Visit our new online shop www.gpufix.de If you need parts for your projects. Take the benefit of the promo code "welcome10" with which you will get 10% discount on your first order.
I am baffled. It says difficulty 3/10. I have a repair shop in germany so i was expecting that i could have done this, because i probably rank among the top repair shops soldering wise in my city. I neither have the memory test nor have i found anything online, I personally dont think desoldering, reballing (in this case replacing one) and soldering 4 memory chips on the same gpu should be a 3/10. I know i still have a lot to learn and I hope can get better from watching your videos, but neither I nor any repair shop in my city has a memory rework station so this repair would have been complicated or even impossible for me or any other shop in my city to do. And then its a 3/10 according to you xD Keep up the good work, i hope i'll become better and maybe then I can apply for a job at Krisfix.
Thank you The difficulty rating is a very relative value dependent entirely on your view of the problem. We have done this exact repair on this model over 900 times. Maybe on the first repairs it was a 10/10, but with time and experience things look easy
So these support brackets really are not optional nowadays. I feel that the current PCIe form factor for GPUs has come to an end. We need to be able to vertically mount our GPUs without blocking access to the other slots on the board.
One roadblock is that it sag only affects heavy GPUs and horizontal GPUs, which are both only present in consumer GPUs. Intel's ATX & PCI-SIG don't bother to change, as in the enterprise / datacenter, all GPUs used vertically and that's where all the money is these days. :( I think the "cheap" solution is adding GPU support brackets directly to cases (and not bothering with the PCIe slots at all). Lian-Li's GB001/GB002 are a good step forward, as these support brackets directly attach to motherboard standoffs.
I'm so happy I went with a vertical orientated card this time around.. I didn't even know anything about these problems, I just wanted a new look. (Inverted Case FTW)
My 6950XT was hanging on the slot because I can't fit the support bracket due to the 3 power connectors and the massive CPU air cooler I have so I glued a plastic cube to the drive bay of my box and it does the job. Definitely important on these massive cards and I hope a few weeks without support didn't start to damage mine.
@@KrisFixGermany So basically if I have it it's a ticking time bomb or if I'm lucky I don't have it and I'm good. Well now you got me sweating. At least I know a guy that does skillful GPU repair in case I have the need lol.
@@sk-sm9sh When I opened my GPU for a repaste I was pleasantly surprised to see that the memory chips closest to the PCI slot are glued in additionally. PowerColor probably knew this was an issue and made sure to glue them as hard as possible.
@@nasko235679 No amount of glue will ever help with GPU sag. I've seen people who built their PC themselves to save a few euros but didn't think that the support bracket was there for a good reason so they lost an expensive GPU. Actually not lost but.. you know what I mean.
This is why it's so important to have your GPU have proper mounting support, i have a Sapphire Nitro Vapor-X 7900XTX and that card is heavy and huge, so i bought adjustable mount holders and placed 8 of them all over the card from the bottom, symmetrically around the card touching the bottom of the case so the card's weight is mostly supported by these and not anything else (of course it's screwed with all 3 screws already anyway), it's extremely straightly aligned. If you pay for GPU these days with these extremely high prices yet you neglect to buy a 1 euro part to keep it safe then you don't really deserve a GPU of such class to begin with in my opinion cause you end up with like this.
new sub, first and foremost your channel is so satisfying to watch. You are a master at this and all your machines are so cool. Second I just bought a little bracket to prevent gpu sag lol
glad i watched this video, i mount mine vertically so im not worried about this sort of issue but my back up PC i will change that case to limit issues in the future. i wish i had known about your channel about 2 years ago i have a dead GPU on a 295x2 card works fine on the other GPU but its not as fast as the other 295x2 card i have as a result of this. might be an old card but still plays all games today even if i cant find drivers games run and play well enough
Meine 6900xt hat sich heute aus dem nichts getoastet mit den gleichen Symptomen. Danke, jetzt hab ich hoffnung und werd die karte die tage bei euch vorbeischicken :)
Great video even though I don't do electronic repairs, but I like the content. Question: When you sprinkled the tiny solder balls, how did you place the chip to be reballed without them falling?
Mine was letting out smoke while playing in VR but as soon as I smelled it, my PC already shut off and refused to turn back on. I installed a 1660 super into the PC and it works again but my 6900XT smells really badly burned and I don’t know what to do, especially since I need this PC later today…
Hi Mr Theodore, good job! I am still saving money for the machine :P whats your preferable choice between 6950,6900,6800 considering common problems you encountered? thank you.
@@KrisFixGermany that is quite a piece of kit and for a shop like yours it is absolutely CHEAP I am a heavy truck / Lorry mechanic and use a LOT of tools that are MORE EXPENSIVE then that thing
Isn’t this a faulty design from AMD? Customers can’t be expected to know that the memory chips get damaged, most other GPUs work just fine even when slightly bend. Although I am glad your shop exists, I am wondering how did you get so many RX 6XXX gpus? Shouldn’t they be under warranty? Were most of the cards bought directly from AMD and second hand owners couldn’t claim a warranty repair? So many questions… still thanks for repairing my card. I am contacting AMD directly and see if they will replace it. If not, maybe my university has tools good enough so I can reseat the memory myself. I guess you can’t/won’t tell us where you get the memory test software from?
If you begin with "perhaps" you should most definitely not do it yourself. You think it's easy and once you've seen it on TH-cam you can do it yourself because it seems to be easily done? You will lose your card forever. Think about this: how easy it looks to ride a bicycle? How easy it actually is before you learn the skill? There's no way you can do it first time, right?
Hi Bro, Im from Brazil, and I working repair graphics cards, can u share this software for testing Vram on AMD series RX 6xxx? I have some but every time I try to boot, grub returns failed as code 13 on unbuntu.
Can you please guide us through how to test notebook gpu's with nvidia mods/mats? Can't seem to figure out why but i've not been able to test my gtx1050 on the notebook.
moin, ich habe mir vor etwa 1 1/2 jahren eine ASUS TUF GAMING RX6900 XT OC geholt und seit etwa 3 monaten bekomme ich beim zocken im Quality mode schwere DX fehler und im Performance mode einen absturz wobei der pc einen neustart versucht. ich hatte zuerst den verdacht das es am mainbord liegt aber dem ist nicht so, dann dachte ich es wäre das netzteil und das war es auch nicht da ich beide komponenten ausgetauscht habe, CPU, RAM und M.2 sind auch neu. Die Graka habe ich noch nie auseinander gebaut wegen Garantie. meine aktuelle Hardwae: R7 5700X Thermaltake UX200 luftkühler MSI ROG STRIX B550-F GAMING G.SKILL 32GB 3600MHz CL16 M.2 T-FORCE Cardea A440 2T R/W 7000/6900 MB/s NETZTEIL GIGABYTE AORUS P850W 80+ GOLD vollmodular Custom Gehäuse eigenbau Holzund Metall meine frage "was kann ich machen oder was sollte ich machen?"
Visit our new online shop www.gpufix.de If you need parts for your projects.
Take the benefit of the promo code "welcome10" with which you will get 10% discount on your first order.
Truly a master at his work. Well done.
I am baffled.
It says difficulty 3/10. I have a repair shop in germany so i was expecting that i could have done this, because i probably rank among the top repair shops soldering wise in my city. I neither have the memory test nor have i found anything online, I personally dont think desoldering, reballing (in this case replacing one) and soldering 4 memory chips on the same gpu should be a 3/10.
I know i still have a lot to learn and I hope can get better from watching your videos, but neither I nor any repair shop in my city has a memory rework station so this repair would have been complicated or even impossible for me or any other shop in my city to do.
And then its a 3/10 according to you xD
Keep up the good work, i hope i'll become better and maybe then I can apply for a job at Krisfix.
Thank you
The difficulty rating is a very relative value dependent entirely on your view of the problem. We have done this exact repair on this model over 900 times. Maybe on the first repairs it was a 10/10, but with time and experience things look easy
What a great and hones review!
And what an absurd number of repairs of just this card! Absolutely insane!
So these support brackets really are not optional nowadays. I feel that the current PCIe form factor for GPUs has come to an end. We need to be able to vertically mount our GPUs without blocking access to the other slots on the board.
One roadblock is that it sag only affects heavy GPUs and horizontal GPUs, which are both only present in consumer GPUs. Intel's ATX & PCI-SIG don't bother to change, as in the enterprise / datacenter, all GPUs used vertically and that's where all the money is these days. :(
I think the "cheap" solution is adding GPU support brackets directly to cases (and not bothering with the PCIe slots at all). Lian-Li's GB001/GB002 are a good step forward, as these support brackets directly attach to motherboard standoffs.
I'm so happy I went with a vertical orientated card this time around.. I didn't even know anything about these problems, I just wanted a new look. (Inverted Case FTW)
Vertical is the best way to go
Good evening. Great job and professional as usual. Shooting of rework station working on memory chips is simply ... amazing! Regards from Italy.
I don't know a more safe way to work with BGA components :)
My 6950XT was hanging on the slot because I can't fit the support bracket due to the 3 power connectors and the massive CPU air cooler I have so I glued a plastic cube to the drive bay of my box and it does the job. Definitely important on these massive cards and I hope a few weeks without support didn't start to damage mine.
It often takes seconds, not weeks, to get to a problem like this
@@KrisFixGermany So basically if I have it it's a ticking time bomb or if I'm lucky I don't have it and I'm good. Well now you got me sweating. At least I know a guy that does skillful GPU repair in case I have the need lol.
@@nasko235679 it might be fine until you decide to move pc or bump it by accident and then snap.
@@sk-sm9sh When I opened my GPU for a repaste I was pleasantly surprised to see that the memory chips closest to the PCI slot are glued in additionally. PowerColor probably knew this was an issue and made sure to glue them as hard as possible.
@@nasko235679 No amount of glue will ever help with GPU sag. I've seen people who built their PC themselves to save a few euros but didn't think that the support bracket was there for a good reason so they lost an expensive GPU.
Actually not lost but.. you know what I mean.
There's nothing more satisfied more than watching your videos loveing the content
After watching your video, I bought a GPU holder to protect my brand new RX6900XT from gravity. Thank you ! :-)
but it will not protect your gpu from being poor engineered gpu card ( so called asshole design) and planned obsolence :-)
Where did you get one from? :)
This is why it's so important to have your GPU have proper mounting support, i have a Sapphire Nitro Vapor-X 7900XTX and that card is heavy and huge, so i bought adjustable mount holders and placed 8 of them all over the card from the bottom, symmetrically around the card touching the bottom of the case so the card's weight is mostly supported by these and not anything else (of course it's screwed with all 3 screws already anyway), it's extremely straightly aligned.
If you pay for GPU these days with these extremely high prices yet you neglect to buy a 1 euro part to keep it safe then you don't really deserve a GPU of such class to begin with in my opinion cause you end up with like this.
new sub, first and foremost your channel is so satisfying to watch. You are a master at this and all your machines are so cool. Second I just bought a little bracket to prevent gpu sag lol
Отличное видео коллега))
support bracket was the first item I ordered after purchasing my 6800xt will make selling easier in the future
for modern cards is a must
I’ve ordered a Coolermaster ARGB bracket for my Asus TUF RX6950XT after watching these videos.Not risking a broken card😅
very very professional , perfect and satisfying kris ... thanks
what was the software that you use for diagnose the vrams?
Looks like it is called vgatest it's for linux
glad i watched this video, i mount mine vertically so im not worried about this sort of issue but my back up PC i will change that case to limit issues in the future.
i wish i had known about your channel about 2 years ago i have a dead GPU on a 295x2 card works fine on the other GPU but its not as fast as the other 295x2 card i have as a result of this. might be an old card but still plays all games today even if i cant find drivers games run and play well enough
Meine 6900xt hat sich heute aus dem nichts getoastet mit den gleichen Symptomen. Danke, jetzt hab ich hoffnung und werd die karte die tage bei euch vorbeischicken :)
I have a XFX 6950XT. I don't know if I run the same risk but I'll definitely keep it in mind
Nice job... 👍 And as always teaser involving some new tools for testing 😂
Great video even though I don't do electronic repairs, but I like the content.
Question: When you sprinkled the tiny solder balls, how did you place the chip to be reballed without them falling?
Never mind, I watched another video of yours and I found out.
Where i can find the software to test the card? I have a powercolor 6800xt redevil that has memory problems!
what software do you use to diagnose the memory? this is not the Tserver, which is it?
Mine was letting out smoke while playing in VR but as soon as I smelled it, my PC already shut off and refused to turn back on. I installed a 1660 super into the PC and it works again but my 6900XT smells really badly burned and I don’t know what to do, especially since I need this PC later today…
This is next level.
Good job Bro 👍
Hi all,
What software is being used to test the memory in this video?
Hi.
Cannot you repair broken pads on RAM chips? Maybe using a dremel tool to expose copper leftovers?
Nice video!
Hello Kris.
Where can I find this software?
Regards
sir kris what apps you using for mem test, thanks in advance
Nice job 👍👍
Hi Mr Theodore, good job! I am still saving money for the machine :P whats your preferable choice between 6950,6900,6800 considering common problems you encountered? thank you.
They are all good
I tell this to every PC builder: "Don't let you card sag!" Some of them told me that i'm stupid that it does not matter.
Hello Kris, what's that rework station u're using to remove memory chips
WDS 620
@@KrisFixGermany that is quite a piece of kit and for a shop like yours it is absolutely CHEAP
I am a heavy truck / Lorry mechanic and use a LOT of tools that are MORE EXPENSIVE then that thing
Great video thanx
Isn’t this a faulty design from AMD? Customers can’t be expected to know that the memory chips get damaged, most other GPUs work just fine even when slightly bend. Although I am glad your shop exists, I am wondering how did you get so many RX 6XXX gpus? Shouldn’t they be under warranty? Were most of the cards bought directly from AMD and second hand owners couldn’t claim a warranty repair? So many questions… still thanks for repairing my card. I am contacting AMD directly and see if they will replace it. If not, maybe my university has tools good enough so I can reseat the memory myself. I guess you can’t/won’t tell us where you get the memory test software from?
It's a pretty old and familiar problem, but manufacturers just haven't learned or don't want to
If you begin with "perhaps" you should most definitely not do it yourself. You think it's easy and once you've seen it on TH-cam you can do it yourself because it seems to be easily done?
You will lose your card forever.
Think about this: how easy it looks to ride a bicycle? How easy it actually is before you learn the skill? There's no way you can do it first time, right?
Are those custom reballing jigs?
Yes
Can u link this program what u are running for test mem
Meine 6900XT ist heute nach fast 3 Jahren verreckt. Schätze ich werde euch die mal zuschicken. Sieht alles sehr ordentlich was ihr macht.
Hi Bro, Im from Brazil, and I working repair graphics cards, can u share this software for testing Vram on AMD series RX 6xxx?
I have some but every time I try to boot, grub returns failed as code 13 on unbuntu.
Awesome video
Share this tool please!
How do you add the yellow thing in the top right to your video
Great work
Can you please guide us through how to test notebook gpu's with nvidia mods/mats? Can't seem to figure out why but i've not been able to test my gtx1050 on the notebook.
Hello. From what source did you get soft for amd cards?
Is it better to mount the card vertically or as long as you have a GPU support bracket is that enough?
Vertical is always better
what is the type and size of gpu rx 6900 xt screws?
Is the rx 6600 considered heavy to need support?
My 6900 the same problem no video :c any reference cost for repair?
what soldering machine is tha?
💯👍👍👍👍👍
Can you please tell the name of the software used for finding which memory banks are bad.
Thank you.
moin, ich habe mir vor etwa 1 1/2 jahren eine ASUS TUF GAMING RX6900 XT OC geholt und seit etwa 3 monaten bekomme ich beim zocken im Quality mode schwere DX fehler und im Performance mode einen absturz wobei der pc einen neustart versucht.
ich hatte zuerst den verdacht das es am mainbord liegt aber dem ist nicht so, dann dachte ich es wäre das netzteil und das war es auch nicht da ich beide komponenten ausgetauscht habe, CPU, RAM und M.2 sind auch neu.
Die Graka habe ich noch nie auseinander gebaut wegen Garantie.
meine aktuelle Hardwae:
R7 5700X
Thermaltake UX200 luftkühler
MSI ROG STRIX B550-F GAMING
G.SKILL 32GB 3600MHz CL16
M.2 T-FORCE Cardea A440 2T R/W 7000/6900 MB/s
NETZTEIL GIGABYTE AORUS P850W 80+ GOLD vollmodular
Custom Gehäuse eigenbau Holzund Metall
meine frage "was kann ich machen oder was sollte ich machen?"
Is it difficult to go between German and English letters? I’d constantly have to think about it lol.
whats the price of this repair?
How much is a repair like this?
Man I wanna be a computer doctor
God of gpus
Only thing to point out that the ram slots should have being alot closer to the gpu slot to prevent ram modules from breaking traces
If I wanted your company to fix this problem for me, how much would it be?
Супер
something sketchy at at 9:48 it says R68XT witch is reffering to a 6800xt? but shows R69XT at 9:40 ? so u dident fix the 6900xt
That's just a folder name for the test he's using. 6800 XT, 6900 XT and 6950 XT all use the Navi21 GPU anyway.
plug it in and show it working
Класс)
Please can you share this script
I have laying around 6900 xt xfx from long time i am sure it has memory fault not dead completely
9 Months is a long time to be away. Going to unsubscribe for now.