10.5-inch iPad Pro Display Assembly Repair Guide - Fixez.com

iPad Pro 10.5 LCD Screen and Digitizer:
Black: bit.ly/2Ds7gMN
White: bit.ly/2Hz6wbi
iPad Pro 10.5" Screen Replacements and Repair Parts: bit.ly/2smL46b
iPad DIY Repair Tools: bit.ly/2lzLIop
Watch the Official 10.5-inch iPad Pro Display Assembly Repair Guide. Following the step-by-step iPad Pro 10.5" screen replacement instructions we have provided will help you safely fix a cracked or damaged 10.5-inch (diagonal) LED-backlit Multi-Touch display. Visit Fixez.com for all of the DIY iPad Pro replacement screens, parts and tools you need to fix your phone quickly, and affordably.
If you need your Apple tablet repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or [e-mail] and they will fix your device for you. They are available Monday - Friday, 9am to 5pm PST.
Subscribe to our TH-cam Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
iPad Pro 10.5" Display Assembly Repair Video Steps:
Step 1
• Power down your 10.5-inch iPad Pro tablet.
Step 2 (iPad Pro 10.5 Display Assembly)
• The fully laminated 10.5-inch iPad Pro Oxide TFT “True Tone” display assembly is glued on solidly and is a tight fit within the rear case. Apply heat to soften the adhesive.
• Use the precision knife to create enough space to insert a triangle opening tool.
• Use triangle opening tools to slice thru the strong adhesive and carefully decouple the iPad Pro screen. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPad’s logic board.
• Remove the following 2 Phillips screws securing the bracket that covers the display’s cables.
• With the bracket out of the way, detach the cables from the logic board and free the 10.5-inch iPad Pro display assembly.
Step 3 (iPad Pro 10.5 Home Button and Touch ID Assembly)
• Peel up the piece of black tape.
• Release the ZIF connector and carefully slide out the home button assembly cable.
• The bracket that secures the iPad Pro home button and touch ID is held in place with two gobs of adhesive. Use the spudger to pry it up from the front panel.
• Remove the 10.5-inch iPad Pro home button and touch ID assembly.
To reassemble your device, follow the steps in reverse order.

[@valentinstefan4803]

Replace without disconnecting the battery??

[@Dr.Akakia]

How new screen fit at last? Does it need heat again? Or u simply put it there and it fix?

[@NadimALMallah]

I broke my screen but I can't find a new screen where I live, from where I can order? I have the new iPad Pro 10.5

[@AWAISCHUGHATTA]

Nadim AL-Mallah parts are so scarce right now for this iPad.

[@milliyetciturkiye6649]

nokia 3310 please

[@sertacatac8141]

Just look up on the google, may fit right buddy

[@Rahul-ef2ou]

MİLLİYETÇİ TÜRKİYE just drop it