@@emmanueledem4217 Thanks for ur comment. The best way to expect more is by supporting the work through watching, liking, commenting and sharing the videos. I will definitely do more... So put in ur support and u will get the best here.
It depends on the situation at hand. Formwork are placed before reinforcement but in the case where the formwork will obstruct the passage and placement of reinforcement, then the reinforcement should be fixed first before formwork. Remember, in civil Engineering nothing is cast on Stone.... Everything is possible.
It's just a compound mixed into molten form and then used to fill up the 50mm space. U can see such space in some of street/road lights u passed by the road.
@@OkurinmaPrecious Watch it over and over again. Everything will be clear. If there's something u still don't understand...U can ask me, that's why I am here. If u do that in all the videos here.....U will be amazed at ur speedy growth in construction.
@@davidarinze Watch it over and over, u will get everything clearly. Then if there's still something u don't understand.... U can then ask Me.... That's why I am here. That's how to learn. Thanks
@@brybelchez3433 Grouting is needed in some cases Sir. Even though it's still good and more economical to place the Base plate directly on the Concrete Pedestal. You can check my recent video SIR. The Base plates were placed directly on the Concrete Pedestal as u said. Thanks for your Comment and review.
Sir, please how can the 50mm grouting be achieved on site and also the those nuts under the base plate won't it wash away from the bolt due to the application of load from the building
@@ChinonsoOgalanya The grout is compound mixed into a molten form and it will be applied with a spoon like tool. As for the downward BOLTS.... No, it won't go down under loading. U can check some of the street/road lights you passed along the road, they are light that some are even without Grout.
Very impressive❤
Thanks so much for ur Comment and good review.
Just stay tune more and better ones are coming
Great job sir 👍
Great job 👍
@@Blessingkekue
Thanks so much for your good comment
This video reminds me of my industrial training this, expecting more from you Sir 😊😊
@@emmanueledem4217
Thanks for ur comment.
The best way to expect more is by supporting the work through watching, liking, commenting and sharing the videos.
I will definitely do more... So put in ur support and u will get the best here.
So great
@@FavourSalo
Thanks
Good job
Impressive ❤️
@@AttehFelixfolusayo
Thanks so much for your good comment. Stay tune more are coming.
Impressive 🎉🎉
Thank you so much for your good comment and review.
I will be uploading more and better videos. So stay tune.
Thanks for sharing
@@Visualstory247
Thanks for ur review
Helpful
Helpful, though I'll make more research on grouting❤️
@@MartinsMiracle-k4s
Alright.... please do for more knowledge
Should formwork be placed before or after reinforcement
It depends on the situation at hand. Formwork are placed before reinforcement but in the case where the formwork will obstruct the passage and placement of reinforcement, then the reinforcement should be fixed first before formwork.
Remember, in civil Engineering nothing is cast on Stone.... Everything is possible.
I desire this great wisdom lord
Why we use groute?
Please how is the grouting done, it was not shown
It's just a compound mixed into molten form and then used to fill up the 50mm space.
U can see such space in some of street/road lights u passed by the road.
Thanks for sharing 👍. I need engineer drawings for a 20x20 carport footing and foundation that will hold solar panels. 1 h beam on 2 sides at 10ft max
Sir, is the foundation done without depth or it's just for teaching purpose
I brought out the foundation for it to be very visible for learning.... But just know that all these things are done in the ground. Ok
@@keksconstructionengineering Okay sir
Nice, but I didn't really grab ....
Trying to relate it with the drawing
@@OkurinmaPrecious
Watch it over and over again. Everything will be clear. If there's something u still don't understand...U can ask me, that's why I am here.
If u do that in all the videos here.....U will be amazed at ur speedy growth in construction.
Great wall🕌
@@alisharif1997
Thanks a million
Nice one sir.
But it's a kind of hard trying to relate it with the drawing. But it's ok
@@davidarinze
Watch it over and over, u will get everything clearly. Then if there's still something u don't understand....
U can then ask Me.... That's why I am here.
That's how to learn.
Thanks
@@keksconstructionengineering Alright sir
@@davidarinze
Alright.
Just stay tune, more and more will be coming..
Watch, like, Comment and share
Grouting not needed. Direct plate to plate is better
@@brybelchez3433
Grouting is needed in some cases Sir. Even though it's still good and more economical to place the Base plate directly on the Concrete Pedestal.
You can check my recent video SIR.
The Base plates were placed directly on the Concrete Pedestal as u said.
Thanks for your Comment and review.
Sir, please how can the 50mm grouting be achieved on site and also the those nuts under the base plate won't it wash away from the bolt due to the application of load from the building
@@ChinonsoOgalanya
The grout is compound mixed into a molten form and it will be applied with a spoon like tool.
As for the downward BOLTS.... No, it won't go down under loading.
U can check some of the street/road lights you passed along the road, they are light that some are even without Grout.
@@keksconstructionengineering thanks
Very impressive 💯💯💯
解放前，上海国际建筑商一流女泥瓦匠株琳（女泥水工）的丈夫王蜻蜓出外谈生意。解放前，上海国际建筑商一流女泥瓦匠株琳（女泥水工）的丈夫王蜻蜓出外谈生意。解放前，上海国际建筑商一流女泥瓦匠株琳（女泥水工）的丈夫王蜻蜓出外谈生意。
Dreadful audio computerspeak.
@@professor-viewsalot
Sorry about that...
I will fix that in subsequent ones.
Thanks for your good review