You pay the 100 bucks and take what you get,,kenwood,icom,yaesu and all the professional established brands are alwau going to be miles ahead in performance and quality.
Nice video. I have the very same one. But I cannot transmit fully in any band. I would like to transmit and receive on 400 - 480 Mhz and 136 - 174 MHz. Is this possible.
@@0504328 hindi pwede sir. crossband lang talaga. meron ako nito Mini at yung hindi mini. pero okay naman performance. :) bumili ako cignus mini may bagong version nito colored yung screen.
dont buy it. panget rx, tx low pow 3W high 20W, plus filters rx issue, daming splotter! my advise. look for another base. sa akin sira na yung speaker, no audio, plus kung tx ka, may delay naka pindot kana, 2secs pa rereact yung rdo
For the unwanted splats try mo program yung carrier squelch nya, merong frequencies talaga na mataas yung noise, makikita mo sa spectrum pag gumamit ka nang sdr. I believe merong crossband repeater capability yung cg828 mini at cg828.
meron ako nito, problem ko merong naka display na x sa lower display , di ako maka transmit, ano kaya possible problem, any advice for the programming or kaya ito tanggalin using the menu
Ayun Problem solved duon po sa may issue dito regarding sa Lock icon sa mga channel na lumalabas. Simple lang solution factory reset lang po para bumalik sa dati at mawala yung icon lock sa channel na biglang lumabas
Marc B tx will bring about 18w, mga 30mins continous used, umiinit na radio, received ok sya, kaso meron QRM or splotter depende sa freq, for a china rdo i will give a 3 out of 5.
@Dennis Inocencio based po sa eperience ko sa 828mini ok naman po ang audio po..... Pero syempre if may budget mas ok po kung 828UV na lang po ang kunin. Pero kung budgeted lang eh ok naman si mini po. #imho
mga kaibigan hingi ako ng opinion niyo may antenna po ako cignus cp22 v vhf gamit ko baofeng uv5r tapos gin try namin mahina ang signal niya 3km un receiver uv5r gamit, both uhf at vhf same un result mahina mas malakas pa un stock to stock...
baofeng radios are not reliable to be made as portabased, they are only good for short distances, but you also have to look at the technical side, which is your cable losses, SWR and battery power when you run test. or propagation. the radio runs good with 7.4V at 4.5W, the less your battery power it may go less like 3W or 2.5W.
You pay the 100 bucks and take what you get,,kenwood,icom,yaesu and all the professional established brands are alwau going to be miles ahead in performance and quality.
I agree completely.
I Paulo. Got the changes for the bandwidth extension? Do you know how to wire the cable?
Nice video. I have the very same one. But I cannot transmit fully in any band. I would like to transmit and receive on 400 - 480 Mhz and 136 - 174 MHz. Is this possible.
think its only up to 450.000 UHF and 174.00 VHF
Sir how to remove x in the upper part of the screen MINI CG 828..Tnx
im inspired with your video bro, i remember my hobby way back on the 90s, now radio's is so much improvement im thinking to buy new one
There's repeater mode relay. Go to set. Find relay sw. Then go back to function. Makikita mo yung Relay - U-Rx to V-Tx. Then Switch On Relay Sw.
Pwede po V to V or U to U?
@@0504328 hindi pwede sir. crossband lang talaga. meron ako nito Mini at yung hindi mini. pero okay naman performance. :) bumili ako cignus mini may bagong version nito colored yung screen.
@@cipher2702 wala na po, tinanggal na nila. ung CG828 UV nalang meron. ung 9k+
@@cipher2702 Tinanggal sigur ni cignus ung sa mini para siguro ma benta ung UV nila ung malaki hehehe.
How to delete a channel and remove lock sign next to channel that you want to delete on Cignus 828 mini? TIA 73
Same issue how?
How to delete lock sign
Nice review po, we have the same sets of radio, TM-281A and CG-828 mini.
Any tx rx video?
Sir pano kayo nag repin? Medyo loose nga ung ptt mic ng mini.
Any new update sa unit?
Sa mini may Mute ba? May transmit pero wala ako naririnig
Bro, 10-20 nimo? i have seen an ARGAO channel in your band. from Argao here.. btw u need to activate the repeater mode of that unit
Sir Paulo can you do a RX and TX video?? Im planning to buy one, it would really help me to decide. Tnx
dont buy it. panget rx, tx low pow 3W high 20W, plus filters rx issue, daming splotter! my advise. look for another base. sa akin sira na yung speaker, no audio, plus kung tx ka, may delay naka pindot kana, 2secs pa rereact yung rdo
Anyone an idea to activate 1750Hz tone? Thanks !!
For the unwanted splats try mo program yung carrier squelch nya, merong frequencies talaga na mataas yung noise, makikita mo sa spectrum pag gumamit ka nang sdr. I believe merong crossband repeater capability yung cg828 mini at cg828.
Meron yan
Ung bagong model wala na.
May pc software na ba to ska programming cable?
sir, i have seen in ur rdo one of ur channels in alphanumeric is ARGAO, what freq are ur saving in ur rdo, 145.270?
Anung size and kind ng screw nya for the rack?
same lang sa tm 281A
wala ba ulet ireview na radio OM Paulo :) Have a great day! Good share
hindi po ba mg loko ung rj jack niya, kc sakin minsan hidi mka transmit minsan hini lalabas ung signal bars pg mg transmit.. ano kaya maganda solusyun
aside from.cignus. ano po ibang brand ma recommend na the same.sa budget and features sir
anytone or cignus 828UV.
oy kuya... naa diay ka ana?
meron ako nito, problem ko merong naka display na x sa lower display , di ako maka transmit, ano kaya possible problem, any advice for the programming or kaya ito tanggalin using the menu
yan ang defect nya, dapat wait ka for 2 sec before ka mag tx,
Same issue how to solve this?
@@paulocblanco78 may paraan ba para mawala sya at bkt sya lumalabas. Help. Pls
Na solve nyo na po ba ang problem na ganto??? Same issue po tayo nag ka meron din ng lock icon saakin
@@markjeffersoncapacia5167 sabi friend ko relay issue yan, so pa check mo technician or benta mo nalng bili ka ng ibang brand
Issue ng cygnus mini.. may x ang line 1...
Help, paano matanggal yung lock icon sa channel ndi sya keypad lock. Lock icon na naka display sa Channel
Ayun Problem solved duon po sa may issue dito regarding sa Lock icon sa mga channel na lumalabas. Simple lang solution factory reset lang po para bumalik sa dati at mawala yung icon lock sa channel na biglang lumabas
may crossband repeat function ba itong mini na to tulad ng cg-828 na 50watt?
yes
paulo blanco, sir, san po ba sa menu makikita ang repeat funtion? pwede ka bang gumawa ng short vedio how to activate xrpt sa cg838 mini?
Sir Paulo pwede po bang lagyan ng susi like dcs during RPT function?
Sir nakabit mo na po ba sa vehicle using cigarette lighte chord?
wag must be direct sa Battery.
Sir good day. Any feedback sa TX and RX? Sa vid ang naging prob lang is splatter at yung pagkacrimp? Big tango po. 73
Mlkas sumagap kung mlkas sa splater.anyway pdi nman calibrate ung rx nya ng mga expert
small handy cute rig OM Paulo
may pc software po ba nito para sa programming , baka sa software pwedeng iprogarm ang crossband
jhonny maka local cignus dealer said, meron but not release yet. they said you can used cg828 i have not tried yet.
meron to crossband repeater?
yes po
Boss pano po ma setup ung crossband repeat? Slamat poh
Hi! Pwede na ba ang 15amp power supply para magamit yan or 20amp dapat? Thanks!
pwede kahit 10amps, i tested it sa dummy load, high power 18W lang.
Salamat sa reply bro.
Boss, kamusta naman po pala tx okay naman po ba bumato? and rx po niya?
Marc B tx will bring about 18w, mga 30mins continous used, umiinit na radio, received ok sya, kaso meron QRM or splotter depende sa freq, for a china rdo i will give a 3 out of 5.
Hi sir, user din po ako ng Cg828mini.... ok na ok po sya, actually nagawa ko po syang Base Repeater po.... ayos na ayos po sya sir.
nka encode ka ng duplex freq ba bro? nag mention mn gd si paolo na hndi nya ngamit using repeater
Sir mejo mahina nga lang yung audio nya kapag naka relay mode urx to vtx
@Dennis Inocencio based po sa eperience ko sa 828mini ok naman po ang audio po..... Pero syempre if may budget mas ok po kung 828UV na lang po ang kunin. Pero kung budgeted lang eh ok naman si mini po. #imho
Sir yung mini 828 ko, may x sa isang diplay ko ,banda sa signal. Paano po yan mawala, kasi di ko magamit, any idea kayo
@@gametubeauto3643 same issue na solve mo na ba ito. Help. Please
nasubukan ko na yung repeater mode nya one way lang sya you have to choose kung uv or vu
paano?
go to parameter select repeat sw then select on. then go to relay select on. then go to relay mode select u rx--v tx or v rx-- u tx then ok na sya
cant find relay broder? please help
pag na on mo na yung repeater sw go back sa vfo then press menu and select relay
thank kita ko na. na try ko. ang haba ng delay
mga kaibigan hingi ako ng opinion niyo may antenna po ako cignus cp22 v vhf gamit ko baofeng uv5r tapos gin try namin mahina ang signal niya 3km un receiver uv5r gamit, both uhf at vhf same un result mahina mas malakas pa un stock to stock...
baofeng radios are not reliable to be made as portabased, they are only good for short distances, but you also have to look at the technical side, which is your cable losses, SWR and battery power when you run test. or propagation. the radio runs good with 7.4V at 4.5W, the less your battery power it may go less like 3W or 2.5W.
Seem's like in Production .... their Q&A sucks actually .....
😠ok pa yong baofeng or wouxun redio nila