Badass I have a Polaris Trail Boss 325 with a Polaris Indy 400 twin snowmobile engine and a Yamaha Raptor 660r with a Yamaha Vmax 600 twin snowmobile engine
That is a very good looking machine . I have one just like it. Have you noticed if or how often the cooling fan turns on. Mine hasn't turned on and i was kind of concerned .
A couple years ago, I had picked up just the gearbox from one of these. Does the front end have a sprocket differential or is it similar to the rear with a fixed axle but with the u-joint and CV axle ends? I'm wanting to make a 4x4 project and I haven't been able to find any pictures of the front end of one of these things at all. Not unless I get a shop manual.
If you picked up a 90's model from the 4x4 style they had some all chain driven! Mine has 3 chains and you have to tighten them in a certain order to get all 3 tight. Not all had the sprocket drive though but they are easy to find around here. I have two scramblers 400 4x4 and one 400l 4x4 they all run one scrambler threw a bearing but does still run just needs rebuilt but all 3 have the sprocket drive. So really just depends because they were putting both out at the same time.
If there is a counterbalance oil. small but important other 400's anyhow, the dipstick is under the air filter housing in the belly if the beast, 10" or so down there.
Dammit, I sold it last month. Where were you? It’s ok. Here in Ontario Canada it’s hard to find parts. And if you do, You have to more or less give up your first born…….. facking parts cost so much. But thanks for the help😞. My next bike will be a xmr. Later miss and thanks.
@Rytis Kasperavicius Sorry Mr, I sold my bike last spring. I could not justify being ripped off from a local wrecker with the prices of parts. Parts are harder to find here in 🇨🇦, Try eBay for parts. Good luck my friend.
Badass I have a Polaris Trail Boss 325 with a Polaris Indy 400 twin snowmobile engine and a Yamaha Raptor 660r with a Yamaha Vmax 600 twin snowmobile engine
I have One of these and I was wondering what the container on the left side behind the front wheel was.
Coolant overflow/reservoir jug.
Oil container for the gas
That is a very good looking machine . I have one just like it. Have you noticed if or how often the cooling fan turns on. Mine hasn't turned on and i was kind of concerned .
my buddy told me they have a issue with the fan or the relay that works it or something like that so I'd deffinetly look into it
I wired mine to a toggle cuz it was doing the same for me
They have to be blistering hot to kick on, I think it’s like 210. Let it idle for a half hour in probably will
Check the temp sending unit on top of rad.
2 stroke power🤘🤘🤘🤘
What size tiers are u running on front and back I want to put some new ones on my trail boss but I want the 4 wheeler to look level
What model did you use for the clutch cover? Have you changed the inside and outside?
Hola 👋 que tipo de combustible lleva este tipo de cuatrimoto
I have one just like it
I have the same rims on mine we’re did you go to get the tires for the 10 inch rims I’m having a hard time finding them
Ordered them on Amazon
A couple years ago, I had picked up just the gearbox from one of these. Does the front end have a sprocket differential or is it similar to the rear with a fixed axle but with the u-joint and CV axle ends? I'm wanting to make a 4x4 project and I haven't been able to find any pictures of the front end of one of these things at all. Not unless I get a shop manual.
It's a solid front end
If you picked up a 90's model from the 4x4 style they had some all chain driven! Mine has 3 chains and you have to tighten them in a certain order to get all 3 tight. Not all had the sprocket drive though but they are easy to find around here. I have two scramblers 400 4x4 and one 400l 4x4 they all run one scrambler threw a bearing but does still run just needs rebuilt but all 3 have the sprocket drive. So really just depends because they were putting both out at the same time.
Have the exact same machine it’s a little rocket
I don’t know how much of a rocket my is, but it’s unstoppable. It’s like a little tank.
Que medida de llantas usas traseras y delanteras
Wheres the dipstick for crankcase oil?
If there is a counterbalance oil. small but important other 400's anyhow, the dipstick is under the air filter housing in the belly if the beast, 10" or so down there.
Hey man I don’t know if your going to respond but I just got mine and I was wondering what’s the gas and oil mix for it
This machine is oil injected, no mixing necessary.
Did you figure it out yet, if you didn’t reply I’ll tell ya
Hard to find parts for these bikes. I have the exact bike.
What you looking for I know someone that has parts for Days
Dammit, I sold it last month. Where were you? It’s ok. Here in Ontario Canada it’s hard to find parts.
And if you do, You have to more or less give up your first born…….. facking parts cost so much. But thanks for the help😞. My next bike will be a xmr. Later miss and thanks.
@@deerdown8355 South Bend Indiana
@Rytis Kasperavicius Sorry Mr, I sold my bike last spring. I could not justify being ripped off from a local wrecker with the prices of parts.
Parts are harder to find here in 🇨🇦,
Try eBay for parts.
Good luck my friend.
I got one almost exactly like it how much do you want to trade it for
Not for sale
Mines for sale or trade in pa
What is the width of these machines
What size tires are on this bike?
Rear… 25x11-10
Front… 25x8-12
Is this a two stroke or 4 stroke?
Anthony Withers 2 stroke
What year?
This is a 1991 Polaris trail boss 350L 4x4
Made in the USA 🇺🇸 not like china as most of the manufacturers
Does it have a lift on it?
No, it’s stock
What’s the max speed
I’m not sure on the top speed but if I had to guess, I would say somewhere around 45 - 50mph.
I top out about the same 50 to 55.
I topped mine out like at 85
But I was on the salt flats