Really enjoyed watching the video although I am still not confident in my abilities to diagnose and or perform updates. I am taking it the dealership in the morning, the service adviser said it can take 2-4 hours to do a software update. You diagnosed and clouded a brand new module in less then 13 min lol sure wish y’all were local. Thanks
I have a 2022 Z4 M40i and BMW updated the Bosch protection on any ECU’s with a 06/2020 production date or later. If I were to get a pre 06/2020 production ECU and clone it, is it possible to have it match my vehicles VIN? I’m considering cloning so I can unlock the ECU and run a flash tune.
Hello, this is a video of me using a diagnostic device to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look and open up a new idea!
Is it better to return my original ecu to stock tune before sending it in? Or would it be the same if I need to return my cloned ecu to stock, as far as loading the stock tune file back in.
I just ordered a PCU that is plug and play for a 1996 Nissan Quest. I gave them my only my VIN#. no PATS system. Do you think I’ll be able to just plug the new one in and drive away without problems?
I ordered 1 online before, claimed plug & play, pre-programmed. But pins were messed up and not pre-program at all. So hard to know about your case, let's just pray, lol
Hello, this is a video of me using a diagnostic device to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look and open up a new idea!
Hello, I recommend Phoenix Elite to you, here is a video of me using it to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look.
My wife had a front end impact a few years ago and ever since it has had weird issues like the interior lights not functioning/rear seat controls do not work to fold seats down/steering wheel buttons not working properly. Example of the steering wheel is that the volume down actually does volume up. Would this point to an ECU issue on her 2016 Ford Explorer perhaps, or would this be something entirely different? Exploring my options to try and help get it fixed without going to the dealership.
Hello if the ECU is right behind the bumper then my guess would be that the ECU is the problem. If there are any diagnostic trouble codes that you can check out i think that would help you out a bit
Hi, Phoenix Elite seems to support your model until 2018. This is the video I used to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look and refer to it.
You guys still offer this service? Had the same thing happen to me! Pinched the wiring harness putting the trans in, thought nothing of it and zap. Shorted out my tcm.
What if my original ecu board is dead ie no communication from board? how its possible to get my data off original board onto the new used second hand ecu?
What's the point of cloning a computer that have the same part number? I thought you could clone any computer as long as it was the same model vehicle computer
Really enjoyed watching the video although I am still not confident in my abilities to diagnose and or perform updates. I am taking it the dealership in the morning, the service adviser said it can take 2-4 hours to do a software update. You diagnosed and clouded a brand new module in less then 13 min lol sure wish y’all were local. Thanks
Best of luck!
@VEHIX411
Would this be the same procedure for 08 F250? Does it matter if the "data bank corrupted" making the VIN show as "a"?
Nice walkthrough !!
I have a 2022 Z4 M40i and BMW updated the Bosch protection on any ECU’s with a 06/2020 production date or later. If I were to get a pre 06/2020 production ECU and clone it, is it possible to have it match my vehicles VIN? I’m considering cloning so I can unlock the ECU and run a flash tune.
Salut merci pour la vidéo toujours top
Thx 🙏 total lifesaver
Hello, this is a video of me using a diagnostic device to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look and open up a new idea!
great job
What tool recommend on f150 2021 5.0
Is it better to return my original ecu to stock tune before sending it in? Or would it be the same if I need to return my cloned ecu to stock, as far as loading the stock tune file back in.
Nice job how Can we copy file from original BCM to new one
What is the cost to setup system like that, what qould you charge to program ford taurus ecm?
is the set of key of the car will match after reprograming ?🤔🤔🤔🤔🤔🤔
Yes its a clone
I just ordered a PCU that is plug and play for a 1996 Nissan Quest. I gave them my only my VIN#. no PATS system. Do you think I’ll be able to just plug the new one in and drive away without problems?
I ordered 1 online before, claimed plug & play, pre-programmed. But pins were messed up and not pre-program at all. So hard to know about your case, let's just pray, lol
Thanks for sharing.
Hello, this is a video of me using a diagnostic device to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look and open up a new idea!
Can you do the AC11-12A650-BC Ford Transit Ecu Diesel please
what if the part number not exactly the same bit still has the same size ?
I just tried doing a 2016 mazda6 PCM. I did the vin, key and as built data. The car would not crank at all.
What programmer your using
Xtool d9s
Hi. I need assistance with ford focus 2L tdci
Do you have the tools or you need it done for you ?
Emailed you guys at the aol account!
Seen it waiting for you to send ecu part numbers
master, where can I buy the program tool, and the training, the type of tool. thanks
Hello, I recommend Phoenix Elite to you, here is a video of me using it to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look.
Autel reads old and loads it on new one in less than 5 minutes, changes vins etc
It changes vins??
great!!! thanks
I thought a fuse would blow before damaging a ecm
My wife had a front end impact a few years ago and ever since it has had weird issues like the interior lights not functioning/rear seat controls do not work to fold seats down/steering wheel buttons not working properly. Example of the steering wheel is that the volume down actually does volume up. Would this point to an ECU issue on her 2016 Ford Explorer perhaps, or would this be something entirely different? Exploring my options to try and help get it fixed without going to the dealership.
Hello if the ECU is right behind the bumper then my guess would be that the ECU is the problem.
If there are any diagnostic trouble codes that you can check out i think that would help you out a bit
If you clone the original doesn’t the VIN and everything on the original transfer over? If it does why flash it at the dealer?
If you clone then there is no need to flash anything
Does the tool cloned correctly this ecm
yes
Do you have a link to the hextag you used?
Does this tool work for 2015 f150 3.5 ecotec?
Hi, Phoenix Elite seems to support your model until 2018.
This is the video I used to replace and adapt the PCM module for Ford: th-cam.com/video/BizkbXqnv2Y/w-d-xo.html, maybe you can take a look and refer to it.
You guys still offer this service? Had the same thing happen to me! Pinched the wiring harness putting the trans in, thought nothing of it and zap. Shorted out my tcm.
Karmanauto.com
What if my original ecu board is dead ie no communication from board? how its possible to get my data off original board onto the new used second hand ecu?
Computer resource can remanufacture a new Ford ECU with Keys based on your VIN. You would need to just have the Keys cut.
@@davidhall3747 all sorted now 2nd hand ecu and my old keys programmed £180 lighter on the pocket but I'm happy all is working again.
@@damoblake6000 Sounds great. Glad you resolved your problem.
@@damoblake6000 which place ,please
transfer the pcm and paths system from another working car, still need programming
What's the point of cloning a computer that have the same part number? I thought you could clone any computer as long as it was the same model vehicle computer
Do you know of anyone who can reprogram a Ford computer to remove PATS and PIDS For a custom installation. I'm putting a Ford godzilla into a 40 Ford.
Appending vs copying and rewriting.....
What are the three connectors for
What connectors are you talking about on the ecu ?
@@vehix411 B1 B2 B3