. Fractal nailed at making something unique
Terra means earth in latin, not in “sci-fi terms”
🤓☝️
In italian Terra is Earth's name, kind of like Luna. Other romance languages still use those names or have very similar words. It can also mean land.
ur not a fun person
wahh
also italian
I like it. The biggest issue for me is GPU size. We should have more options at the single / duel fan, two slot for graphics cards.
Then you get a bigger case. That’s not what this is for.
@@ClosedOpenness Um, if Nvidia can build a two slot founders 4070 that sips power and doesn't take the vacuum of space to cool, I think we can build more efficient and smaller cards for modest, compact builds. Not saying that people shouldn't have the right to build 5 slot cards powered by fusion reactors.
Good competition for the FormD T1!
Darn saucy case. But no dust filters?😊
Fractal just made the perfect itx case 🤩
Does anybody know what the mouse on the desk at 7:02 is?
Yes I agree it is a interesting case, but It seem like everyone is showcasing this case, what about cooler master new tower (Ncore 100) case that you have props to? Will you be doing a review on that case?
That's a solid WOOD
Great case but here in Italy is so hard to find one! Amazon lists their preorder starting from february 2024 :/
I thought this case should be granted with your damn innovation award.
Nothing really innovative in its form. I mean it’s all new to Fractal (sandwich ITX) but this frame style has been around for a while.
-D.
The Dan case doesn't need a riser cable. That should always be mentioned.
Unfortunately a little bit too small for my system, but oh man it's really beautiful! Good job Fractal.
What are some other cases with the GPU on top like the new Dan Case? It seems like a really good layout.
Any plan on doing a review on the audeze maxwell?
Silver and Graphite are S tier. Jade is God Tier. I hope they offer that colorway in future versions of the Fractal North! 💚💚💚
Nice case, absolutley. But this is a basicly a little bigger Ghost S1.
I’ve had this in graphite for 2 weeks now and its beautiful, it matches my style and desk setup perfectly. This is only my 3rd build and it was super easy and fun. I couldn’t be happier. I even managed to fit a strix 3060ti in it with no issues. My cpu temps are actually cooler with the noctua rad/fan in this then they were in my larger itx case with an aio. My cpu is a 5600x.
$179 eh.
100 - the walnut.
79 - the rest of the case.
Eh, I'm not THAT NUTS!
that wood is a living organism its like paying for a strand of an artist's hair
It is recommended to point the bottom fan as exhaust. It will help draw away hot air from the GPU.
Very comprehensive review of a beautiful case. I think this is the one that's going to get me to finally switch to ITX.
Honestly if the formdt1 was %30 cheaper and much more readily available, it would stomp this case in every category. Its smaller at less than 10 liters and can fit an aio for the cpu (albeit that aio will have to have one slim fan and one full size fan). Gpu wise it only allows for a 4090 fe and 4090 ventus just like the terra. Heck you can even do a full water cooling build in the formdt1 if you wanted to. The fractal terra is just a case thats form over function. There was no need for it to only allow for one case fan. I love the design but you could get the a4h20 for cheaper and itll offer you more cooling options. Also the formdt1 is the one that introduced the movable spine (although its more manually done than in this case)
Will there a review soon on the phanteks polar t6 air cooler?
Eh... The FormD T1 is still a better sandwich case, smaller, and can fit two 280mm rads, with lots of room for modding. Although I do like the wood finished of the fractal, I wish the T1 would have something similar.
i got the jade one, love it so far. my first ever pc build
I’m building my first pc ever and I think this will be the case I will go with since I don’t have much space in my room. I mean getting the parts will take months and months maybe even next year, but I’ll can prob buy the case first for now. :)
That green will match my room color scheme too.
It's cool. I feel like people who build PCs are quite often into gaming, or need GPU power for something else, so I'd like to see this kind of beautiful case in bigger size.
Question regarding GPU temps. The Gear Seekers channel reversed the direction of the PSU so that the PSU intake fan pulled air away from the GPU and as result they had better GPU temps than this build. My concern about doing that is now your PSU would always be in taking hot air. It just seems like that would be a lot of stress on the PSU. Any thoughts?
Loving the Fractal North and being impressed by the Terra, I really hope they bring a North Mini which is build around mATX!
Fractal has been blowing it out of the water with their last 3 cases, but its too bad basically nobody designs specifically for mATX. I want the Torrent, North or Terra so bad but they're either too big or too small
The Meshify 2 Mini is a great Micro-ATX case. It can easily fit a dual rad custom loop with 280/240mm radiators and isn’t much larger than a Torrent Nano or an H210. But I prefer the Torrent Nano as it, while being ITX, can house a triple rad setup 😅.
@@disco.volante I currently have a Define C and the Meshifies are pretty much the same thing with a mesh front. I've looked at the Pops but they seem a little cheap and gamery. Not to Fractal's fault of course, it's meant to be a budget case. Their new stuff is just stunning and I feel left out, considering that they actually did keep mATX in mind for the Pop
Can you fit a stock AMD HSF when using a 2 slot GPU?
Where did the Jade color go? It's gone from Newegg
Always an issue with itx cases, “how bout we go a little bigger” then eventually it just becomes a mATX case. Love this one, but have to go with the Dan c4 to at least for me to maximize the size of my graphics card
Install graphic card outside on monitor much more cooler.