God whoever did that repair is lazy as F! They didn't even bother to clean up the pieces that were reused. There's no excuse/reason for that. Pure laziness. Bad work!
Are you referring to the burned steel clamps across the FETs? Those are probably cadmium coated and not easily cleaned. You can wipe them down, but the black marks will stay. There's nothing wrong with it, just cosmetic.
@@JasonWW2000 yeah it won't do any harm . It's just it doesn't look like a professional job or like it was done by someone that don't care about the quality of work. All it would take is a red scotch bright pad or 600 then 800 wet sand paper,or walnut shell blasted ,or even b)ast it with baking soda rather than sand. Dry ice in a sand blaster would be good also. Anything but leaving it black. It's usually just plain steel since it's just a hold down and not anything that is being used for its thermal properties. It's just holding the fetts snug against the aluminum case. It doesn't need to be anything more than that really. It just bothers me to see that black shit. I would never leave it black for myself or a paying customer. And I don't know I just wouldn't feel like much of a professional if I left it looking like that. That's where I was coming from with that comment.
@@JasonWW2000not only that but all that flux and sloppy soldering job at the bridge which connects the two boards in the center, I personally saw a number of signs that pointed to an unprofessional repair myself 🤷♂️
The noise you heard was the capacitor charging up through the remote when you hooked up your first big wire that’s why you didn’t have the initial big spark like you were expecting
remote isn't grounded so no your close but its grounded trough the rca cables which is bad because that happens when the preamp section of a amp is going out or theres a shotty ground in the amp or car this is why you always make sure your ground is good and is hooked up first its your first line of defense becuase hes lucky the car wasnt on or that amp would of popped alot of thangs attach to them rca cables also that spark is becuase of a loud aka the caps pulling charge trough power in order to complete a circuit it needs to be connected to ground remote turn is a 12 volt posative wire and had noting to do with it but you was some what close
@Memiselphi Don't connect live wires. Always remove the fuse. Once the wires are installed, run a test light or a 12v bulb across the fuse terminals. That will slowly and safely charge the capacitors.
@@JasonWW2000 that’s not a feasible option with my current application. My fuses are ran behind the stunt wall, so, I can’t disconnect the fuses to power the amp in That manner.
@Memiselphi Okay. Here's the second best option. I'd suggest hooking up the ground first, then use a bulb or test light between the positive cable and the amp to charge up the capacitors. Once the bulb goes out, then hook up the positive cable. That should prevent the usual big spark and any strange noises. Some of those Taramps models require you have the speakers connected before you hook up power.
@@brucecobb7572 no. Not at all. I don’t play my music often. And I don’t play it at terrible hours. Also, I don’t complain about the amount of noise their dogs make around the clock either. So, it’s a level of respect on both sides.
@@michaelrhodes9178 thanks. I still have tuning to do, and it should get a little louder. I also need to get the quarter panels finished and the roof completed. But I’m definitely working on it. Thanks for checking me out. Hopefully you’ll subscribe for future content.
@@K9malinois_dog_love yeah. I still got some work to do, but I just wanted enough mids and highs to keep up with the extreme bass. A lot of systems be too much bass, not enough words. I don’t want that problem.
it was pulling ground trough the rca cables and was charging up the amp which is why it didn't spark and why it made that noise because it was a slow charge
You might benefit from taking that top speaker box off. Half of it's behind the other 2 huge stunt walls anyways. Also it's going to block some of the bass from going to the front and your view from your back window.
@@RyanBassForLife thanks. Im still hacking at it, hopefully by next year spring, it be completed. But, only time will tell. If I find another team, or 3, I’ll walk it. But, I won’t walk it with only 3x it will have to be at least 4 or 6 subs.
Thanks. I’m glad someone appreciates my build. I been receiving hate. Someone said my build looks atrocious because of the placement of my mids and highs. And the fact that I didn’t run 4 of whatever he would have done.😒
@@Memiselphi yeah cause usually somebody will connect the -1st and then do the positive and that’s where you get the loud pop. If you just do the positive first it’s gonna charge the caps up.
@@davntelisha19 thanks. And I still haven’t tuned it again yet. It still has more to give. I’ll be making an update video with more things that I’m doing to the build. Hopefully you’ll subscribe and be around for future updates.
@@davntelisha19 it’s ok. It’s been giving me issues, since I purchased it. If it blows again, it will be getting sold, and I’ll be switching to half bridge.
Yeah I got a Cadillac Escalade too just like yours I got 4 10 inch beyma speakers for my voice and 4 beyma on my doors 6 1/2 I got 5k taramp and 2 skar audio 12 inch subs with a 8k taramp and another taramp 800/x4 for my doors and tweeters 3 battery’s and upgraded alternator with 4 o gauge wires running from the hood and back it sounds pretty good have a pioneer radio 8200nex
They are probably cadmium coated and not easily cleaned. You can wipe them down, but the black marks will stay. There's nothing wrong with it, just cosmetic.
@@JasonWW2000 but, it does present as lazy. A lot of the smoke damage could have easily been cleaned. Not everyone has a high level of pride when it comes the quality in how they represent their repairs.
@Memiselphi I don't think that particular thing presents as lazy. He may have tried to clean it and was unsuccessful. If you were able to wipe it off, then I'd agree it was lazy. I usually look for things such as left over flux residue, crooked soldered components, etc... as signs of being lazy. I could only see so much in the video, but that repair looked pretty good to me. 👍
@@jeremyfancher this was a 3rd party repair. It’s outside of the warranty. And it wasn’t worth shipping it out of state for repairs from the original repair person, because I would have had to cover the shipping there and back, and all repairs and parts, which would have more than doubled the repair costs. As for the quality of the repair, that falls on the person who did the repairs, and if he’s comfortable with the world seeing his quality of work like this, then that’s on him. I have my own thoughts, but I choose not to address them publicly. If it blows again, I’ll be switching over to something else.
@@jeremyfancher 16 mids are wired in series to the left side, 16 is wired to the right side, and the tweeters are done the same way. Each of the boxes are wired in series each. For example. The top box of the left channel and the bottom box is the right channel. So, I can get all of the sound that comes out of the left and right channels when it comes to certain songs that fade instruments to the left or the right side.
People are right about connecting the grounds first man. Why? Because the power will go through any other wires already connected, including the speaker wires and or the rca wires. You charged the caps up when installing the positive first and it had no ground to go so maybe it went thru the speakers
@@IROCPOLO94 I remember you. I seen you at several shows some years ago. I haven’t seen you around recently though. But, definitely. I know I’m not on your level yet. You and Damon been light years ahead of me.
@Memiselphi Good we remember each other, I been out the way lately and with work but I'll be around again next year for sure keep them videos coming my guy 💪
I believe that strange noise you was hearing was just the caps charging inside the amp bruh, n once they were all charged up then it went away but I deff could be wrong cause it's hard to say without standing right there hearing it for myself... What that amp-dude say bout it?
Braaahhh!!! Great job!!! #MajorMajorMajorPROPS 💯% What's the name or link to the track that was demoed towards the end of the video? It was flipping knocking!!
I'm trying to make sense of the amount of little speakers you have crammed into that space when about 4 15s or 18s would not only looked better but I'm sure sound better too.
How are your videos doing as far as views? I wanted to give you some feedback. I have not watched many of your vids lately due to how long they are. I enjoy car audio related stuff, but a long video on installing a head unit is a tough ask. I would suggest editing down the videos to like 10 or 15 minutes. I'd be more likely to watch it. If your longer videos are getting lots of views, then keep doing it and ignore what I said. Lol. Later.
Well, it’s up and down. Not enough data to specifically target what people want and how long they want it yet. It’s a roller coaster. I’m still trying to figure it out.
@Memiselphi I just noticed that auto correct messed up my comment. I was saying I have NOT watched many videos lately due to the length. Anyway, it looks like your getting views and lots of comments. So thats good. 👍
@@Memiselphi there is its grounds first because you can pull ground trough rca cables and damage other parts of the system like amps eqs radios and so forth
The subwoffers from the United States are better than ours from Brazil. but the amplifiers in Brazil are better than those in the United States.. have you seen the sound projects in Brazil the store is called deboxe
@@andrefelipe-kb3fd no. I haven’t seen the sound projects in Brazil. But, most amps in the United States isn’t manufactured in the United States. 90 plus percent of amps are imported. The United States doesn’t produce much of anything in the States. That’s the part that sucks. We don’t know how Us quality is, because we don’t have any products being produced here.
@@jeremyfancher yeah. And Korean amps have them Inflated prices! Ain’t too many Korean amps that’s powerful, and cost efficient. Maybe the D4S Jp amps. I’m thinking about switching to them, if this 30k kick the bucket again.
@@vrmrentalspressurewasher2842 yeah. I still don’t know what it was. Some people in the comments are claiming that it was the rail caps charging up or something. They are probably right. I don’t know.
@@K9malinois_dog_love 🤣😂🤣 I don’t know how many Rms the human eardrums are, but mines been eating the pressure! I been pass 600rms over a decade ago! My system is peanuts compared to so many people out here. I’m not even scratching the surface. At least in my opinion. I definitely thank you for checking out the content and hope you’ll subscribe for future content.
See i have 4 15s wdx db drives g5s connected to a taramps 12000.1 MD 1 ohm . I have 2 optima battery's in front of the hood and 1 big kinetic battery in the back all zero gauge wire big 3 done and a mechamen 380 amp alternator but my volts still go down with too much bass I can't find the problem.?
Taramps been designing their amps like this. It’s a full bridge design, so I guess they figured they can get away with only dual inputs. And they are not 4/0
It’s a 30k! If they could have made it that small, they would have! Have you had the bass 15k? Or the Md 12k? It’s only so small they can design a 10k plus amp.
You playing people are gonna see everything so you might as well be straightforward with them whoever you let inside that amp soldering is horrible and most of the hardware can be easily replace at and radio shack or even fabricated for penny’s why not so why not do it right. The power and remote wire needs to be ran separate meaning you can’t run them next to each other you’ll get a humming noise, I’d be very suspect of that repair on the amp, with something running that amount of wattage it could be very dangerous
@@JasonWW2000 I have a 504ah Cmax of the large cells. At full power with the 30k, I only drop .3 to .4 of a volt max. I hardly ever see 14 volts. I stay at 15 plus. I charge at 15.8. And I have dual mechman 400 amp alternators.
@Memiselphi taramps don't like anything over 15.5volt imo, over volts the rails the fetts pop, these don't have the protective circuitry as the smaller amps like the md12k and the HD to limit current. What are you wired to on the Amp?
@@windytokes I never heard that before. Even Taramps website states that the amps operate from 9 to 17 volts. So 15.8 to 16 volts shouldn’t be an issue running this amp. And I’m wired to .67 ohm.
@@aaronwilkins96 why? There isn’t a specific order on which you have to hook up the power and ground to the amplifier. Unless you know something I don’t.
Yesss listen anytime you have a hot wire consistent always ground first because you will cause more damage than you think also that would give you ya idea of which one is which that’s why it’s important to ground first
@@stateofemergency4966 unfortunately not. I’ve had it for about 5 years, and I got different vehicles I’ll be putting systems in, so it definitely has a home.
You hook up everything so wrong!!!!! You always hook up the ground first then battery, remote then RCA....... see when you hook battery up first it's looking for a ground to come on always hook up the RCA's very last for fry your Amp 22 years talking BASS OUTLAWS OFFICIAL TECH AND INSTALLER
Well, I don’t know what kind of meters that can be used to measure it. The Taramps dealers that tuned my amp, did the calculations while I was playing one of my rebassed songs, because that particular song made my woofers smell after 3 minutes or so, and they calculated it at 19k plus at that time. So, my subs are getting more than the 5k rms rating that they can handle. I still don’t understand how some people run double to triple the amount of power to their subs, without them smelling. But I gave my subs an extra 1500rms each, and they started smelling. Not sure if it was a good smell or bad smell, but I don’t like any smell, so I turned it down.
@@LeeBoyd-g3k Escalade Update! Bass 30k Is Destroying Everything! More Power Has Severe Consequences! MUST WATCH! th-cam.com/video/2rUrSbqkOvg/w-d-xo.html
Do you really go screws through your roof? 🤦 Pl my guy pl... Why would you ruin a beautiful Escalade booger it up like that? If you would stop rushing your installs or pay someone who actually knows what yhey are doing you might not be blowing amps and subs, speakers like you do .. Never seen so much equipment you go through that doesn't make it!
@@PeterFeltersnatch852 it’s not screws! Those are weld points from the added bracing. And I had the moonroof deleted. It’s going to get body work and repainted back black from the person who did the job. I just have to take him the vehicle. Where do you see screws? You don’t. You been assuming a bunch of things since you came to my channel. It’s not a good look.
@@jeremyfancher yeah. He’s been commenting negative comments on my videos stemming a month back. He even posted a negative comment on a video that I recently posted that had absolutely nothing negative about it, and I told him he needs therapy, and his comments are not wanted here, for the 2nd time. He promised to never post on any of my future videos from this point. I actually screenshotted the conversation, and made an entire video about it, as a teaching moment for the world to see. It’s actually sad how he’s carries himself online.
Gave you a like. 19k views in 2 weeks. Lots of car audio enthusiasts out’chere!
@@gaffle-411 yeah. Thanks. I’m hoping to keep you and everyone else entertained. Thanks for liking and checking out the content.
This thing is nasty 👍😁😎
@@makepeace2850 thanks. I’m still breaking things! I recently just started splitting my driver’s side quarter panel. It’s all bad.
@Memiselphi 🤣wow.
God whoever did that repair is lazy as F! They didn't even bother to clean up the pieces that were reused. There's no excuse/reason for that. Pure laziness. Bad work!
Agreed
Are you referring to the burned steel clamps across the FETs?
Those are probably cadmium coated and not easily cleaned. You can wipe them down, but the black marks will stay. There's nothing wrong with it, just cosmetic.
@@JasonWW2000 yeah it won't do any harm . It's just it doesn't look like a professional job or like it was done by someone that don't care about the quality of work. All it would take is a red scotch bright pad or 600 then 800 wet sand paper,or walnut shell blasted ,or even b)ast it with baking soda rather than sand. Dry ice in a sand blaster would be good also. Anything but leaving it black. It's usually just plain steel since it's just a hold down and not anything that is being used for its thermal properties. It's just holding the fetts snug against the aluminum case. It doesn't need to be anything more than that really. It just bothers me to see that black shit. I would never leave it black for myself or a paying customer. And I don't know I just wouldn't feel like much of a professional if I left it looking like that. That's where I was coming from with that comment.
@@JasonWW2000not only that but all that flux and sloppy soldering job at the bridge which connects the two boards in the center, I personally saw a number of signs that pointed to an unprofessional repair myself 🤷♂️
@@kevinAuman1 He commented that the black charring wiped right off.
So I've revised my thoughts. The repair person was lazy.
The noise you heard was the capacitor charging up through the remote when you hooked up your first big wire that’s why you didn’t have the initial big spark like you were expecting
@@TiaShaw. you may be right. I never had that happen before! It through my all the way off!
remote isn't grounded so no your close but its grounded trough the rca cables which is bad because that happens when the preamp section of a amp is going out or theres a shotty ground in the amp or car this is why you always make sure your ground is good and is hooked up first its your first line of defense becuase hes lucky the car wasnt on or that amp would of popped alot of thangs attach to them rca cables also that spark is becuase of a loud aka the caps pulling charge trough power in order to complete a circuit it needs to be connected to ground remote turn is a 12 volt posative wire and had noting to do with it but you was some what close
@Memiselphi Don't connect live wires. Always remove the fuse. Once the wires are installed, run a test light or a 12v bulb across the fuse terminals. That will slowly and safely charge the capacitors.
@@JasonWW2000 that’s not a feasible option with my current application. My fuses are ran behind the stunt wall, so, I can’t disconnect the fuses to power the amp in That manner.
@Memiselphi Okay. Here's the second best option.
I'd suggest hooking up the ground first, then use a bulb or test light between the positive cable and the amp to charge up the capacitors. Once the bulb goes out, then hook up the positive cable.
That should prevent the usual big spark and any strange noises.
Some of those Taramps models require you have the speakers connected before you hook up power.
I know the old lady next door is cursing you out😂😂😂
@@brucecobb7572 no. Not at all. I don’t play my music often. And I don’t play it at terrible hours. Also, I don’t complain about the amount of noise their dogs make around the clock either. So, it’s a level of respect on both sides.
Straight pressure 😤🔥🔥🔥it’s ah go!!
@@michaelrhodes9178 thanks. I still have tuning to do, and it should get a little louder. I also need to get the quarter panels finished and the roof completed. But I’m definitely working on it. Thanks for checking me out. Hopefully you’ll subscribe for future content.
Nice video, more interested in seeing the subs flex vs vehicle body panels. Thx for posting.
I got you. I’m always asking for input on what yall want to see in videos.
A Metallica concert 🔊 set up inside of an SUV 🔥🔥🔥
@@K9malinois_dog_love yeah. I still got some work to do, but I just wanted enough mids and highs to keep up with the extreme bass. A lot of systems be too much bass, not enough words. I don’t want that problem.
@ the more bass the more mids and highs, that’s how it works.
@ that’s how it supposed to be, but a lot of people miss the memo. Or too cheap to put money into their systems.
it was pulling ground trough the rca cables and was charging up the amp which is why it didn't spark and why it made that noise because it was a slow charge
The RCAs were not connected. Just the remote.
@@Memiselphi then ots might of been feed back to another amp maybe mids and highs
You might benefit from taking that top speaker box off. Half of it's behind the other 2 huge stunt walls anyways. Also it's going to block some of the bass from going to the front and your view from your back window.
It’s a temporary install. And those boxes aren’t blocking any air from traveling to the front.
@@Memiselphi that's good look nice and I bet it sounds amazing. Great job at building a very nice stereo 😃👍
@@RyanBassForLife thanks. Im still hacking at it, hopefully by next year spring, it be completed. But, only time will tell. If I find another team, or 3, I’ll walk it. But, I won’t walk it with only 3x it will have to be at least 4 or 6 subs.
Sweet wall!! Dope build
Thanks. I’m glad someone appreciates my build. I been receiving hate. Someone said my build looks atrocious because of the placement of my mids and highs. And the fact that I didn’t run 4 of whatever he would have done.😒
I hook my remote wire last. Try that next time and you might not get that sound from your amplifier.
Thanks for the tip
Yes! you really know what you are doing 😊❤
I try
❤❤
Awesome brother
@@ShaanBrown-qo3fo thanks bro.
I bet it was those caps in the amp...it has quite a few in there...
Clean af
@@roblinprasad528 thanks.
That's the caps charging up
Through the power cable only? I never heard anything Iike that before.
@@Memiselphi yeah cause usually somebody will connect the -1st and then do the positive and that’s where you get the loud pop. If you just do the positive first it’s gonna charge the caps up.
@@Memiselphi you also gotta think that is a massive amp so it’s gonna make some funky noises while the rails charge up
Memiselphi, what's your electrical like to support the 30k..what brand battery/batteries are you using??
@@orlandoshorter3647 504ah Cmax large cells, 2 mechman 400 amp alternators.
www.tiktok.com/t/ZTFTrBgpM/
that thing is a MONSTER
@@B4evrtru-26 it definitely is.
Dam bro I can feel the bass on my phone dam that shit hitting hard good shit bro dam that 30ak doing some damage
@@davntelisha19 thanks. And I still haven’t tuned it again yet. It still has more to give. I’ll be making an update video with more things that I’m doing to the build. Hopefully you’ll subscribe and be around for future updates.
@@Memiselphi yeah that shit sounds amazing you definitely flexing big bro good shit that 30k is a beast
@@davntelisha19 it’s ok. It’s been giving me issues, since I purchased it. If it blows again, it will be getting sold, and I’ll be switching to half bridge.
Yeah I got a Cadillac Escalade too just like yours I got 4 10 inch beyma speakers for my voice and 4 beyma on my doors 6 1/2 I got 5k taramp and 2 skar audio 12 inch subs with a 8k taramp and another taramp 800/x4 for my doors and tweeters 3 battery’s and upgraded alternator with 4 o gauge wires running from the hood and back it sounds pretty good have a pioneer radio 8200nex
@@davntelisha19 oh, ok. I literally did a video on trying to repair my Nex8200 that was in my Buick Century during a lithium fire.
whoever fixed that did a poor job they didn't even clean the burnt crap off
Man I promise I was going to say the same thing you beat me to the comment.
My repairs never leave in that condition. That's a fact.
They are probably cadmium coated and not easily cleaned. You can wipe them down, but the black marks will stay. There's nothing wrong with it, just cosmetic.
@@JasonWW2000 but, it does present as lazy. A lot of the smoke damage could have easily been cleaned. Not everyone has a high level of pride when it comes the quality in how they represent their repairs.
@Memiselphi I don't think that particular thing presents as lazy. He may have tried to clean it and was unsuccessful. If you were able to wipe it off, then I'd agree it was lazy.
I usually look for things such as left over flux residue, crooked soldered components, etc... as signs of being lazy. I could only see so much in the video, but that repair looked pretty good to me. 👍
@@JasonWW2000 I did. With my finger, with 0 effort. It could have definitely been cleaned.
That pressure!!!!!!
I’ll be cranking it up some more soon.
Dope bro
Thanks 💯
man this is a hell of a system those all those mids are they split in middle for stereo sound?
@@jeremyfancher this was a 3rd party repair. It’s outside of the warranty. And it wasn’t worth shipping it out of state for repairs from the original repair person, because I would have had to cover the shipping there and back, and all repairs and parts, which would have more than doubled the repair costs. As for the quality of the repair, that falls on the person who did the repairs, and if he’s comfortable with the world seeing his quality of work like this, then that’s on him. I have my own thoughts, but I choose not to address them publicly. If it blows again, I’ll be switching over to something else.
@@jeremyfancher 16 mids are wired in series to the left side, 16 is wired to the right side, and the tweeters are done the same way. Each of the boxes are wired in series each. For example. The top box of the left channel and the bottom box is the right channel. So, I can get all of the sound that comes out of the left and right channels when it comes to certain songs that fade instruments to the left or the right side.
People are right about connecting the grounds first man. Why? Because the power will go through any other wires already connected, including the speaker wires and or the rca wires. You charged the caps up when installing the positive first and it had no ground to go so maybe it went thru the speakers
Upgrading back to 30k that sounds funny.
Time for a Korean board them taramp junk my G
@@IROCPOLO94 I’m not there just yet! I’m giving the 30k 1 last shot, and if it blows again, it’s out of here.
@Memiselphi I hear that I gotta hear your truck soon we in the same city my guy
@Memiselphi I'm running 2 crossfire xsv4 18s on crescendo 17k, we gone trade demo sometime in October busy otr with work
@@IROCPOLO94 I remember you. I seen you at several shows some years ago. I haven’t seen you around recently though. But, definitely. I know I’m not on your level yet. You and Damon been light years ahead of me.
@Memiselphi Good we remember each other, I been out the way lately and with work but I'll be around again next year for sure keep them videos coming my guy 💪
Nice 1
@@beemackin2316 thanks. I’m trying.
Nice
Thanks.
Who did the clip meter? I need to do mine for my 15ks
Shoot me an email. Memiselphi1@gmail.com
CRRAAAAZZZZEEEEH
@@donnavonwisdom2740 what part?
I believe that strange noise you was hearing was just the caps charging inside the amp bruh, n once they were all charged up then it went away but I deff could be wrong cause it's hard to say without standing right there hearing it for myself... What that amp-dude say bout it?
All he said was, that’s strange. He never said anything else about it
Braaahhh!!! Great job!!! #MajorMajorMajorPROPS 💯% What's the name or link to the track that was demoed towards the end of the video? It was flipping knocking!!
@@babiboib7 it’s unreleased. It’s one of my old instrumentals I made.
@@babiboib7 and thanks for checking me out as well. Hopefully you’ll subscribe for future content.
@@Memiselphi Oh ok cool it knocks 💯
@@Memiselphi It's no problem, and yes I've BEEN subscribe to your channel 💯
@@babiboib7oh, ok. Well, thank you for continuing to check out the content. Hopefully I keep providing you entertainment and possibly some knowledge.
Man that ain't R. Kelly... That's R. Kenny 😂😂😂
@@BIGDADDYLOW777 huh?
Nah that's K. Relly
@@dlc2087 who’s R Kelly?
I knew someone was gonna say R Kelly 😂
Good video ! Bruh I’m sorry but ,you look like R . Kelly lil cousin installing systems frfr
Thanks, and wow!
How did you get a external clip light for it?
My amp repair person added it to the board. It’s his own design. When I hook it up, I’ll upload the video, showing how it works.
@@Memiselphi hell yeah who's your amp tech I also have a bass 30k and it's gonna be in a trunk so I could really benefit with that clip light up front
@@BlindBassHead send me an email, and I’ll send you his facebook link. Memiselphi1@gmail.com
Love the setup .. what's the name of that song you was playing
@@twalker3551 it’s one of my personal instrumentals. It’s unreleased.
@@Memiselphiplay that jean luc ponty- modern times blues and tell me what you think
I'm trying to make sense of the amount of little speakers you have crammed into that space when about 4 15s or 18s would not only looked better but I'm sure sound better too.
@@suzrmx250 I don’t do 18s. And every ones build isn’t going to be the way (you) would do it.
Ninja,start listening to music like chicos Brazil especially 😅😅😅😅😅😅😅😅 loud ass trash!! Kicker/punch/jbl
@@taftkid7365 huh?
The little speakers playing higher frequencies? He installed so many so it can be loud and keep up with the bass.
@@JasonWW2000 l saw mostly mids and highs l saw no base unless he was hiding 12s somewhere
Definitely gotta have power disconnected while connecting
@@davidwoody4040 my build doesn’t afford me that luxury. The fuses are behind the wall.
GOD,,,,,,,,,,,,,,,,,,,, DAM
@@___.___ertre thanks for checking me out.
How are your videos doing as far as views?
I wanted to give you some feedback.
I have not watched many of your vids lately due to how long they are. I enjoy car audio related stuff, but a long video on installing a head unit is a tough ask.
I would suggest editing down the videos to like 10 or 15 minutes. I'd be more likely to watch it.
If your longer videos are getting lots of views, then keep doing it and ignore what I said. Lol. Later.
Well, it’s up and down. Not enough data to specifically target what people want and how long they want it yet. It’s a roller coaster. I’m still trying to figure it out.
@Memiselphi I just noticed that auto correct messed up my comment. I was saying I have NOT watched many videos lately due to the length.
Anyway, it looks like your getting views and lots of comments. So thats good. 👍
I always hook up my grounds first and unhook them last.
@@sethgt1234 I never heard of any specific order of when power and ground is added.
@@Memiselphi there is its grounds first because you can pull ground trough rca cables and damage other parts of the system like amps eqs radios and so forth
@@fxgamer-11ytI always hook rca cables last for that reason
I almost thought you was going to damage your speaker with those brackets at first.
It was definitely a nuisance lining it up for sure.
The subwoffers from the United States are better than ours from Brazil. but the amplifiers in Brazil are better than those in the United States.. have you seen the sound projects in Brazil the store is called deboxe
@@andrefelipe-kb3fd no. I haven’t seen the sound projects in Brazil. But, most amps in the United States isn’t manufactured in the United States. 90 plus percent of amps are imported. The United States doesn’t produce much of anything in the States. That’s the part that sucks. We don’t know how Us quality is, because we don’t have any products being produced here.
@@MemiselphiIve Always had good luck with Korean amps im in michigan too benton harbor area
@@jeremyfancher yeah. And Korean amps have them Inflated prices! Ain’t too many Korean amps that’s powerful, and cost efficient. Maybe the D4S Jp amps. I’m thinking about switching to them, if this 30k kick the bucket again.
Men i not even there and i was wen i heard dT noise tank god it didnt blow
@@vrmrentalspressurewasher2842 yeah. I still don’t know what it was. Some people in the comments are claiming that it was the rail caps charging up or something. They are probably right. I don’t know.
am i the only one that noticed the healthy clone in the home depot bucket?
@@mitchellclark6448 I’m clueless here. What do you mean?
@@Memiselphi in majority of the video just outside the truck right of the screen is a healthy happy ganja plant
@@mitchellclark6448 oh! My mother likes to raise (healthy pharmaceutical rose bushes) as a hobby. 😏
@@Memiselphi i support that entirely was just saying it looks well done
SIZE MATTERS😂
@@Punaterro unfortunately in this application, it does! 😒
What is the average human ear drums are rate at Rms 😂😂😂😂😂
My left ear can’t keep up with a 600rms and you got 30k good lord.
@@K9malinois_dog_love 🤣😂🤣 I don’t know how many Rms the human eardrums are, but mines been eating the pressure! I been pass 600rms over a decade ago! My system is peanuts compared to so many people out here. I’m not even scratching the surface. At least in my opinion. I definitely thank you for checking out the content and hope you’ll subscribe for future content.
@@Memiselphi that’s insane bro I’m sure it’s sounds amazing of course the camera mic won’t ever do any justice to the way it truly sounds.
@ it definitely doesn’t. It sounds decent to me. My mids and highs are pretty cheap. I just got 32 mids, 16 super tweeters ran on 4 amps.
Look like Rkelly
Man a $10k amp going to the mfg if it blew aint no way.
@@veelink6345 it’s a 30k, and it’s outside of warranty. You’re going to mail it to Brazil to who? And for what? To give them back a free amp?
What voice amp do u have brotha .?
@@edgarmendez2597 2 Taramps Hd 3ks and 2 arc Audio 4 channels.
@Memiselphi nice brotha I got a question for u from ma system see if u could help me out brotha.?
@ sure. What is it?
See i have 4 15s wdx db drives g5s connected to a taramps 12000.1 MD 1 ohm . I have 2 optima battery's in front of the hood and 1 big kinetic battery in the back all zero gauge wire big 3 done and a mechamen 380 amp alternator but my volts still go down with too much bass I can't find the problem.?
@ not enough batteries for a 12k. That amp is starving for power.
How in the world can a 30k amp only have two inputs lol... plase tell me they are 4/0?
Taramps been designing their amps like this. It’s a full bridge design, so I guess they figured they can get away with only dual inputs. And they are not 4/0
Name of the song playing ?????
It’s not available to the public. It’s one of my instrumentals that’s unreleased.
Who fixed your amp?
@@boomboxmike5838 a guy named Nathan, from Warren Michigan.
Sparks those are your caps charging up!!
It didn’t spark. It just made that noise through the system and scared the hell out of me! 😂
Who's your amp repair guy?
@@Mr.NpK143 a man in Warren Michigan. I’m in the Detroit area.
man what type weed you smoke. if Jerry Rig was a person .....
@@9193967175 explain!
Y the hell the amp so long (pause) they could have shorten it like the 8k
It’s a 30k! If they could have made it that small, they would have! Have you had the bass 15k? Or the Md 12k? It’s only so small they can design a 10k plus amp.
You playing people are gonna see everything so you might as well be straightforward with them whoever you let inside that amp soldering is horrible and most of the hardware can be easily replace at and radio shack or even fabricated for penny’s why not so why not do it right. The power and remote wire needs to be ran separate meaning you can’t run them next to each other you’ll get a humming noise, I’d be very suspect of that repair on the amp, with something running that amount of wattage it could be very dangerous
Who’s playing? Playing about what? And be straightforward with what?
Sig phi me myself and i
@@allenlemott1445 what does this mean?
I mean it’s cool but idk bout this set up 😬do they flip out when you open the back or what, if not this look’s horrendous but to each their own
@@cadillacdeacon where is your system at? I’m curious!
So exactly what made the amp fail?
@@scamchan from the amp repair persons mouth, poor design! That’s all he can sum it up to.
@@MemiselphiMake sure you have plenty of electrical reserve so that the voltage doesn't dip too low.
@@JasonWW2000 I have a 504ah Cmax of the large cells. At full power with the 30k, I only drop .3 to .4 of a volt max. I hardly ever see 14 volts. I stay at 15 plus. I charge at 15.8. And I have dual mechman 400 amp alternators.
@Memiselphi taramps don't like anything over 15.5volt imo, over volts the rails the fetts pop, these don't have the protective circuitry as the smaller amps like the md12k and the HD to limit current. What are you wired to on the Amp?
@@windytokes I never heard that before. Even Taramps website states that the amps operate from 9 to 17 volts. So 15.8 to 16 volts shouldn’t be an issue running this amp. And I’m wired to .67 ohm.
I hoped you grounded first
@@aaronwilkins96 why? There isn’t a specific order on which you have to hook up the power and ground to the amplifier. Unless you know something I don’t.
Yesss listen anytime you have a hot wire consistent always ground first because you will cause more damage than you think also that would give you ya idea of which one is which that’s why it’s important to ground first
Hey whats the song name
@@Imlaunde what song? Time stamp please.
@@Memiselphi the one that you were playing when you were testing.
@@Imlaunde it’s an unreleased instrumental I made. It’s not available to the public yet.
Aight kl
Selling that 10k?
@@stateofemergency4966 unfortunately not. I’ve had it for about 5 years, and I got different vehicles I’ll be putting systems in, so it definitely has a home.
Be careful watch reverse polarity
I’m not that much of an amateur! That’s probably the worst mistakes to make, when running a 30k! It won’t be pretty!
Just make sure always you have the right amount power continuously what you at 16-5 17 volts do know Taramps amplifiers are power hungry
@@aaronwilkins96 I run a 504ah Cmax battery and dual mechman 400 amp alternators. I don’t drop under 15 for the most part.
@@aaronwilkins96 I charge at 15.8 and drop .2 to .4 at full tilt.
Wanna sell that Denali? 😂
@@magic6404 both of my Denalis will be sold soon, I already have buyers, I think.
From junk...to bigger junk...😂😂😂 get a sound digital 35k... way better amp in every way...
@@efeaster3680 everyone has an opinion.
Sell me the old amp
@@TRUCKINGwithP sorry, it’s not for sale. I have other vehicles and new builds on the way.
You hook up everything so wrong!!!!! You always hook up the ground first then battery, remote then RCA....... see when you hook battery up first it's looking for a ground to come on always hook up the RCA's very last for fry your Amp 22 years talking BASS OUTLAWS OFFICIAL TECH AND INSTALLER
@@jessewhiters1594 every thing wrong with? So, besides the negative and positive, what else did I do wrong?
WTF?
It would be interesting to see how much power of that 30k you are using in real time.
Too bad we didn't see that with the 10k as well.
Well, I don’t know what kind of meters that can be used to measure it. The Taramps dealers that tuned my amp, did the calculations while I was playing one of my rebassed songs, because that particular song made my woofers smell after 3 minutes or so, and they calculated it at 19k plus at that time. So, my subs are getting more than the 5k rms rating that they can handle. I still don’t understand how some people run double to triple the amount of power to their subs, without them smelling. But I gave my subs an extra 1500rms each, and they started smelling. Not sure if it was a good smell or bad smell, but I don’t like any smell, so I turned it down.
@@Memiselphi Playing it safe is better than sorry.
30k is good headroom on dropping some good clean bass.
I don't understand why it doesn't have quad inputs?
@@drjd2real because, it’s Taramps! They always halfass things!
@@drjd2real Quad inputs of what?
Taramp’s basura 🚮🤢🤢🤢🤢🤢🤢🤢🤢🤢👎👎👎👎👎👎👎👎👎👎
Everyone is entitled to their opinion.
Is that jaguar for sale
No it’s not.
Hey SHOW US YOUR SUBS
@@LeeBoyd-g3k Escalade Update! Bass 30k Is Destroying Everything! More Power Has Severe Consequences! MUST WATCH!
th-cam.com/video/2rUrSbqkOvg/w-d-xo.html
Do you really go screws through your roof? 🤦 Pl my guy pl... Why would you ruin a beautiful Escalade booger it up like that? If you would stop rushing your installs or pay someone who actually knows what yhey are doing you might not be blowing amps and subs, speakers like you do .. Never seen so much equipment you go through that doesn't make it!
@@PeterFeltersnatch852 it’s not screws! Those are weld points from the added bracing. And I had the moonroof deleted. It’s going to get body work and repainted back black from the person who did the job. I just have to take him the vehicle. Where do you see screws? You don’t. You been assuming a bunch of things since you came to my channel. It’s not a good look.
@@Memiselphi dudes hatin thats all he probably dont have half what you got thats why lmao
@@jeremyfancher yeah. He’s been commenting negative comments on my videos stemming a month back. He even posted a negative comment on a video that I recently posted that had absolutely nothing negative about it, and I told him he needs therapy, and his comments are not wanted here, for the 2nd time. He promised to never post on any of my future videos from this point. I actually screenshotted the conversation, and made an entire video about it, as a teaching moment for the world to see. It’s actually sad how he’s carries himself online.