I saw someone make a quick cheat for it. Write F L E on a sheet of paper, then under it, align the numbers 1 2 3. The way to read it is 1st class has the letter F in the middle for fulcrum. The 2nd class has the Lever in the middle. The 3rd class has the effort in the middle. FLE=123 tells you which class and what’s in the middle!
A hammer can be used as all three depending on application. 1st class when pulling a nail, 2nd class when rip-clawing a board, and 3rd when driving a nail.
Yes, he must be a physics professor like me. We are always wrong, but that's what's so right about us. That's a joke by the way for those over-sensitive people out there.
Thanks Sir i am in class 9 , you explained it to me on an Extreame Basic Fundamental level about The worrking and differences between classes of levers , i am preparing for JEE Advanced , where your bacis and Concepts should be Extreamly and crystal clear . Thanks a lot as it helps me in Solving Extreamly Advanced level questions . Thanks
Well that's to the failure point. How ever as a mechanic I can say with certainty depending on the door jamb that the striker will move if the person is heavy enough. Sometimes they need a bit of tweaking and they make a tool that grabs the striker and will allow it to move. I will say I don't have this step to examine and try out so that leaves wiggle room for error but unless it's loading parallel to it's mount it will flex the steel the striker is mounted in even tho it's generally double and sometimes triple layered but that's only around the striker. This step looks like it touches the jamb bellow the striker and more than likely any layering inside and the weight is supported out at the end of a striker. That's basically a 3rd class lever, given proper weight it will bend the jamb. Strikers are tough as hell but not the door jamb which any firefighter using jaws of life will tell you is where to cut not the striker.
When would it actually be preferable to use a second class lever rather than one of the other two classes? I can see why a 3rd class lever would be better to use for a task - a good example being tongs, where you want to control a fine movement which might be difficult with your over powerful and clumsy hand.
Sorry for any confusion. I had the arrows in the direction that the force is acting on the load. As a result I created a new video, and added a nice mnemonic device to help memorize the different types. th-cam.com/video/fzljPiPy9nw/w-d-xo.html
This video is wrong - All the arrows for "Load" are backwards! The arrows for "Load" should indicate the direction of resistance, which the "Effort" is counteracting.
I saw someone make a quick cheat for it. Write F L E on a sheet of paper, then under it, align the numbers 1 2 3.
The way to read it is 1st class has the letter F in the middle for fulcrum. The 2nd class has the Lever in the middle. The 3rd class has the effort in the middle.
FLE=123 tells you which class and what’s in the middle!
Thanks
A hammer can be used as all three depending on application. 1st class when pulling a nail, 2nd class when rip-clawing a board, and 3rd when driving a nail.
The last picture says 2nd class but a hammer is a 3rd class lever. Other wise great video!!! Very easy to understand
depends on if you swing it or use it to pull a nail if you use it to pull a nail its a 2nd class if u use it to hit a nail its 3rd class.
but you are right he was swinging it so it was 3rd class
Yes, he must be a physics professor like me. We are always wrong, but that's what's so right about us. That's a joke by the way for those over-sensitive people out there.
Thanks for the feedback. A hammer is a 3rd class lever, I just labeled it wrong and didn't notice this.
@@Mewtube1 f
You just helped us get a school project done! Thanks
hammer is not 2nd class lever .. it is 1st class lever . please check once
Who had too watch for school
me
Me toooo
You are trash
Sicko gaming I know 😢😭
Me
Thank god you are not a ded channel and upload till this date cause this helped me
Thanks Sir i am in class 9 , you explained it to me on an Extreame Basic Fundamental level about The worrking and differences between classes of levers , i am preparing for JEE Advanced , where your bacis and Concepts should be Extreamly and crystal clear . Thanks a lot as it helps me in Solving Extreamly Advanced level questions . Thanks
It's my pleasure
@@MooMooMath O my God , you replied . Thank you so much, I got a reply from a great teacher with 200k youtube subs . Thanks Sir
@@SauravMishra007 cringe
@@gryfgryf1562 this was 3 months ago , you poor kid with a name like that... 1 subscriber 😂
@@103A_9b lol this might be 6 months ago but maybe ur the kid?
Almost screwed me up on my test saying the hammer is a second class leveler!
@Aarav Iyer They said leverler not leverer- also why u replying to a comment that was 4 months only. See mine was only 2 months.
@Aarav Iyer جميل ل جءخخقهىهءهىءي نءمقغقنثفدض1
@SCARR it's also beside the point that there is a confusing typo in the vid ^-^ All love. but beside the point ;)
No hammer is a First-class lever
Great video easy to follow. Need to change letter head of hammer to Class 3. Showing as class 2. Thanks,
Why is the load pointed up? Wouldn’t it be weighing down so the arrows pointed down?
Thank you very much bro I am not going to be confused now on first, second and third class leaver.Again thank you bro❤️❤️👍👍.
Thanks for stopping by MooMooMath and Science. You may enjoy-10 Facts about levers
www.moomoomathblog.com/2020/01/10-facts-about-levers.html
Well that's to the failure point. How ever as a mechanic I can say with certainty depending on the door jamb that the striker will move if the person is heavy enough. Sometimes they need a bit of tweaking and they make a tool that grabs the striker and will allow it to move. I will say I don't have this step to examine and try out so that leaves wiggle room for error but unless it's loading parallel to it's mount it will flex the steel the striker is mounted in even tho it's generally double and sometimes triple layered but that's only around the striker. This step looks like it touches the jamb bellow the striker and more than likely any layering inside and the weight is supported out at the end of a striker. That's basically a 3rd class lever, given proper weight it will bend the jamb. Strikers are tough as hell but not the door jamb which any firefighter using jaws of life will tell you is where to cut not the striker.
When would it actually be preferable to use a second class lever rather than one of the other two classes? I can see why a 3rd class lever would be better to use for a task - a good example being tongs, where you want to control a fine movement which might be difficult with your over powerful and clumsy hand.
Wow, it's helpful.
1nd 2rd 3th 4rd 5st
Very informative
Thank you very much i hope it will surely helps in my exams
Best explanation
Good Explanation loved it 🙂 👍👌
No wonder our calves seem to be stronger than our quads. Calf raises are 2nd class lever movements and squats are 3rd class lever movements.
Thank you very helpful
I love levers! they level the playing fields in life ;)
Thanks for this I’m too lazy to look at the textbook
Hi how do i answer this question 4. Write a statement comparing the advantages of Class 1, Class 2, and Class 3 levers.
Good
Thank you!
The arrows showing the force direction are surely incorrect? the load would oppose the effort surely?
thanks good information
❤❤❤❤🎉well done!
Thank you sir 😊
good short video
Thank you sir
OP- Overpowered
you have your 2nd and 3d class levers mixed up. In a second class level, the load arrow should be facing downward
Sorry for any confusion. I had the arrows in the direction that the force is acting on the load. As a result I created a new video, and added a nice mnemonic device to help memorize the different types.
th-cam.com/video/fzljPiPy9nw/w-d-xo.html
Thanks 😊
I watched this at school.
What the hell are u doing here?
@@Gurman-k1l watching it ?
Why are u commenting
Tq...I'm prepared for my first level exam this month 💪
Ty :)
Nice
Huge shout out to moomoo math and science
This is how many times he said force and levers
I
I
V
So none? :)
stapler is an example for 3rd class leveler
Thank u 💕
Exuse me,I think you messed up ham,er which is third class for second class.if you could see this comment and reply I would be grateful. Thank you.
You put the direction of the load in the wrong way tho cause its supposed to oppose the effort
POV your teacher give this as a lesson 😂😂😂😂😂😂😂😂
A stapler is 3rd class lever
Please send me more
This video is wrong - All the arrows for "Load" are backwards!
The arrows for "Load" should indicate the direction of resistance, which the "Effort" is counteracting.
GoodGoodGoodGood
Thanks u🥰
The moo man
hammer is third class but other than that that vid is good.
It was not so good it wasn’t interesting
🤮🤮
Dude
????
GoodGoodGoodGoodGoodGoodGoodGood
Isendoorn
Ha vai geetanjali vale kitne hai yha 🌝
Job
Fazoool
Anyone studying this for Military ASVAB??
How many people are watching this for DT work?
|
V
Pagal😂😂😂😂😂
not me so shut the fuck you ya gremlin
@@aadithyaabaskar7250 why are u being so rude for ?
hello :)
Nothing is good
Free fire lover
this is boring
Good
Good
Good