just wanna say i totally understand , thank you for your hard work and dedication to your channel ! your content is bar none paid television quality content. stay warm overthere bud we just had a snap of cold come thru headed towards ya.
My sincerest apologies you not only Greg a but also andy and the entire viewing audience. I was planning on changing of entire scope of the Greg A channel but due to an abundant amount of traffic and a hemorrhoid I was forced to take another route home. In closing I will say. I will be on the Greg A channel soon enough!
Love Marks 03... makes me miss my old 05 which was also CCLB blue/silver. Those are great trucks. Thumbs up on Amsoil Severe Gear... run that in all my rigs... fantastic stuff!
Gotta say the white 03 is beautiful. But I have to say, if I had put that amount of work into the truck I would have done the 06 and up front end swap. Still a beautiful build though.
At 1:30 that’s only a couple leafs I notice. I’m use to having 9 leaf springs in the back of my company truck haha. I think there’s 5 leaf springs in the back.
The front ones are just basic aftermarket lights that's I smoked myself and the taillights are the stock ones that I also smoked along with the fog lights I just mix a little black in the clear coat wet sand the ligh and clear it until I'm happy with the amount of tint on them
This is a related question. I’m trading my car off to my dad for an 03 Ram 2500 Hemi. I’ve always wanted a Hemi, I’ve always wanted a dodge and I love that body style. If I wanted to repaint it, how would I go about that? I have zero paint and body experience or tools. This truck has a new engine but the exterior paint is shot. The only body damage is the tailgate and a very small spot of surface rust (paint bubbling) on a fender about the size of a silver dollar. Just curious too if you guys have dealt with the cracked dash and how?
Yeh buddy I put them on my 07 the day I picked it up from the dealer brand new they really work lol I just have to trim these so I can access the ball release
Dustin_O oh alright, yeah I’ve always been wondering lol he seems to have a lot of free time and toys so figured he had a pretty good job. Thanks, I’ve been trying to find the video he says it in I know he made one forever ago but he only said he will save it later for another video and I’ve never seen that video yet so.
Andrew Saam honestly it's probably either someone who works at a shop nearby along with the rest of them or it's project trucks from a shop or just trucks in line for that shop. Sometimes people aren't in a hurry to have a dead truck fixed if it's not needed and it'll be cheaper for the shop to just work on it when they aren't busy
"I didn't really want to boar you guys with putting this all back together" Greg... really? Just about all of us originally subscribed to watch you work! Not as a slave type thing, but I mean I enjoy watching you work on your truck and I wish you would have just shown a little more and not so much talking still love your videos though!
for a brand call wrench works you don't show it anymore all you do is show the part on the truck then talk about for 20 minsyou videos are not the same anymore big thumbs down
don't shit on him man ! give him a chance to adjust to your take on the video !!! i get it man i just hit him with a longer content less edit reply but for you to shit on his character is pretty shame man he is doing what we ask just reword it positive and i might get behind your point bro . keep the blue oval .
Once again a video with almost no work in it. Half the video was pictures. Go back to videos of working on the trucks. That’s what we like to see. I’ll say it again I love the videos when you are working on the trucks and telling us bout it. Go back to the videos you were making. Ever since you got the shop you have done less videos with less working on the trucks. You told us it would be the complete opposite.
Don't forget, Greg does this with or without TH-cam. He works a day job and basically does this for kicks. I do somewhat agree tho and like to see basic PM stuff Recorded too. I think, he thinks most guys see it as boring. Personally I don't.
Excuse the shortness of this video!!! We were in "get it done" mode!!! Have a great night guys!!!
GREG_ALBERALLA mister maro better reschedule his burnouts
just wanna say i totally understand , thank you for your hard work and dedication to your channel ! your content is bar none paid television quality content. stay warm overthere bud we just had a snap of cold come thru headed towards ya.
What type of anti wrap bars are you guys using? I keep braking carrier bearings and I think they will solve that issue.
keep up the videos greg and drive on
Your videos are still A -1 in my book thanks for posting !!!!!!
Damn it. I love my Duramax, but a manual, long bed Cummins is for sure my next truck. I miss shifting my own gears and I'm sick of short beds.
My sincerest apologies you not only Greg a but also andy and the entire viewing audience. I was planning on changing of entire scope of the Greg A channel but due to an abundant amount of traffic and a hemorrhoid I was forced to take another route home. In closing I will say. I will be on the Greg A channel soon enough!
That’s a real nice ‘03 Cummins clean nice work! I like to see people take pride in there ride.
Love Marks 03... makes me miss my old 05 which was also CCLB blue/silver. Those are great trucks. Thumbs up on Amsoil Severe Gear... run that in all my rigs... fantastic stuff!
Good buddy Mark killed it. Beautiful rig
Get him in more videos! That ride is SWEET!!!!
Marc is an awesome artist and friend to the crew and a solid dude
Marks truck is sharp. Making me want to do more work to mine
Can you do a review of those rotors and anything else you upgraded on the brakes after towing? I’m very interested to find out if those helped?
That white 03 is badass
I have a front pinion seal leaking as well, can’t wait for the video to be posted on how to replace it. Keep up the good work
Such a satisfying transformation 👌🏼
Greg please record doing all of the other maintenance stuff. A lot of us like it. I know I do haha
That is one awesome rebuild!! I love the truck lookin sweet!!
Man 3gen looks good he did a dame good job
That white dodge is beautiful
Greg I could have sworn you weren't posting today. Now I'm glad
That's 03 is just perfect that is the exact truck I'm looking to buy when I finish college as an a&p mechanic next September
That white truck is now ready for the oil patch in the Permian Basin. Black ones like my '04, don't do to well in the West Texas sun.
Awesome awesome video Greg A, those new brakes look sick lol, and snap on Ryan’s truck looks better than new lol
My god, that’s a clean truck
Gotta say the white 03 is beautiful. But I have to say, if I had put that amount of work into the truck I would have done the 06 and up front end swap. Still a beautiful build though.
What a build!!! Love be the resto
Yooo wrench workz crew#cummins squad :) I love the video as usual.
I k I
Mark bought that truck right down from my house, I recognize the location in one of the pictures
Look at all those fords lined up outside waiting for the Greg A treatment!
At 1:30 that’s only a couple leafs I notice. I’m use to having 9 leaf springs in the back of my company truck haha. I think there’s 5 leaf springs in the back.
probably relies on the airbags for load support.
Airbags !!!!
Are you going to MotoRama and is the drag truck gonna be ready by then
Would like to see the install of the pinion seal when you get around to it. I have to change one out and have no clue what im doing. lol
I like all the ford products outside the shop
You can fix the holes on the first gen from the trim with a tig welder
What do those traction bars do? They look really cool! Lol
Wait thought the 08 was getting ball joints as well !!
Please do a detailed video on the pinion seal!
How big are the wheels and tires on the white truck?
im starting to like the quad cab long beds.
How much for that truck if I may ask? Thanks Greg great video as always!
Ian and I sent you all the seals you needed to fix the rear end and front pinion seal
Perfect! Ill use those then!! Thanks!
That third gen restore is insane.
where did you get those rotors/pads?
What head lights and tail lights do you have on the white 3rd gen
The front ones are just basic aftermarket lights that's I smoked myself and the taillights are the stock ones that I also smoked along with the fog lights I just mix a little black in the clear coat wet sand the ligh and clear it until I'm happy with the amount of tint on them
Marc Ricco thanks
Now THAT cummins is fucking bad ass keep it up 👍
8 minutes 1.1k views that's awesome
excited to see another truck on the channel!
IG @ extended_crew
Keep us updated on those rotors
Hey I was watching Cleetus McFarland and saw the drag truck wen u just bought it
It won’t let me add a pic from my phone
3k more subs until 100k Greg!!!
This is a related question. I’m trading my car off to my dad for an 03 Ram 2500 Hemi. I’ve always wanted a Hemi, I’ve always wanted a dodge and I love that body style. If I wanted to repaint it, how would I go about that? I have zero paint and body experience or tools. This truck has a new engine but the exterior paint is shot. The only body damage is the tailgate and a very small spot of surface rust (paint bubbling) on a fender about the size of a silver dollar. Just curious too if you guys have dealt with the cracked dash and how?
Notification squad
I left vehicle virgins when I seen the notification lol
Where has Mr. Sendit been?
Mtcproductions 28 working on the blue truck
Greg what size exhaust does the 03 white truck have on it
Jay Tatman it's a 5" straight from the turbo back mbrp
Off the race 06
I need to do this to my truck, but he did all the body work and no wheel well liners out back?!
Marc Ricco good! Lol they're saving my truck from the dodge rot. Love the truck man!
Yeh buddy I put them on my 07 the day I picked it up from the dealer brand new they really work lol I just have to trim these so I can access the ball release
Damn dude why didn’t you show us how to put the rear seal and the work you did on the rear brakes
What’s your normal job?
mcbcincy19 he does drilling for an oil company I think. He's talked about it before. I just forget which video.
Dustin_O oh alright, yeah I’ve always been wondering lol he seems to have a lot of free time and toys so figured he had a pretty good job. Thanks, I’ve been trying to find the video he says it in I know he made one forever ago but he only said he will save it later for another video and I’ve never seen that video yet so.
*Patiently waits for 1080p* 😕😕
its not his fault, its an error on TH-cams side..
Cyrus the Great I didn’t say it was his fault..?
What's up with that white superduty? It's always sitting there.
Andrew Saam it's a ford what else do you expect lol they ain't in a rush to pull it into the shop to fix it
🤔
It looks pretty nice. Maybe it's something that could be bought cheap.
Andrew Saam honestly it's probably either someone who works at a shop nearby along with the rest of them or it's project trucks from a shop or just trucks in line for that shop. Sometimes people aren't in a hurry to have a dead truck fixed if it's not needed and it'll be cheaper for the shop to just work on it when they aren't busy
Yeah I figured the same. It's just been in the same spot since he moved into the new shop. Im a sucker for a white superduty. Lol.
Not to sound stupid but how do u bleed breaks
Wv Country boy TH-cam! Look it up!
Asking how to do something is never stupid!
(For the most part)
There are tons of how to videos on here.
sweeeeeet!!!
What kind of intake elbow on the 03
It's pusher intake my friend
Thanks man
Nice!!
Are you going to ucc
Wash the 08 please
Who would park that nice ass gmc in that junk yard across the drive. 5:18
IG CREW!!
Yeet
I hope this motivated you to lift your truck a bit higher with some bigger tires
Que pena que nao tem legenda kkkkk
New truck tomorrow?
anatha one
Why is there always some weird amount of dislikes? Just 15-20 people always lol
first
all you videos are to short
"I didn't really want to boar you guys with putting this all back together" Greg... really? Just about all of us originally subscribed to watch you work! Not as a slave type thing, but I mean I enjoy watching you work on your truck and I wish you would have just shown a little more and not so much talking still love your videos though!
First 😂
The quality of the footage was trash
its not his fault, its an error on TH-cams side..
I understand it was TH-cams fault
First?
for a brand call wrench works you don't show it anymore all you do is show the part on the truck then talk about for 20 minsyou videos are not the same anymore big thumbs down
don't shit on him man ! give him a chance to adjust to your take on the video !!! i get it man i just hit him with a longer content less edit reply but for you to shit on his character is pretty shame man he is doing what we ask just reword it positive and i might get behind your point bro . keep the blue oval .
Once again a video with almost no work in it. Half the video was pictures. Go back to videos of working on the trucks. That’s what we like to see. I’ll say it again I love the videos when you are working on the trucks and telling us bout it. Go back to the videos you were making. Ever since you got the shop you have done less videos with less working on the trucks. You told us it would be the complete opposite.
Speak for yourself. I rather have this to watch then nothing at all
I wasn’t saying the his videos sucked. I like his videos a lot. I watch them everyday. I’m just saying his videos were better before he got his shop.
Don't forget, Greg does this with or without TH-cam. He works a day job and basically does this for kicks. I do somewhat agree tho and like to see basic PM stuff Recorded too. I think, he thinks most guys see it as boring. Personally I don't.