New Purion 200 display

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ม.ค. 2025

ความคิดเห็น • 18

  • @lewiss66
    @lewiss66 ปีที่แล้ว +1

    How is the butons sensitivity on the purion 200 ? The LED remote ones were kind of too sensitive. Thanks for the video

    • @BikeGarageUK
      @BikeGarageUK  ปีที่แล้ว +2

      The buttons feel very similar to the LED remote, suspect they are the same.

  • @frafra224
    @frafra224 ปีที่แล้ว +1

    is it possible to customize the different screens?

    • @BikeGarageUK
      @BikeGarageUK  ปีที่แล้ว +1

      You have many different screens which can be shown. The default screen shows
      (a) State of charge of eBike battery
      (b) Assistance level
      (c) Unit of speed indicator
      (d) Your performance
      (e) Speed
      (f) Drive power
      You can view other screens by pressing the or buttons.
      The following additional screens are available for you to
      view:
      - Status screen: The status of the connected devices is
      shown here.
      - Distances screen
      - Rides screen
      - Range screen
      - eBike battery screen
      - Power screen
      - Cadence screen
      - Total distances screen
      - ABS screen (optional)

    • @frafra224
      @frafra224 ปีที่แล้ว

      @@BikeGarageUK Yeah I want to see battery+time+speed+assist level in the same screen but I dont think it's possible. They should keep the LED indicator to show battery level like the displayless remote control.

    • @BikeGarageUK
      @BikeGarageUK  ปีที่แล้ว +2

      @@frafra224 I think you can get 3/4 of those.

    • @zjedinite
      @zjedinite 10 หลายเดือนก่อน

      How about heart rate? I now use my iPhone for the screen and Apple Watch for HR.
      So hopping I can loose the big phone to monitor my heart with this little unit.
      Great short review BTW 🤙🏽

  • @JJMTB_UK
    @JJMTB_UK ปีที่แล้ว +1

    Hey Buddy how did you replace the led controller with the purion 200 in the ebike flow app?
    Thanks

    • @BikeGarageUK
      @BikeGarageUK  ปีที่แล้ว +2

      Once the new display was fitted and programmed via the diagnostic software it automatically recognises it in the flow app.

    • @RobHill00
      @RobHill00 ปีที่แล้ว

      So you have to take it to a Bosch dealer to get it to work, it’s not just plug and play?

    • @JJMTB_UK
      @JJMTB_UK ปีที่แล้ว +1

      @@RobHill00 no dealer required, plug and play. Had to uninstall bosch app and reinstall and when it ran through setup it picked the new purion up no issue.

    • @BikeGarageUK
      @BikeGarageUK  ปีที่แล้ว +1

      Just plug it in and make sure it's updated on the app.

    • @Emtbtoday
      @Emtbtoday 8 หลายเดือนก่อน

      When you get your purion 200 update the app from phone only do not update from purion 200 itself or will start to show error message update the app before the install you'll be good to avoid a diagnostic pairing with the new April 24 update

  • @camperp195
    @camperp195 ปีที่แล้ว +1

    I like this,BUT,if you have kiox 300 ( like i have) you cannot use navigation as you rightly say,its minimal and bypasses the main kiox screen,(i use mine with komoot)
    Or can you still use navigation with the tiny screen?
    If you can,id buy one,and lose my kiox screen

    • @BikeGarageUK
      @BikeGarageUK  ปีที่แล้ว +1

      No navigation, it's not large enough for that.

  • @MrHaihui
    @MrHaihui 5 หลายเดือนก่อน

    Hi, please let me know how I can change the language from German to English. Thanks!

    • @BikeGarageUK
      @BikeGarageUK  5 หลายเดือนก่อน

      @@MrHaihui On the display you can easily change the language. Via the setting then my purion menu.

    • @MrHaihui
      @MrHaihui 5 หลายเดือนก่อน +1

      @@BikeGarageUK I have finally succeed, but if I'll try to do it again, I'm not so sure...