LENOVO X1 CARBON GEN3 - I BROKE ANOTHER LAPTOP PART II

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ม.ค. 2025

ความคิดเห็น • 15

  • @chrisstephens7901
    @chrisstephens7901 4 หลายเดือนก่อน

    Brilliant fault finding, thank you for the content, I really enjoy how you structure the videos. Thank you

  • @cliffordh4595
    @cliffordh4595 4 หลายเดือนก่อน +1

    The closer you get to any short the less Ohms you'll pull. Doesn't matter if it's a partial short or not. A apparently you don't a thermal camera. I've found 40 millivolt short with mine. A good one with high resolution is worth the money. I do enjoy your channel, I've watched all your videos and learned

    • @Electricworld-1
      @Electricworld-1 4 หลายเดือนก่อน

      It's less amps not less homs😂

    • @Electricworld-1
      @Electricworld-1 4 หลายเดือนก่อน

      I got the p2 pro thermal camera, your right

    • @therepairshare673
      @therepairshare673  4 หลายเดือนก่อน

      Yes, I actually borrowed a Fluke meter to see if it could provide more granular resistance measurements, but every one of my multimeters measured 37ohms (resistance) and 0.034V (diode) at all points. I guess the key would be to have a multimeter that could give high enough resolution to measure the resistance of the inductors. Thanks for your contribution.

  • @MuertoGB
    @MuertoGB 4 หลายเดือนก่อน +2

    A pointer for you, do not inject 5V into a 5V rail because it's a 5V rail. On these types of devices you want to be injecting 1V maximum on any power rail in case it's shorted through to something like the PCH, CPU or memory power well.

  • @karltest1314
    @karltest1314 4 หลายเดือนก่อน

    Another great tutorial, thank you. I would have started measuring the empty pads, because there could be a chance that the ic ok and an output is pulling it down

  • @Electricworld-1
    @Electricworld-1 4 หลายเดือนก่อน

    As usual, I think you're videos are absolutely spot on, I recommend that you get yourself a thermal camera to save time , have a look at the p2 pro thermal camera on youtube, I got one and it's very sensitive you should be able to easily see the thermal at 5 volts 100 milliamps. ❤🎉

    • @therepairshare673
      @therepairshare673  4 หลายเดือนก่อน

      I will check out the p2 camera, thank you.

  • @celulartj
    @celulartj 4 หลายเดือนก่อน

    Excellent video .... learned much from it , Thanks

  • @BJFarmerAuthor
    @BJFarmerAuthor 3 หลายเดือนก่อน

    Big fan of your channel. Keep up the good work.

    • @therepairshare673
      @therepairshare673  3 หลายเดือนก่อน

      Thank you. New video coming this weekend.

  • @MARKLARverklas
    @MARKLARverklas 4 หลายเดือนก่อน

    EXCELLENT VIDEO AS ALWAYS !

  • @justinmsoffe7298
    @justinmsoffe7298 4 หลายเดือนก่อน

    Nice work Bro.

  • @danarepouille1381
    @danarepouille1381 4 หลายเดือนก่อน

    You have a very methodical and low-risk process, which serves you well. I love to see the schematic and your unique version of the board view. It really helps to visualize the circuit and paths on the board.