30hp Custom trim and tilt.

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 57

  • @bobbell5928
    @bobbell5928 5 หลายเดือนก่อน +1

    wish I would have seen this 3 years ago. Subbed!

    • @25hpboatracerman
      @25hpboatracerman  5 หลายเดือนก่อน +1

      Welcome aboard Mate 👍
      Yeah, it’s pretty awesome, the longer tiller is great too.
      Just serviced that motor, thinking maybe of selling if I can bring myself to 😂
      Cheers 🍻
      Aussie Boat Guy 😎

  • @_Albertone
    @_Albertone 2 ปีที่แล้ว

    This is awesome! I've recently picked up a 30 Tohatsu and I am planning the same

  • @rossrovs
    @rossrovs ปีที่แล้ว

    Really like your experiments and work, especially the small engine stuff. I found your channel while searching for power-tilt conversions, as I have a project that requires a 15-20HP, 4-stroke electric start with forward controls. Not much around second-hand that has power-tilt as well. Maybe a visit to the wreckers is in order! Cheers.

    • @25hpboatracerman
      @25hpboatracerman  ปีที่แล้ว

      Thanks so much mate, I really appreciate your encouragement 😊
      Yeah, it’s hard to sort out trim and tilt if the motor doesn’t share the same bracket as a trim tilt version.
      Always a way around it of course 😂
      All the best,
      Aussie Boat Guy 😎

  • @thehousemouse4517
    @thehousemouse4517 3 ปีที่แล้ว

    Aloha super rad ! Awesome conversion!

  • @BennyK777
    @BennyK777 3 ปีที่แล้ว

    That’s wicked man. Just fitted electric start to my 30hp Merc. Would love PTT. Looking forward to see the video on a longer tiller.

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Cheers mate.
      Yeah electric start is awesome 😎
      Done that to mine now too.
      You reminded me about the long tiller video, I had actually forgotten. Thought I lost it and could not find the footage.
      After searching, it’s on my phone, edited and ready to post.
      Will try to get it up tomorrow.
      Cheers.

  • @nickscanlan1792
    @nickscanlan1792 3 ปีที่แล้ว

    This is a mad mod, keen I came across your channel

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Cheers mate,
      Love doing that stuff, took it out on a tinny the other day, it’s awesome 😎

  • @sagansprague448
    @sagansprague448 5 หลายเดือนก่อน +1

    Thinking about doing something similar blew the original motor mounts out. Having trouble removing the leg from the steering bracket and the service manual is not much help. Any advice for removing the studs/ lower motor mounts would be greatly appreciated.

    • @25hpboatracerman
      @25hpboatracerman  5 หลายเดือนก่อน +2

      Hi Champion,
      Yeah, they can be stubborn. From memory, there are retainer plates and the mounts slide into the trunk (leg). You will not be able to remove the complete clamp bracket from the leg without removing the shift rod (gear selector rod). This can be done by removing the carburetor and taking it upwards with some manipulation.
      Cheers 🍻
      Aussie Boat Guy 😎

  • @colinmead8996
    @colinmead8996 3 ปีที่แล้ว

    What a great 💡 idea ✅🙌🏻

  • @User-ux3xv
    @User-ux3xv 3 ปีที่แล้ว

    Hey mate love your vids can’t wait to the next video

  • @douger1517
    @douger1517 3 ปีที่แล้ว

    Yep I love it, make heaps more vids like this. Love to add trim tilt to Tohatsu 18hp.

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Cheers mate, really appreciate it.
      I did it to a 18hp as well.
      Check out my other vids I added trim tilt to a 15hp Mercury super which is the same as the 18hp tohatsu.
      Can’t get enough, I love it.
      Cheers

  • @mathewthompson5709
    @mathewthompson5709 3 ปีที่แล้ว

    Hi mate
    Great videos
    I have just got my first boat and it has a 25hp Honda just wondering if u could point me in the right direction on where I could get my hands on a trim and tilt like this ?
    Cheers

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว +1

      Hey mate,
      I would just ring around all the outboard wreckers. Also keep an eye out for any non running motors for sale.
      If I’m after a part I often put an add up saying wanted part etc.
      Cheers and enjoy being on the water mate.

  • @Hahehhwgajshah72726..
    @Hahehhwgajshah72726.. 3 ปีที่แล้ว

    Love the videos mate.Do you have any idea how I can add tilt/trim to my forward steer yamaha 30 hp cv and roughly how much it would cost if possible?
    Any help appreciated.Keep up the great work.

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Hi mate,
      The best way would by to add a CMC pre-made trim-tilt unit.
      Think they are about $1400.00.
      Adding Custom trim thd way I did my motor would be extremely expensive if you had to pay someone to do it.
      Maybe the cheapest way would be sell your motor and but one with trim tilt.
      Cheers 🍻

    • @Hahehhwgajshah72726..
      @Hahehhwgajshah72726.. 3 ปีที่แล้ว

      @@25hpboatracerman Thanks mate.My thoughts too.I looked into the cmc and panthers ages ago and thought even they were very expensive I'll keep her as she is until I decide if I can justify buying a 40hp brand spanker.8k buys alot of fuel.😂

  • @yahnpavlovic9626
    @yahnpavlovic9626 4 หลายเดือนก่อน +1

    Hey mate, did you paint the outboard yourself?

    • @25hpboatracerman
      @25hpboatracerman  4 หลายเดือนก่อน +1

      Hi Mate,
      Yes I did,
      it’s two part primer followed by two part gloss paint, finish is actually better than new factory and used reproduction decals.
      Cheers 🍻
      Aussie Boat Guy 😎

    • @yahnpavlovic9626
      @yahnpavlovic9626 4 หลายเดือนก่อน +1

      @@25hpboatracerman yeah the finish is amazing, is this just out of a can?

    • @25hpboatracerman
      @25hpboatracerman  4 หลายเดือนก่อน

      @@yahnpavlovic9626
      Hi Mate,
      It’s Two part paint, you need to mix two parts and use a spray gun.
      The finish from a can is not as good and also the paint from a can is not as hard wearing and can be affected by fuel or oils
      Cheers 🍻
      Aussie Boat Guy

  • @Hill_Billy_Without_A_Hill
    @Hill_Billy_Without_A_Hill 3 ปีที่แล้ว

    Im curious if the 18HP tohatsu outboards are really a 20 HP or 25 HP block choked down with the carb. Any thoughts?

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Hey mate,
      I have a video on this exact question, search tohatsu 18hp comparison. Here is the answer as well. The 18hp tohatsu two stroke is actually a stand alone power head. It is visually the same as the 9.9hp and 15hp power head but has a larger bore and bigger ports and the 18hp has a bigger carburetor. Same crank, seals, reeds, exhaust cover etc.
      the only way to tell a 18 block from the 9.9 and 15 Block is it has 60 stamped on the port side of the block (60mm bore) and the 9.9 and 15 have a 55 stamped (55mm bore)
      Cheers,

    • @Hill_Billy_Without_A_Hill
      @Hill_Billy_Without_A_Hill 3 ปีที่แล้ว

      @@25hpboatracerman Thanks for the info. I got a 18HP and it runs crazy good. Pushes my 16ft Jon boat up to about 25 miles per hour with one guy and about 22 miles per hour with two guys and gear.

  • @bcbrando7678
    @bcbrando7678 3 ปีที่แล้ว

    Hey mate from BC Canada! Eh I got a 25 merc sea pro same as in the vid I up rated to 30hp via changing intake gasket and setting timing to 25* is there Anything else a guy can to for more power? Have herd the exhaust tube is different on the 30? Any help would be much appreciated! Love this channel!!! Cheers!

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว +2

      Hi mate.
      Well done on a great motor, they are awesome.
      The exhaust tube is the same in the 25 and 30hp version, looks like you already got the extra 5hp.
      We have shaved the head on them in the past to make more compression (around 170psi) this have us better torque by a fair bit but didn’t notice top end speed increase. We have also played with raising the exhaust port which changes the power band to a higher rpm and results in better top speed. Keep in mind it’s very easy to loose speed if the slightest thing is wrong with the porting.
      If your motor is on a light boat I would play with props and engine height over trying to mod the motor as they are pretty dialed in already.
      If it was a 30hp Yamaha 3 cylinder then you can get a fair amount more power out of them but the tohatsu built 30 (Mercury) is a great motor.
      Hope this helps

    • @bcbrando7678
      @bcbrando7678 3 ปีที่แล้ว

      @@25hpboatracerman thanks so much cheers!

  • @dennish6987
    @dennish6987 2 ปีที่แล้ว

    I’ve got a 2004 merc 25 I’m hoping to do this to hoping it’s the same as your 30

  • @michaelnelson912
    @michaelnelson912 3 ปีที่แล้ว

    Did you put it on the Fish Nipper? I’ve always thought that hull could use more than 15hp... top speed?

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Yep tried it out on the fish nipper, was a rough day. The hull coped well with the 30hp. I didn’t gps the top speed but would have been very close to 63kph.
      Cheers mate.

  • @bennyj9426
    @bennyj9426 10 หลายเดือนก่อน +1

    Hey mate. Where are you located. I really need this

    • @25hpboatracerman
      @25hpboatracerman  10 หลายเดือนก่อน +1

      Hi Mate,
      I’m in NSW Australia.
      unfortunately as you saw it’s a very custom unit and I am not planning on doing any more, the labour and parts are worth more than the outboard sadly.
      You could look up the CMC trim units, they are off the shelf.
      My trim - tilt setup will go with my motor when I finally sell it.
      Cheers 🍻
      Aussie Boat Guy 😎

    • @bennyj9426
      @bennyj9426 10 หลายเดือนก่อน +1

      All good mate. Did you do the whole thing with a 9 inch grinder. Shaping and all. And also the grease nipple. Did you line it up with the existing hole on the internal barrel. Might have a crack at this. Cheers

    • @25hpboatracerman
      @25hpboatracerman  10 หลายเดือนก่อน +1

      Hi Champ,
      Nine inch, five inch and 4 inch, die grinders, flap discs etc.
      Yep, the nipple feeds the correct area and also tapped the steering friction screw in the correct spot.
      The steering stops are important as well.
      I reckon there is enough to follow along with in the vid to replicate the unit.
      Keep me posted.
      Cheers 🍻
      Aussie Boat Guy 😎

  • @blakebennett2459
    @blakebennett2459 3 ปีที่แล้ว

    So you have no kick up ? If you where to hit a log or something

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Correct. Unless the Honda clamp assembly has a kick up function, which I don’t think it does.
      Actually don’t think any of the small motors with trim tilt have a kick up function.
      Anyway, where I use the motor is open waters not rivers or shallows. Also plenty of those 25 - 30hp Honda’s floating around with trim tilt still going well so fingers crossed I don’t hit anything.

    • @blakebennett2459
      @blakebennett2459 3 ปีที่แล้ว

      I can understand that. I think maybe the top pin is designed to shear maybe ? Could always mount a kick up plate. Enjoyed your videos on this merc, it’s the type of thing I would I do ! Appreciate the content !

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Cheers mate,
      Did some more research, looks like it does have some sort of internal release if you hit a submerged object but I’m assuming things will break regardless.
      Glad I don’t run skinny water 😬

  • @smannee
    @smannee ปีที่แล้ว

    I'm planning to do this on a 25hp enduro. Any advice?

    • @25hpboatracerman
      @25hpboatracerman  ปีที่แล้ว

      Yep, just know it will take a lot of effort and time and I don’t regret one second of it. Whenever I trim the motor underway I smile from ear to ear .
      Try and find a trim unit that will suit your size and shape then mod to fit your motor.
      Cheers 🍻
      Aussie Boat Guy 😎

    • @smannee
      @smannee ปีที่แล้ว

      @@25hpboatracerman cheers.

  • @tautuhitangira2432
    @tautuhitangira2432 2 ปีที่แล้ว

    Man that's sick! Been wanting to put a trim on my 30merc but no luck with local mercury dealer, have looked on ebay but from watching your vid, seems to be abit more to it than I thought. Interested if you live in qld, I'd pay you for one on it for me

    • @25hpboatracerman
      @25hpboatracerman  2 ปีที่แล้ว +1

      Cheers mate 👍 yeah, I love it.
      Definitely a lot of work and I just did it because i love that sort of one off stuff.
      The parts and labour would end up costing a small fortune unfortunately.
      Have you looked into the CMC trim units? They would end up a cheaper option (not as neat though of course)
      I’m not in Queensland, would like to be though.
      Thanks again mate,
      Aussie Boat G 👌

    • @tautuhitangira2432
      @tautuhitangira2432 2 ปีที่แล้ว

      Thanks for the info mate, I didn't know about CMC, I have just looked at there site, very interesting but your right no where near as slick as your work. Will definitely send them an email cheers man

    • @25hpboatracerman
      @25hpboatracerman  2 ปีที่แล้ว

      @@tautuhitangira2432
      👍👌

  • @User-ux3xv
    @User-ux3xv 3 ปีที่แล้ว +1

    How did it go on the tinny

    • @25hpboatracerman
      @25hpboatracerman  3 ปีที่แล้ว

      Went so well, I’m very happy 😃
      Love having trim while driving at my thumb, makes it so easy.

  • @ocka-t3803
    @ocka-t3803 3 ปีที่แล้ว

    I want to do this my self how can I get in contact with you

  • @Nils_Dods
    @Nils_Dods 10 หลายเดือนก่อน

    Hello can i put a trim tilt unit on a 32hp tohatsu short shaft? 😇

    • @25hpboatracerman
      @25hpboatracerman  10 หลายเดือนก่อน

      Hi mate,
      Yeah of course, I would look into a CMC transom mounted unit.
      cheers 🍻
      Aussie Boat Guy 😎

    • @Nils_Dods
      @Nils_Dods 10 หลายเดือนก่อน

      @@25hpboatracerman Thanks mate 😇

  • @jamesmyles6174
    @jamesmyles6174 3 ปีที่แล้ว

    Hi love watching your videos hope you keep making more.do U have Instagram or Facebook?