Plastic Dewatering Machine (PP Big Bag) / YATAY SIKMA MAKİNASI
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2024
- HORIZONTAL DEWATERING MACHINE (TESTING)
Ps: Now we have newer Model
Plastic Film Dewatering Machine is one of the most important machines in Plastic Recycling line. All the crashed and washed contaminated Plastic FILM materials, Before Extrusion dewatered by this machine
Material dewatered mechanically and it will not require an operator.
Special designed heavy-duty screw and barrel will reduce the humidity level down to 4 - 8 %, and this will reduce the electricity consumption for next drying phase.
Easy to maintain and it is very hard to breakdown.
Made of heavy-duty steel sheets with gas-metal arc welding (GMAW) method.
Output capacity is between 150 - 1000 kg/hr.
Yatay Sıkma Makinası kirli Plastik FILM (Naylon) malzemelerin Yıkama hattında kırılıp yıkanmasından sonra Extrüzyon öncesi, Plastik Naylon (Film) malzemelerin sıkma yani Susuzlaştırılma işlemi için kullanılan bir makinadır.
Malzeme mekanik olarak sıkılıp, susuzlaştırılır.
Bakımları basit olup kolay, kolay arıza yapmaz ve operatöre de ihtiyaç duymaz.
Ön Rulman yatakları döküm olmayıp çelikten yapılmıştır
Özel tasarlanmış güçlü Konik Vida sayesinde nem oranı %4 ile %8 seviyesine düşürülür ve bir sonraki kurutma aşaması için enerji sarfiyatını minimuma düşürür.
Ağır hizmet çeliği ve sacdan, Gaz altı kaynak ile imal edilip güçlü bir şasiye sahiptir.
Müşteri talebine bağlı olarak 150 - 1000 kg/saat kapasitede arasında üretilir
pinarli1964@gmail.com
ismail@netplasmak.com
+90 532 616 2299
Good shit!
भैया आपके इस से आछा मिक्सर में सुख जाता है ।
What did you do to the water after squeezing?
You can recycle, reuse or just throw it out
Вершина конструкторской мысли, СУПЕРМЕГАГОВНОДРЫЗГАЛКА, таджики в комплект не входят.
Я не понял, для чего это?
А тут никто не понял...
Снятый защитный кожух, вращающийся шкив с ремнями и турок с мешком стекловаты. Что может пойти не так???
भारत मैं कहां पर अवेलेबल हो सकेगी
A funnel on the feeder would make life easier.
There will be a blower after compilation for transfering the dried material.
Anyone likes to have more info please feel free to contact me +90 532 616 22 99 ismail@netplasmak.com
How about centrifugal
A big spinner with a tipping system would be easier and cheaper
İçinde yüzseydi elemanlar.
I Have to buy adewatering machine
pls send your contact address
I m looking for noiseless plastic scrap cutter
ismail@netplasmak.com / +90 532 616 2299
I have to clear up what I meant I know what it's doing what's the point of getting hot and heavy over this
We were tasting the machine
Yummy?
Ab iska kya hoga....
Plastic ka
भाई ये कह मियेगी मशीन
Is there a point to this
This is part of LDPE Film plastic Recycling machine. After washing the waste plastic this machine dries the plastic before the extrusion process.
Machine ka size and weight and cost kya h sir
ismail@netplasmak.com / +90 532 616 22 99
@@NETPLASMAKMakina I'm interested my phone no. 09414789135 is ka video send me
Que M é esta??🤔🤔🤔🤔
Good idea, bad execution.
Странно приемник организован, удобно наверное пипец. Ну о отжим на высоте. Весь в муке и х** в руке
tas vendendo maquina ou cd tira a musica
Ambas :)
That's a waste of time cause its falling back in water
This was only testing. Normally there will be blower that will transfers dry materials trough pipes to silo.
morron engine
ماذا تفعل هذه الآلة؟؟
ابراهيم مرغني انها تعصر البلاستك المفروم يوضع عليه اولا الماء مثل عملية الغسل
مجفف لتنشيف البلاستك.اثناء الغسيل
محمد محفوظ yes
Awkward, disorganized, and messy...whatever the were doing.
it is testing after finish tests it will be covered 🤗
fiyati ne kadar
+90 532 616 22 99
ismail@netplasmak.com
iss bakwas machine ka faida
طريقه فاشله.. وبطيئه
Does NOT work!
???