FLEX PIPE EXHAUST REPAIR !! EASY DIY !!!!
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- In this video i show you how to replace an exhaust flex pipe. This particular car is a ford focus, however the same procedure can be applied to any car with an exhuast flex pipe.. Flex pipe exhaust repair
****Get your KLOWNY1969 Shirts and Sweatshirts Here: teespring.com/...
Check out my channel for automotive how to videos:
Ford focus control arm replacement:
• 1998-2010 Ford Focus C...
An example of a bad wheel bearing and how to check:
• How To Tell If You Hav...
How to Bleed the air out of a cooling system:
• How To Bleed The Air O...
How to install a holley stealth ram:
• How To Install a Holle...
How to install a vintage air system:
• Vintage Air Install !!...
How to Convert from a mechanical cooling fan to an electric fan:
• Mechanical Fan To Elec...
How to make steel braided lines:
• How To Make Steel Brai...
How To Bleed Brakes:
• How To Bleed Brakes - ...
How To change Brake Drum Shoes:
• How To Change Drum Bra...
follow me on facebook:
/ klowny1969
follow me on instagram:
/ klowny1969
Follow me on twitter:
/ klowny1969_
How to install a dakota digital dash:
www.youtube.co...
I enjoyed watching this. I miss working on cars. You having fun with all those tools and techniques. I am 50yo and worked in IT for past 25+ years. I missed the normal work instead of this abstract work. I came to see the $300+ charge for replacing this on my car.
Thank you for watching and commenting and don't forget to subscribe
You provide such great material to your viewers. I appreciate all of your hard work. I truly appreciate it!
Thank you for commenting
one of the best detail video in a while
Thank you!!
Great video well done. Good clear voice and close up with the camera. No stupid music going in the back ground. I just had my 06 Honda Ridgeline done.
Arthur Smith thanks
This goes by so well when you have the right tools
yep! try doing that lying on ur back with the car wedged right over ur face and armed with nothing but a ratchet,vicegrips and a hacksaw! oh , AND LOTS OF PENETRATING OIL!
"I'm not gonna use a torch for you DIY guys," then proceeds to use a lift and numerous pneumatic tools.....
Lennon Morales hahahaaa .. u dont need a lift to go underneath a vehicle..and the pneumatic tools arent necessary as well, although alot of diy guys do have air tools..thanks for watching and commenting
Lifts aren't terribly expensive, it's having foundation that make the means
True, but it added to the humor!
B R E A K E R B A R S
Lennon Morales haha yeah as soon as he says yeah I’m going to use this air hammer, I’m like yeah I don’t have that
when buying ur bolts at hd, or wherever, make sure to get stainless hardware to keep the rust at bay.
Good job bud. I have all the same tools as you except that beautiful LIFT! I'd never leave the garage if I had a lift like that!
Fireship1 i usually spend the entire weekend in there lol
Real men use goddamn jackstands.
@@willem2544 LOLOLOL!!
@@michaelreece458 peasants use jack stands
@@michaelreece458 Guys like me pay a guy like that to do exhaust work cause crawling underneath to do that forget it.
This is your 2nd video that saved me big $$ on my Focus. Thanks--keep it up! One thing I wanna point out is that that flex pipe is for the 2.3L Focus PZEV engine, which makes sense since you're in NY (a PZEV state). The 2.0L Zetec was the most popular engine and is what most 01-04 Focus owners watching this video probably have. The pipe for that engine is the Walker 52243
1975augusto kool!
must be nice having all that space to work
Thanks - replaced my flex y pipe on my Enclave… very similar and wasn’t too bad ($200 no torch and 3 hours)
Awesome! Glad i was able to help you out..don't forget to subscribe
You made short work of that! Loved the humor!!! Too many damn people trying to convince others to be PC in this crazy freakin world. Think and say what want,but leave others the F alone! Btw, and you seem like a smart dude and may already know this, but for those that don't, Kroil is great for cleaning gun barrels as well. Cheers
MG-70 lol screw pc hahaaa yeah kroil is used for a ton of stuff..thanks for watching and commenting
Nice work straight to the point no bs great video
love the klowny tube channel
bigwillywes78 thank u sir
Having four hands is really helpful.
I thank my lucky stars..dont forget to subscribe
Amazing video quality. Thanks for putting in the time and effort for making and sharing this. Much appreciated. I saw a few drops of water leaking from one of the flange connections. Is this something that one should try to seal up with high temperature silicone gasket? Or is a little water leakage from the seams OK?
Little water is ok..don't forget to subscribe 😉
I like the humor and good work
Thank you..don't forget to subscribe
An induction heater would make quick work of those rusty nuts. Today they are a $500 tool any shop can afford.
Yes I have that tool, I tried to gear this toward the average diy person..thanks for commenting and don't forget to subscribe
My idea worked. I think I found my exaust leak.To listen better, I put my ear muffs on to drown out much of the vacuum's noise. I used the blowing end of the vacuum.
Good informative video. Thanks!
Thanks for watching and don't forget to subscribe 😉
I can always tell when a guy knows what he's doing. Looks like you know all the little tricks. If you wouldn't have hit the bolts with the pneumatic chisel it most likely would have broken the bolts off when you removed them. Great job.
victory21222 thank u
Great video man! This was very helpful! Now I know how to change my own flex pipe!! 💪
ShayButtaTV thanks for watching and commenting
“hello ladies” 😂
🤣🤣🤣
😂😭
Dang i don't have 3 hands like you! Good video man thanks
lol glad i was able to help..dont forget to subscribe
"Gonna tap it, like a bitch that ows me money" lmao
Excellent. Thanks!! 😊
Thank you..don't forget to subscribe
Another job well done, yes sir . Cheers buddy.
STEVE ROB thanks for stopping by again and watching
The studs at the cat on the manifold on an 07 are a real PIA.
Yep! Thanks for watching and don't forget to subscribe and hit that bell
@@klowny1969 I hit it after giving it a little shot of butter sauce.
Your accent and not seeing your face I'd swear comedian Anthony Jesilnek was doing an automotive video.
It could be!!
@@klowny1969 this is a twist if I've ever seen one! 🤣
Kinda like the sex scene from the Watchmen and Dr. Manhattan where suddenly there are more than two hands doing the 'job'. Thought you were by yourself until then. :-)
39knights LOL
On that second flange since it's an actual nut and bolt you could tighten instead of loosen and just snap it and replace nut and bolt. It's sometimes easier to do that instead of trying to get it loose. I have done this and it works. I wouldn't do that with studs of course, but if it can be replaced, why not?
Thanks for the advice! Don't forget to subscribe
man you're the best.....just subscribed.....makes me realize I need to invest in good tools....etc
Nice homemade bandage.
Thank u..don't forget to subscribe 😉
I'm glad your socket didn't break
Carlos Antonio Lopez Chavez say what?
Great job
Thanks..don't forget to subscribe 😉
Luv the commentary. New follower
Thank you!
Thanks for watching and don't forget to subscribe
Good video, nicely done!
thanks for watching and dont forget to subscribe
nice video klowny love the work love working on my car
Thank u sir
diy says the octopus with a full toolbelt.
I have an ‘09 Hyundai Accent as a fixer up... and definitely gonna try doing this myself, this time around. I got charged $180 for my Malibu. When the item itself was $30. 🙄
Yes, you should..thanks for watching..dont forget to subscribe
homeboy your fucking entertaining, i need more videos from you!
You're *
Nice job dude
john smith thank u
I just had the flex pipe done at an exhaust shop here in Philadelphia.. 2006 Nissan Altima.. $120.00..
Thank you for watching and commenting..don't forget to subscribe
Nice job
so can you do a tutorial on how to change the spark plugs of a third gen Camaro? I have a 1992 Rs Camaro hatchback and I have never worked on a car before, it's a piece of shit but it's my piece of shit. it's my first car and I want to learn how to do stuff on it. your videos have helped me out allot.
Jonathan Criswell if i get a chance to, sure..thanks for watching and commenting
Are the flex pipes common to go bad on these cars?
How long they last I just got mines done on my Camry ? Usually with my truck I didn’t need a flex pipe.
Zionic-iDrxp-YT has to do with FWD vs RWD (usually). A lot of RWD vehicles don’t use flex pipes
Oh it must be so nice to have a bolt on flex pipe. Very useful indeed.
Yes it's handy..don't forget to subscribe
Will a bad flex pipe make a loud noise only when u start the car and accelerate that's what my exhaust is doing.
it could be numerous other things as well..you need to identify where the noise is coming from..dont forget to subscribe
So at 2:39 he says “I’m gonna tap my mom cause she owes me money”, very classy... bet she would be proud...
I would never say that..not me..no way sir
Tap the bitch like she owes me money is what he said. You clearly can't hear shit....
Chris Taylor u clearly can’t either fucktard
@@bobvilla7230 xD
Tap YOUR mom. Cause she owes me money. You're just being stupid. Walk on home boy.
good work
Thanks..don't forget to subscribe
Thanks you made my day
Steve Mick thank u
Man is only as good as his tools
Na I don't own a crazy amount of tools and still know way more than some guys that do.
I love your "intro" 🤣🤣🤣
Thanks for watching and commenting..and dont forget to subscribe!
No engine light for broken flex pipe?
2.30 to 2.40 tap the bitch like she owes me some money jaja pricelesss,,, love it...
very good
Thanks don't forget to subscribe
hola amigo se le puede añadir silicon gris a la junta para que selle en caso de haber fugas???
I got a nice beefy air hammer!!!
2:38 "Tap the bitch like shows me money"
Does he realise he is making a video right now? Help videos should be down the line and delivered straight, like a gentlemen would do.
damn klowny, how many hands do you have? no wonder you so good at fixing cars, and maybe at other things lol at 6 min.
Bob Smith lol .. more hands the better haha
Good job, Bro.
Narin Van thanks!!
What does the Andi seize do for the bolts?
protects socket from stuck rusted nuts
I knew it was a ford focus the second I saw the wheels
Lol yup!
sorry but please explain to me when a car uses a downpipe and a frontpipe at the sametime? we got one pipe that connects to the exhaust manifold and one that connects directly into a tubro how do you have btoh😂
No turbo on this car..don't forget to subscribe
Not sure if it was anythingto worry bout but what was the water bubbling when it was started
i dont think it was anything...probably AC condensation..i would have to look at the video again..dont forget to subscribe
My car smells like fumes when warming it up. I wonder if this is the part that has the leak. A guy charges me $1000.
1K? that's crazy
Nice job well done..
Taj Tomlinson thanks
Any way to do maintenance to that part, like spray wd40 or other thing?
Nope
what brand and model air hammer is this? I noticed the straw on the pent fluid can was longer then the standard can where did you get that ?
I bought a aftermarket header tht came with a new flex pipe. now the car makes a ticking noise. don't see any leaks anywhere but I heard the flex pipe that comes with headers is junk. can a ticking noise come thru a cheap flex pipe
ticking noise is usually a leak..dont forget to subscribe
hey can you do a video on Chevy impala rack and pinion need a little help
Dominic Fincher if i do that job..ill film it
I'm here cause I have a 2009 HHR that just rolled 100k a month ago and low n behold the engine light came on for 3 days. Then went off as soon as I borrowed a friends code reader. It still came up with a code even without the engine light on. The code $7E8:engine and $7EA. I've looked all over the web and came up with "Hot oxygen sensor" and cracked flex exhaust pipe.
Does this sound right to you or anyone in comments?
Will replacing the flex section like you did here reset the engine warning light?
Just looking into it before going to a shop and hearing what they think and will charge.
Thanks for your time and cool video.
idk but if your car sound louder than usual when you start it and it makes lot of noise when you drive then you need a flex pipe . run you about 180-350
the only thing this video tought me is that i need a fucking air hammer asap
nicely done.
Thank you
off topic a bit but is it okay to spray the engine with degreaser then rinse it off without damaging anything? Sorry if it's a dumb question.
Kevi O u can just becareful u dont get any of the wiring wet
I dont miss working on that eastcoast salty crap.
russellfheim everything and anything i work on is rusted to sh1t!!
HA, Yea, one hand a torch, the other an IMPACT socket.
I love the rust feels so good.
What year focus & is it diesel? Mine focus-max 2.0lt tdi 2006, needs the same, is this the same part number?
Cheers
Yeah like my ol lady would be doing this repair or any repair herself LMAO!!!! I'd be one rough looking lady 😂😂😂😂😂😂😂😝😝😝😝😝😝 thanks for showing the part where you had to use vice grip pliers instead of doing it off camera and playing it off like it came right off with the box end wrench...that'd be the route I take because I doubt I have a bolt the same size laying around and I'd put it back on with the vice clamps too and make a note of it in my book of repairs
Thanks for watching and don't forget to subscribe!
Can flex pipe be part of the header? And if so do you habe to replace whole thing?
You can cut it off and replace it..Thanks for watching and don't forget to subscribe
@@klowny1969 thx for info, would most auto shops have flex pipes laying around or you have to order it?
what was the name of the penetrating oil in the spray can? Nicely done BTW.....
Thank u..i used kroil ..thanks for watching and commenting
EASY DIY REPAIR! *see note.
* This DIY repair requires a few basic things any DIYer has laying around their garage: a 6 ton lift, impact wrench, 3 feet ratchet extensions, and $4,000 worth of assorted tools. Good luck DIYers!
I thought everyone has that stuff??
"my favorite personal lubricant" hahahahaha
stopherrr yeah babyy
tap the bitch like she owes me money
dude I love these videos
stopherrr lol thank u
What size are those 4 bolts? Thank you!
3/8 x 1 1/2
he said farts, butter sause and nuts! lol
Was that flex pipe and flanges welded by you or was it a one piece bought at the local autozone
One piece..I mentioned in the video the part number I think
Why not use springs at the bolts?
no need for springs
Damn sly Stallone's a mechanic?
Yo Adrian
Ah, so this is what an $1,100 dollar repair job looks like.
ZombiZohm its a peice of cake to do yourself
They want to charge me 1300
Just tap it like you do to a b**** that owes you money. You just make my day man.
Laurentiu Lucian lol
Impact gun with chrome socket. Good plan.
GophukYerselv I'm rich..I can afford to mess my sockets up
I was looking at impact sockets at Lowes a few years ago. Guy there talked me into going cheap becuase they have a lifetime warranty. So I did.....lol.
Fck the torch the amount of shit I could do with a damn lift
Thanks for watching and don't forget to subscribe 😉
What is part number for that flex piece.
Hi Klowny1969, could you recommend andy video's on air tools please, I picked up an impact wrench here in UK 2nd hand no instructions, it has settings one to 4, I am unsure how to determine what settings to use as scared of breaking bolts, also do you set the compressor at say 90psi before you press the trigger on the tool or does it need to be say 90 psi when using it, also as I see how hold spanners on the other end while using air tools is this ok when using certain settings as scared of breaking my arm, excuse my ignorance but I would like to learn, many Thanks Ian
sandydogy i keep everything maxed out..150 psi on compressor and highest setting on gun..ignore the recommended 90 psi, u would never take anything off...snd only use impact tools when taking bolts off..not putting them back on, unless u know what ur doing
klowny1969 thanks
Have you ever changed the rear gate trunk support shocks on jeep grand cherokee? I'm willing to lend mine for a demo....😉
Edie Mazzullo lol ive been so busy..unless ur willing to wait two months or so
😓bummer
Edie Mazzullo sorry..i have two people waiting for the cars to be done..hope all is well with u and ur family ☺
No worries buddy. miss you so glad you're busy..
busy is awesome. 😄
Edie Mazzullo thanks 😊
“Tap the bitch like she owes me money “ 😂
PUSH THAT HEAT SHIELD BACK SON !!!
Juan Fernandez YES
How much does a repair like this cost? I ran over a dip kinda hard and now I think I dented/broke mine.
depends if they change just the flex pipe or the whole pipe itself with the flex..just the flexpipe should be under 100 bux..if the whole pipe needs to be changed..then u could be looking at couple hundred, depending on car
klowny1969
It's a 2008 ford Taurus it was throwing a P420 code the day after I hit the dip and looking under the car the flex pipe looks pretty dented...so I'm hoping that's what it is so I don't have to replace the whole thing.
neverseize turns to concrete with heat