A few are complaining about the price point. This is literally the same price as the Mercedes 6x6, except bigger. A much better (and useable) body with factory installed lights. At least they made it for everyone instead of leaving it limited for Snap-On only at those ridiculous prices. That one IS overpriced.
Try adding a short stiff spring on the shock shaft so that halfway through the travel, it acts as a helper spring. You will lose a bit of compression travel but at least it will ride higher and sway less.
I'm glad to see they used ball bearings on that carrier. When you showed the underside I think I saw some molded in support, so I believe that the bed is injection molded. I agree it needs stiffer springs and sway bars on the rear. I saw a video (@Scott RC) where someone had made the Snap on tools version into a functional roll back. It WOULD have been nice if they had made the bed an inch wider! One more on my list of toys I want but cant afford🤣!
IT looks good!😃Go to (Scott Rc on You Tube Channel) he has a custom hauler with a working hydraulic bed that operates smoothly😉He has custom tips to make it more machine like.😁 (Nice unboxing joe!👍)
@@steveyates1098 😆Custom mods and aftermarket parts,hopefully he'll dream on it and build perfectly.😉and most of all sound kit ess module.🙃👍just upgrade and save.🤑
Love mine ,can't wait 4 them tow calls😊We just held r 1st Crawlers event was sweet ,prizes & gifts plaques 👍#Rc Hauler 📢📢This one is about a foot longer 👋🌍🔥🔥🔥🔥🔥
Hell yeah the driveline of TRX4’S are bomb proof, mine got rolled over by a car and still drove off, frame was straight as an arrow and the motor could spin the wheels😱 killed the servo tho😟
You could do the same as my crossRC BC8 / MAZ 537 rear suspension as a beam that pivots between front and rear axle. If you do it cantilever style with really stiff spring you keep some suspension up and down, not just pivot 1 up the other down. I really want the bed to move like a real roll back before I'll buy one.
So what I’d like to know is why didn’t traxxas continue this truck when they came out with the snap on edition! I definitely would have got one of these before I bought the Mercedes edition! Nice truck though!!👍😁😎
It's completely Traxxas for the bed to be to narrow for anything appropriate to fit. I betcha th they sell a kit to make it as wide as it should have been.
FINALLY! A RC TRUCK/CAR BIG ENOUGH FOR MY BARBIE 😆 OKOK, DONT COME FOR ME. MY HUSBAND SPENDS 1000'S ON THIS STUFF. I KEEP TRYING TO MAKE HIM UNDERSTAND 😩 HOW THIS IS KIND OF A WASTE OF A WASTE OD MONEY 💰 🤑 💸 😒 😪 😕 IM HAVING Q BARBIE COMPETITION FOR ALL THE GF/WIFES WHO ARE WITH ME!! IM HAVING SOMEONE FLY IN TO DO MY BARBIES HAIR JUSTFOR THE OCCASION
Your flying someone in just to do your barbies hair but rc cars are a waste of money you are the typical modern woman price is not an option if its something you want
Way to expensive for me and when will traxxas stop painting the windows it makes it look cheap and nasty sorry it's just not for me,to be honest there isn't anything traxxas makes I like there is better out there for a lot less
![fellow fellow - พรุ่งนี้ไม่มีใครรู้ feat. INK WARUNTORN [OFFICIAL MV]](http://i.ytimg.com/vi/QP6JyjYx_W0/mqdefault.jpg)
You got a very good TRAXXAS, congratulations, friends🎶⤴️👍
A few are complaining about the price point. This is literally the same price as the Mercedes 6x6, except bigger. A much better (and useable) body with factory installed lights. At least they made it for everyone instead of leaving it limited for Snap-On only at those ridiculous prices. That one IS overpriced.
Got mine and its BIG. Can’t wait to make the bed tilt and slide 👍🏻
m.th-cam.com/video/FQAd22tTP_4/w-d-xo.html
The way traxxas does things, I'm thinking/hoping they come out with a "wide bed" lol, for this. They know how to get our money haha.
👍Good One!😅
That thing is sweet! You can put squirrels on the back, too, lol.
Definitely agree on all those upgrade. It’s cool. Need a sound box with some stacks. Then we are styling.
love the scx6 attempt
Nice can't wait to see the rebuild on this one. 👍🏿
Try adding a short stiff spring on the shock shaft so that halfway through the travel, it acts as a helper spring. You will lose a bit of compression travel but at least it will ride higher and sway less.
This is a cool rig. I got to drive it at the hobby shop for a bit. Now i want one. 👍👍👍
The truck looks great 👍
Traxxas takes cues from aftermarket and makes it theirs lol... Take my money!!!
The more I see of it the more I want one.
I'm glad to see they used ball bearings on that carrier. When you showed the underside I think I saw some molded in support, so I believe that the bed is injection molded. I agree it needs stiffer springs and sway bars on the rear.
I saw a video (@Scott RC) where someone had made the Snap on tools version into a functional roll back. It WOULD have been nice if they had made the bed an inch wider!
One more on my list of toys I want but cant afford🤣!
IT looks good!😃Go to (Scott Rc on You Tube Channel) he has a custom hauler with a working hydraulic bed that operates smoothly😉He has custom tips to make it more machine like.😁 (Nice unboxing joe!👍)
You beat me to it he's done an awesome tilt and slide
@@steveyates1098 😆Custom mods and aftermarket parts,hopefully he'll dream on it and build perfectly.😉and most of all sound kit ess module.🙃👍just upgrade and save.🤑
Nice Truck! Can't wait to see it crawl!
Revolver classic would be perfect for that!
Scott rc did a rollback setup with the snapon edition after it came out
I'm sure they'll be new beds , sway bars an anything we can dream of from the aftermarket co
This awesome I can’t wait to see how many upgrade you will put on this epic truck💯
Love mine ,can't wait 4 them tow calls😊We just held r 1st Crawlers event was sweet ,prizes & gifts plaques 👍#Rc Hauler 📢📢This one is about a foot longer 👋🌍🔥🔥🔥🔥🔥
WOW great looking truck such a shame that the bed don't move. Other than that AMAZING 🇬🇧🇺🇲🕊️✌🏼🤩👍🏼
Can’t wait to see what you do with it my man
I want one but I can't let myself spend that much for it . Glad you got one cause you'll do some good things with it .
Look so good
Hell yeah the driveline of TRX4’S are bomb proof, mine got rolled over by a car and still drove off, frame was straight as an arrow and the motor could spin the wheels😱 killed the servo tho😟
LoL wow
Mine should be here shortly
So your talking about the rubber overload blocks.. most trucks have…?
Take it up Climb Time! Lol
You could do the same as my crossRC BC8 / MAZ 537 rear suspension as a beam that pivots between front and rear axle.
If you do it cantilever style with really stiff spring you keep some suspension up and down, not just pivot 1 up the other down.
I really want the bed to move like a real roll back before I'll buy one.
hopefully we will get a light upgrade so we can have rock lights brights and hazards
Yeah these run at 3v I think so they aren’t compatible with most of the rest of the world. I did all kinds of rock lights on the trx6 a while back.
Shit I want this, needs a wider bed and dual tires in the rear axles. If the aftermarket companies delivers that ill pick one right away
Love the video! Dude you help so many!
Awesome
Been waiting for this lol haven’t got mine yet
what colors do they have out for that!!!
why don’t you use the mark santa maria thumb steer wheels?
also plz put the black vitavon stuff on it so it looks cleaner 🤣
3645 outrunner at 1400KV/4S will suite this truck prima!
It only needs .... Dually sets on the rear widened rear bed with tilt and slide 🤔 I want one !!!!
And a lower pinion with brushless 😁
It was made to fit the TRAXXAS SPORTS/ROAD BODY CARS THEY MAKE. SEE IT ON HARLEY'S VID✌🏼
So what I’d like to know is why didn’t traxxas continue this truck when they came out with the snap on edition! I definitely would have got one of these before I bought the Mercedes edition! Nice truck though!!👍😁😎
You answered your question , marketing they sell more by being the ones and only while using same platform
Might have had a deal with Snap On that has run out now.
It's completely Traxxas for the bed to be to narrow for anything appropriate to fit. I betcha th they sell a kit to make it as wide as it should have been.
Too bad the proline carbine duallies don't fit over the portals, you can run em super wide but they look stupid that way
Find a friend that can 3d print a wider bed. Then you have something
Don't get why you always go to a sway bar. Why not learn how to tune shocks?
I thought the bed goes down like a ramp. What a shame traxxas
looks really nice, but is useless that hurts, unless you have an extra 1000 to spend, it just gonna sit in your shelves for life
I hope to make it useful at events. Not sure how but I hope to do that.
FINALLY! A RC TRUCK/CAR BIG ENOUGH FOR MY BARBIE 😆 OKOK, DONT COME FOR ME. MY HUSBAND SPENDS 1000'S ON THIS STUFF. I KEEP TRYING TO MAKE HIM UNDERSTAND 😩 HOW THIS IS KIND OF A WASTE OF A WASTE OD MONEY 💰 🤑 💸 😒 😪 😕 IM HAVING Q BARBIE COMPETITION FOR ALL THE GF/WIFES WHO ARE WITH ME!! IM HAVING SOMEONE FLY IN TO DO MY BARBIES HAIR JUSTFOR THE OCCASION
Your flying someone in just to do your barbies hair but rc cars are a waste of money you are the typical modern woman price is not an option if its something you want
Way to expensive for me and when will traxxas stop painting the windows it makes it look cheap and nasty sorry it's just not for me,to be honest there isn't anything traxxas makes I like there is better out there for a lot less
you'd think for the price the bed would move AND it would have a winch. No thanks
If it did it would cost over $1000 and you still would whine