Given that BMW just had a successful year, outselling both Merc and Audi, I would have to say that you’re very much in the minority in that way of thinking.
Great job and video guys - got a subscriber out of me 👍🏼👍🏼. If that was the paint job I’d got by BMW, it would have gone back or they’d be picking up the cost for your work. I had some work done on my car after some damage (Mineral white pearl) and they actually did a fantastic job. I did some final polishing on it, but I was very impressed generally. Just goes to show the consistency isn’t there at all.
Thanks for the comment! Mineral white is a very difficult colour to paint, so I’m glad to hear you had a good experience! Unfortunately we see so much bad workmanship
superb finish, the paint, wheels and calibers looks stunning. the only point I disagree with is that the refurb diamond cut is better than OEM, going back the 19s I had on my E46 M3 and even on my current 20s 666 on F82, id rather drive with.tiny kerb mark(channel tunnel train is far too narrow!) and leave the finish OEM, it has a better mirror look rather than the lightly grooved re cut look.
First time on your channel and love the work your doing , just been through my RS4 doing most of the work myself apart from ppf, hit the subscribe button and looking forward to more. Shame I’m not closer as I’d get my wheels sorted as lacquer peel on rears doing my head in 😫
Brilliant job! Pity the BMW 'Approved' bodyshop produced such a poor respray job but most bodyshops, approved or not do not do the respray job correctly!
Hi guys would have preffered a more detail on your work you did to the car ie: more of the polishing or doing the paintless dent removal.Did you do any work inside the car like the upholstery? etc Can't believe the customer didn't put a ceramic coat on the car and the wheels. Would keep the hard work you guys put into it for a good number of years. Nice work though. Thanks for sharing👍
Hi Fellas, First time viewer who loves the car detailing videos on here to help me learn the art of maintaining my daily driver in tip top condition. Please show more detail on the work being done, perhaps a voice over as we watch the work being done? The M4 looked absolutely superb afterwards, good work, I will definitely subscribe to view future content. Thank you 👏
Lovely work - would be great if the vids were slightly longer to show more of what’s being done and maybe some customer reactions - will give it a sub nonetheless
Thanks for your comment, we use a range of sanding machines, the one in the video was a Ryobi orbital sander from Halfords, actually did the job very well. We also use a smaller 2” rotary sander for the smaller areas, and some other parts need to be done by hand. It would certainly be time consuming to do the whole car by hand, and the machine gives a consistent finish
That older model of M4 looks SOOOOO much better than the new M4
I agree. Until recently I wasn’t a BMW fan, but the new models look horrible.
Given that BMW just had a successful year, outselling both Merc and Audi, I would have to say that you’re very much in the minority in that way of thinking.
@@gaara4667 I’m the minority that wouldn’t buy the new one! In Northern Ireland I don’t see many new models
@@stewarty28 Yh that’s what I said. The minority.
Old one looks good. But new one looks good too.
Wow, only 800 subs? TH-cam can be a tricky business (tell me about it haha). You guys deserve way more than this!
Thank you so much!
First time viewing on your channel and brilliant work guys very impressed!! Love all your professionalism
Fantastic! such a satisfying video, with your attention to detail.
Beautiful video! Make more content like this
Take the watch of bro it will damage the car
I am u r 708 sub ❤️ from india bro pls do m5 brother
I am 300 view is mee❤️
Great job and video guys - got a subscriber out of me 👍🏼👍🏼. If that was the paint job I’d got by BMW, it would have gone back or they’d be picking up the cost for your work. I had some work done on my car after some damage (Mineral white pearl) and they actually did a fantastic job. I did some final polishing on it, but I was very impressed generally. Just goes to show the consistency isn’t there at all.
Thanks for the comment! Mineral white is a very difficult colour to paint, so I’m glad to hear you had a good experience! Unfortunately we see so much bad workmanship
Great video guys!
Thanks so much!
Nice turnaround 👌🏻👌🏻
It’s stunning colour SMB.
All that attention to detail tho then fit the brake discs on the wrong side 🫣🫡
Thank you! And great spot, luckily we noticed our blunder and changed it prior to handing it over to the customer 😜
I'd have preferred more footage of the work being done as opposed to just talking about it and b-roll footage
Thanks for your feedback we really appreciate it and will include more detail in future videos
superb finish, the paint, wheels and calibers looks stunning. the only point I disagree with is that the refurb diamond cut is better than OEM, going back the 19s I had on my E46 M3 and even on my current 20s 666 on F82, id rather drive with.tiny kerb mark(channel tunnel train is far too narrow!) and leave the finish OEM, it has a better mirror look rather than the lightly grooved re cut look.
Very good job Guys! 👍
you already know they are going to blow up, perfect editing
Awesome work!
First time on your channel and love the work your doing , just been through my RS4 doing most of the work myself apart from ppf, hit the subscribe button and looking forward to more. Shame I’m not closer as I’d get my wheels sorted as lacquer peel on rears doing my head in 😫
BMW genuinely got the design for that gen M3/4 spot on
Just getting better with age
Yeah bruh, that diamond cut looks better than the OEM 100%
Brilliant job! Pity the BMW 'Approved' bodyshop produced such a poor respray job but most bodyshops, approved or not do not do the respray job correctly!
Hi guys would have preffered a more detail on your work you did to the car ie: more of the polishing or doing the paintless dent removal.Did you do any work inside the car like the upholstery? etc Can't believe the customer didn't put a ceramic coat on the car and the wheels. Would keep the hard work you guys put into it for a good number of years. Nice work though. Thanks for sharing👍
Class Video , shame you are down south as id use you boys for my cars
BMW wouldn’t do a shit job, that’s bollocks
Yep, we made it all up 😏
Hi Fellas,
First time viewer who loves the car detailing videos on here to help me learn the art of maintaining my daily driver in tip top condition.
Please show more detail on the work being done, perhaps a voice over as we watch the work being done?
The M4 looked absolutely superb afterwards, good work, I will definitely subscribe to view future content.
Thank you 👏
So much respect for bringing this car back into its prime.
Absolutely gorgeous, you have don't an amazing job there, great presentation skills 😊
amazing effort n result!! well done to the team 👏 🎉
Looks like a CS! Well done boys
Good job lads, great attention to detail. Do you guys cover the North West England?
I'll subscribe when my guy leave Rollex at home and put on G Shock to work with..
what's wrong with working with a Rolex? Rolex were always tough watches for everyday use
❤
Amazing to see how it loos like before and after.
You guys are legit
Lovely work - would be great if the vids were slightly longer to show more of what’s being done and maybe some customer reactions - will give it a sub nonetheless
Thank you for the feedback
Gonna have to find that fitment for mine!
What blue is this spec. Is it a individual colour?
yep individual san marino blue
Amazing work,.what machines are you using to wet sand, looks like you do it by machine rather than hand, the latter takes ages.
Thanks for your comment, we use a range of sanding machines, the one in the video was a Ryobi orbital sander from Halfords, actually did the job very well. We also use a smaller 2” rotary sander for the smaller areas, and some other parts need to be done by hand. It would certainly be time consuming to do the whole car by hand, and the machine gives a consistent finish
@@aspectdetailing thanks for the tips, I am still not brave enough to use a machine to wet sand.
Great Video! What color is it?
Thank you! It’s San Merino Blue
perfection, subd
Much appreciated!
Excellent work.
Thank you 🙏🏻
Great job!
NB: The rotors are mounted on the wrong sides
good catch, not good for longevity of rotors and pads since they can’t cool effectively
Great spot! Luckily we did notice and changed them before we handed over the vehicle