Jet Boat Amphibian Build First Ride
ฝัง
- เผยแพร่เมื่อ 29 มี.ค. 2024
- CBR600 Engine runs and drives the boat on the road
Tiktok DKthewelder
Instagram dk_the_welder
3d print models www.cgtrader.com/dkthewelder
Clothing ,parts, tools dkthewelder.com/
Email dkthewelder@gmail.com
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/nori/powerslide
License code: JKLNE7IJB43O928R - ยานยนต์และพาหนะ
What Happens with the batman motorcycle? is done
I have blown the CDI, I am waiting on another one hopefully back running soon 👍
That is actually the best design for an amphibious vehicle I have ever seen. Putting the wheels outside of the body of the boat simplifies everything. Well done!
To be fair, it has its issues but it’s absolutely easier to access and declare issues, especially use up less space in the hull with!
this is the most New Zealand thing I have seen all week.
its good to revisit old projects with new knowledge every now and then
I believe this about my wife.
I've said it before and I'll say it again nobody makes anything cooler in a smaller shop than you has to be the smallest shop on TH-cam
I am looking at bigger sheds! But I hate building boring stuff like a shed , so I end up just putting up with the little one
@@DktheWelder 2:45 I've been welding for a long time but have never seen a sick rod in a TIG torch! You can just do that? I have a TIG welder and always wanted to modify it to do stick but can I really just jam a stick in there and reverse the polarity or is there something more to it?
@@ifabforfun haha , most arc rods can run positive earth fine , it actually works better than a normal hand piece as you get the high frequency start and you can use the downslope which is good for welding gaps 👍
@@DktheWelder that's cool, i'll have to try it sometime, thanks for the reply.
It's not the size of the shop that matters but how you use it mate.........😉😉😉
love ur edditing, your video cuts, you make it realy fun to watch XD and u have realy nice ideas to bild stuff
Transport department would love this, they could charge you two regos!
*Great comment, I was thinking the same thing* 😂😂😂
It's nice when shit still runs after sitting for a minute. Great retrofitting!
It did start reasonably easy , but there is also a lot happening off camera to get it running which is too boring to film
love the kiwi ingenuity ,keep it coming! 🤓
As small as the shop looks it’s probably even smaller in reality due to the fisheye effect lol
Couldn’t agree more about the quality of video, great content as always Man!!
Fabrication is life! Love your content. Keep following your passion.
I asked and you delivered! Thanks for reviving this old project! Can't wait to see it "complete" (as in good enough for what you wanted it for)!
gotta say your editing style is great. awesome video. thank you, I really enjoyed watching.
Possibly the coolest thing ever made.
Frankenstein say's to Mad Max, 'Yep, lets do Waterworld'!
Amazing progress on this build! I've been waiting to see this thing back in action!
using the tig rig to hold a stick electrode, a man after my own heart
Feels like Florida and Australia were once apart of each other cause Aussies and Floridians have the same creative minds. As a Floridian this is peak transportation.
Haha yes Florida does sound awesome! I am from New Zealand actually
@@DktheWelder Sorry, I was afraid I had it wrong! 😅Love the content, just found your channel.
I HAVE BEEN WAITING SO LONG FOR THIS!!!
Keep at it man, I can see you going places!
It's the Family Guy boat! It reminds me of that episode where they could get a boat or the mystery box, Peter chose the mystery box and ended up with a time share (I think?) while everyone else got boats and they're all driving around town in their new boats, just boating it up.
Really nifty design! Thanks for documenting the build :D
The 6yo in my head is running around the lounge room screaming with excitement just looking at this crazy thing !!! 😲👍🤯
New Zealand backyard mechanics blow my mind 😂
This man is a god he has combined bass boat and ATV....i will proudly follow this Man into battle and it would be my privilege to die at your side my king 👑... for Sparta 😂🤣😂
Awesome mate 🤩👍
Love the ingenuity and really great editing and video.
Your amazing 👌
I hope it goes fast on the water! About 90hp but I know how inefficient jet pumps are
coolest thing ever made. Love it.
A way to get around during disasters
I remeber this boat, It's looking much better now with this new steering set up. Amphibians are fun, it's what drew me to Argos
unreal! What a great set of skills!
Very interesting project! Be watching this for sure
Nice to see an update on this build
It is exciting to see it finally moving!
That is just awesome! Very cool man!👌
This guys wild, subscribed
That freewheel sprocket was genius
Super cool build
You made a cyberboat, So cool.
Awesome build.
Good ol' Kiwi ingenuity, gotta love it!
that lever mechanism to raise and lower the front wheel is brilliant! honestly the build of it would be a good contribution to the world. many makers like myself have uses for mechanisms like this, and although measurements will vary depending on use case / scale... the basics and considerations to make it work are invaluable. for now ill just pause the video and try to guess reverse engineer what you did. keep up the good work man.
There is an old video on my channel where I made that mechanism, about 2 years back
Great work - super cool!
The Australian Colin Furze! Love the channel!
kiwi
Yes but New Zealand 🇳🇿
That looks suitable for florida roads
What a build looking wicked
Thanks 👍
Getr done bud!
Ha ha, love it, especially the bike forks and wheel.
Amazing stuff! You need to get hold of “this old Tony”
I gotta get me a striaghtening tree....Too Funny Thx for the great idea
🐝🏁 Great video 👍
coming out awesome but i am concerned about all the weight being on one side. should really put the helm opposite the engine so you are not listing in the water.
Nice work Dan👏👏👏
Thanks 👍
Now that’s what I’m talking about way cool
I cut the heads of 17mm, or 11/16 bolts to weld onto things, allowing me the use of my sockets, and saving a trip into town 👍
that's a big ol' hell ya from Alaska -- subscribed!
miltiyear project wow
This looks awesome, subbed. :)
Utterly ridiculous! Best thing on TH-cam. Your ingenuity is second to none
nice dude, love it.
"You Rock Dude"!!! I've always wanted to put a 500 Yamaha TT engine on a zero turn Hustler mower. And race it in the Red Neck Rodeo of State Fair and Genesee county Fair Michigan. Why the hustler, because they are the lowest of all zero turns and I used one where I used to work. Stock they are hands down the fastest zero turn mowers and the easiest to operate. And the walk behind Hustler trimstar are Top Notch Too
That does sound awesome but can the pump take that much power? I had an xt600 cool motor but so hard to start
Spectacular!!
I'd like to see a crossover build with you and Marty T. I would love to see that contraption
Enjoyed that, subscribed.
Thanks for that 👍
Thats awesome! Bass Pro should hire you to design a line of these, Id buy one in a heartbeat lol!
thats pretty sweet
Glad to see I'm not the only person crazy enough to build an amphibious vehicle 😂 love it!
I just had a look at your channel, what a cool machine! Also pretty fast on the water for having non retractable wheels . Does it have a jet pump ? I will watch the build videos later
Thanks, yes I started off with a homemade prop, then found a proper prop but was getting way too much cavitation, now it's got a jet pump and it's so much better! Its still far too slow in the water though,I wish I had built the whole thing with retractable wheels like you have though! You never know I might build a new one lol
I think this guy is going to be a successful youtuber, but imagine living next to him 😂 absolute nightmare
Par for the course, brilliant,
Guys like this should be running things
Soo much fun to be had once this hits the water...
Add a mower deck and a grill for cooking fresh fish and I believe you got something there.
Tha boat is sick😊😊
g920 wheel was the cherry on top
Just found your channel & subscribed very cool content 👍🇦🇺
so nice , been my dream from the time i did see walking life boat car
Check out the next video where I try it on the water . I’m back working on it already
Motor connotates it is ELECTRIC. THAT my good sir IS a ENGINE. LOVE THIS BTW
What about weight distribution? How will you optimise it? Will there be passangers also?
This is what i like to see
Question. Why not twist the steering gear and shorten the shaft a little? Seems like it should fix the binding. Maybe not, but it seems like it would. Awesome build idea!
Awesome build man I’ll be subscribing as soon as I post this comment can’t wait to see the next one yeww
My friend God Rest his Soul. Made a half track cycle like the one in Saving Private Ryan. Then he made a collapsible ice shanty around it. It was featured in Michigan outdoors
Wow that sounds awesome haha. Was actually thinking of making my mini tank into a half track motorbike!
you should think about putting a quickener on the steering box alot of dirt track cars here stateside use them ... its an inline 2:1 box that increases the steering rate so youll have to work the wheel alot less to get a decent driving feel out of it without chasing the wheel as much
otherwise cool build man!
When the apocalypse is imminent, I want you on our team.
Does the jet run all the time or does it have some sort of clutch?
very nice.
It's satisfying to see you went with my idea to steer it, and took it to the next level. I fear though that having your bodyweight and the engine on the same side of the boat might make it list a little in the water. You may need to make it right hand drive.
I am going to have a tiller style steering for the jet pump so I can sit either side and I will likely have a passenger
All the weight is on one side though. You should move the seat over or your going to have to add a lot of ballast to the other side would be my guess.
Soo badass 👍
Awesome Boatercycle broo 🤟👽🚲🎬
Bro Boatacycle ! That sounds like the name haha
@@DktheWelder on my home planet there are many boatcycles 👽🛸
SICK! Ultra light wheels like bicycle wheels in front but X 2 ? Much lighter and stabler? 2Q 4. U. 2Q007 Aloha.😎
Giggles :) Fantastic :)
Amphibious is the most fun I had on wheels or tracks , always wanted a motorcycle powered job , have fun with that ,we used Alvin stalwarts,DuKW,s,GPA,s, GAZ49,s ,M2 bridges,weasels,schwimwagens,duttons,amphicars,and some experimental s .superb videos
Wow nice , how did you get to drive all of those?
@@DktheWelder I was in a club for ex military and assembled bikers & lunatics “ north London barmy army” we had tanks, low loaders,and an ex SAS helicopter, one of our club tee shirts read “ our drinking club has a military vehicle problem” great days
Looks like a amphibious dragcar 😃😃😃
Haha just needs a v8 and a blower!
Another mad dog idea but looks like it will be fun
Registration motorcycle or boat ? both, Yes.
Great, one more thing I need, lol.
genius.
For reverse you could maybe make something like Honda Goldwing by spinning the starter motor the other way while in gear, BMW also did that with the K1600GT
O is that how they work? I don’t think that will work for this . Once I hooked up a starter backwards on one of these motors and it just free spins as there must be a one way clutch
@@DktheWelder or use a separate starter motor for it with a sproket on it👍
what a crazy thing. Looks a little bit heavy on the port side. Can the steering, seat and driver be moved over to the right side of the engine.
I’m actually planning on swapping sides to control the jet pump , you will see in the next video
I bet this thing drives like a boat.
You went Freakin total full throttle on this one mate! You are the Gatling of shopsters!!!…ima need your address so I can move next door and come over hold your beer!
I have those exact same Crocs but I cut the straps off with a knife because they served no purpose they were just in the way.
I have a prop that is not a prop! It will power you on land or sea! I came up with it in 1986 and took it a boat prop manufacture. They told that if I developed totally they would buy it!
So cool, so dodgy and yet so awesome. :)
Any chance you can tie the jet steering into the wheel?
Apart from the crazy dirt bike front end, the whole thing is looking pretty slick. :)
I was going to do that but I am going to have a tiller for the jet pump or it would interfere when the front wheel is up
@@DktheWelder yeah, just keep it simple. That way it's easier to fix or redesign.