クモル145の動力化 Install motors into Kumoru145

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 เม.ย. 2021
  • TOMIX 鉄道コレクションのクモル145にモーターを組み込んで動力化しました。
    動力台車はKATOのDT21、パンタグラフはTOMIXのPS16Pを使用しました。
    線路には常にDC5Vの電圧をかけておきます。
    送信機からBluetoothでクモル145を制御し、クモル145からは赤外線信号を出してクル144を制御しています。
    RN4020は組み立てる前にセントラルとペリフェラルの設定をしておく必要があります。
    前照灯・尾灯・室内灯はタクトスイッチで点灯・消灯させることができます。
    青いタクトスイッチでパンタグラフを操作します。
    走行中にトグルスイッチで方向転換すると、徐々に速度が低下して停止し、その後逆方向に加速します。
    赤いタクトスイッチは緊急停止です。運転を再開するには一旦ボリュームを0に戻します。
    I built a motor into the Kumoru145 from Tomix "Railway Collection" and powered it.
    The power bogies are KATO DT21, and the pantographs are Tomix PS16P.
    Always apply a voltage of 5V DC to the rail.
    The transmitter controls Kumoru145 via Bluetooth, and Kumoru145 controls Kuru144 via infrared signal.
    RN4020 needs to be configured for central and peripheral settings before assembly.
    Headlight, Taillight and Coach Lighting can be turned on and off with the tactile switches.
    The blue tactile switches operates the pantographs.
    When you change direction with the toggle switch while driving, the speed will gradually decrease and stop, then accelerate in the opposite direction.
    The red tactile switch is emergency stop. To resume operation, return the volume to 0.
    【Circuit Diagram】
    [Transmitter] drive.google.com/file/d/1w7XA...
    [Kumoru145] drive.google.com/file/d/1-P5c...
    [Kuru144] drive.google.com/file/d/1mlBe...
    【Program】
    [Transmitter] drive.google.com/file/d/1EmJE...
    [Kumoru145] drive.google.com/file/d/11eT2...
    [Kuru144] drive.google.com/file/d/1CmG6...
    【RN4020 Setting】
    drive.google.com/file/d/1j_e0...
    【BGM】
    Broken - Patrick Patrikios (TH-cam Studio Audio Library)
    【twitter】
    hashtag/_%E3%82%A...
    .
  • ยานยนต์และพาหนะ

ความคิดเห็น • 85

  • @wanderlinger6545
    @wanderlinger6545 3 ปีที่แล้ว +47

    相変わらず謎技術(褒め言葉)

  • @kutakichi_
    @kutakichi_ 2 ปีที่แล้ว +17

    ここまで凝っていながら、カプラーはおもちゃっぽいアーノルドのままっていうのがいかにもこの人っぽい

  • @user-fh4ym5wm7o
    @user-fh4ym5wm7o ปีที่แล้ว +3

    パンタを自動で上げ下げするの初めて見た!しかもNゲージサイズでここまでやるとは素晴らしい‼️

  • @Onegi-eq
    @Onegi-eq 3 ปีที่แล้ว +5

    こんなに小さなところに詰め込むなんて凄すぎます……

  • @user-ee2ml4yx5g
    @user-ee2ml4yx5g 3 ปีที่แล้ว +4

    クモヤ22を持ってるけどワールド工芸でも
    こんなにギミック盛り込めないのに…
    模型に対する技術力が相変わらず凄すぎ

  • @けーなな2606
    @けーなな2606 ปีที่แล้ว +5

    多分この人が世界で最初にNゲージのパンタグラフを電動で動くようにした人()

  • @trdam
    @trdam 3 ปีที่แล้ว +6

    模型に命を吹き込むってこういう事なんだなあと…。

  • @morehappys
    @morehappys 3 ปีที่แล้ว +4

    電車詳しくないんですが、動き始めの挙動とかリアルで素晴らしいです!パンタグラフ動くのは変態かとw

  • @cyangokigoisu
    @cyangokigoisu 2 ปีที่แล้ว +11

    5:09 このモーターをNのディーゼルカーのエンジン部分に組み込んでだな、長大編成を再現したらかっこいいだろうなぁ。加速の感じとかまさにディーゼルカーっぽくて最高なんだが。

  • @redanntube
    @redanntube 2 ปีที่แล้ว

    完璧な出来❣️

  • @user-nl1ld9mr6n
    @user-nl1ld9mr6n 3 ปีที่แล้ว

    素晴らしい!! 感動しました。

  • @prashanthirwani8047
    @prashanthirwani8047 2 ปีที่แล้ว +3

    He/she is a MASTER ... HATS OFF TO YOUR TALENT 🔥🔥🔥

  • @sebastianthomas8507
    @sebastianthomas8507 3 ปีที่แล้ว +1

    You are my awesome TH-camr bro I really waiting for this kind of video, especially small cars, etc.. i love electronics and i love to watch your videos, i am great fan of youuuuuuuuuuuuuuuuuuu

  • @001tgv
    @001tgv 10 หลายเดือนก่อน +5

    偶然お見かけしたのですが、あまりにも変態魔改造すぎて(最上級の賛美です)言葉がありません。
    私ならパンタグラフの動作ロッド1ミリ幅のもの作ろうとするだけで挫折します。

    • @diorama111
      @diorama111  10 หลายเดือนก่อน +2

      ありがとうございます!
      細かい作業なので何度も失敗しながら結構必死に作ってるんですよ😅

  • @alexboon
    @alexboon 2 ปีที่แล้ว +3

    Wow..... what a craftmanship!!

  • @野良の三毛猫
    @野良の三毛猫 5 หลายเดือนก่อน +1

    素晴らしい

  • @MegaBlackJoe
    @MegaBlackJoe 2 ปีที่แล้ว

    masterpiece work. Thank you

  • @nscaledelights
    @nscaledelights 3 หลายเดือนก่อน +1

    Wow this is amazing thanks for sharing it with us.

  • @giokaimano8096
    @giokaimano8096 2 ปีที่แล้ว +1

    You are great! You are a Genius! 👏👏👏

  • @sasharoco2491
    @sasharoco2491 2 ปีที่แล้ว

    Просто загляденье👍🤝

  • @andytrewin
    @andytrewin 3 ปีที่แล้ว

    well done - nice presentation - thank you.

  • @Calaban619
    @Calaban619 2 ปีที่แล้ว +5

    For a minute I was wondering how he was going to string live power lines over the tracks....

  • @dz-abouttechnique1849
    @dz-abouttechnique1849 3 ปีที่แล้ว +2

    Excellent!

  • @Sohave
    @Sohave 2 ปีที่แล้ว +1

    This brilliant work makes me wonder if someone has made a DCC decoder for stepper motors?

  • @bangdogamelife5121
    @bangdogamelife5121 2 ปีที่แล้ว +1

    That's so cool 👍

  • @dmitriyfrolov6379
    @dmitriyfrolov6379 3 ปีที่แล้ว

    New video, I very glad

  • @danielkrogh9748
    @danielkrogh9748 3 ปีที่แล้ว

    awesome work

  • @vhofst
    @vhofst 3 ปีที่แล้ว

    Admirable!

  • @J_Creative
    @J_Creative ปีที่แล้ว

    amazing,his also a programmer nice nice

  • @jakionline8423
    @jakionline8423 ปีที่แล้ว +2

    Perfect

  • @hishin6180
    @hishin6180 3 ปีที่แล้ว +6

    パンタグラフから集電して走る機構も作れそうですね

  • @piracik1978
    @piracik1978 2 ปีที่แล้ว +2

    masterpiece!

  • @robertravena
    @robertravena 2 ปีที่แล้ว +1

    Very nice work!! where did you get the motors from?

  • @krisnadiimam4556
    @krisnadiimam4556 2 ปีที่แล้ว

    superb!

  • @PMARC14
    @PMARC14 3 ปีที่แล้ว +2

    This is such amazing and dedicated motorization work. A true showcase of skill. Also what Capacitor did you use? I assume that these electronics runs at 3.3v, so I would be super interested if you even added an above electrification rail to charge up that Capacitor

    • @diorama111
      @diorama111  3 ปีที่แล้ว +4

      Thank you.
      Supply 5V to the rail, and use 3-Terminal Adjustable Regulator to make 2.64V to charge Super Farad Capacitor (JUWT1105MCD). Then boost the voltage to 3.3V to operate the main circuit.

  • @f-p950
    @f-p950 2 ปีที่แล้ว

    魔改造中の魔改造(褒め言葉)

  • @LUBY23
    @LUBY23 3 ปีที่แล้ว +1

    素敵です

    • @LUBY23
      @LUBY23 3 ปีที่แล้ว +2

      見るたびに胸が騒ぐ。

  • @aneeshprasobhan
    @aneeshprasobhan 2 ปีที่แล้ว

    amazing

  • @AntonioBlok
    @AntonioBlok 2 ปีที่แล้ว +1

    Ma sei favoloso!

  • @Amrsingh
    @Amrsingh ปีที่แล้ว +2

    How to wire the stepper motor and operate it can you make a separate video in detail if possible. Thanks

  • @Zwariowny
    @Zwariowny 3 ปีที่แล้ว

    Awesome :D

  • @FIXDIY
    @FIXDIY ปีที่แล้ว

    great

  • @jul.7490
    @jul.7490 3 ปีที่แล้ว +1

    毎回良質な模型を製作していて凄いですね
    モータや電子部品は通販や電器店で取り揃えているといった感じでしょうかね?
    毎度興味があるのでどういったところで調達しているのか調べてみたりしますね(^-^)

    • @diorama111
      @diorama111  3 ปีที่แล้ว +4

      ありがとうございます。
      大体は通販で揃えているのですが、ステッピングモーターや超小型のフォトインタラプタやインダクタなどは壊れたデジカメを分解して取り外したジャンク品を使ったりしています。

  • @peng_noi
    @peng_noi 2 ปีที่แล้ว +2

    เจ๋ง

  • @paulostrong1834
    @paulostrong1834 2 ปีที่แล้ว +1

    Top amigão ✌️🇧🇷

  • @shuttyskenzin9237
    @shuttyskenzin9237 2 ปีที่แล้ว +2

    Hi Mr, can you tell me where you get those model trains? (without motors and stuff just the model train with those wheels), Are they from takara tomy? Please send me the link for those model trains because i would also like to add motors and stuff.

  • @tanaka_and_takahashi
    @tanaka_and_takahashi 6 หลายเดือนก่อน +1

    dccを(これは電波式だけど)自作している人を初めて見ました😂

  • @victor_glekler
    @victor_glekler 3 ปีที่แล้ว

    Nice work!
    Do you use a driver for controlling stepper motors?

    • @diorama111
      @diorama111  3 ปีที่แล้ว +1

      Thank you, I use DRV8835.

  • @GaussMathking
    @GaussMathking 2 ปีที่แล้ว +3

    3.9ミリ setpper motor はどこで手に入れることができますか。

    • @diorama111
      @diorama111  2 ปีที่แล้ว +2

      数年前amazonで買ったのですが、今は売っていないようです。

  • @AllahKareem77
    @AllahKareem77 3 ปีที่แล้ว +1

    U are amazing sir plzz teach me 🙏🏻❤️

  • @djmips
    @djmips ปีที่แล้ว +1

    Why do you paint over the markings on the 3.9mm Micro Stepper Motor? 3:09

    • @diorama111
      @diorama111  ปีที่แล้ว +1

      "8.0D" is painted on the motor. I don't know what that means.

  • @3nglehart
    @3nglehart 2 ปีที่แล้ว

    Quick question is there a difference with a stepper motor and a micro motor?

    • @diorama111
      @diorama111  2 ปีที่แล้ว +7

      I think stepper motors are stable at low speed.
      Especially when it starts to move, reliable speed control is possible.

    • @3nglehart
      @3nglehart 2 ปีที่แล้ว

      @@diorama111 how about high speed will it reach about 50-70kph scale speed? :D I'm thinking of stepper and micro combination.....

  • @Joohomincho
    @Joohomincho 3 ปีที่แล้ว +1

    Amazing...

  • @timurhodizoda4564
    @timurhodizoda4564 ปีที่แล้ว

    👍👍👍👍👍

  • @wzlab
    @wzlab ปีที่แล้ว

    1.27mm + Glass Epoxy,Where can I buy it? Can you send me a web link? Thank you!

  • @A-M-i-R-A-L-i
    @A-M-i-R-A-L-i 3 ปีที่แล้ว

    GOOD 🙏👌👌👌👌👌

  • @Kho_LichteinsSaitoh
    @Kho_LichteinsSaitoh 3 ปีที่แล้ว +3

    メルクリンも走れる交直流HOゲージで、デッドセクションの通過を見てみたいな~!

  • @jikubo1134
    @jikubo1134 ปีที่แล้ว +2

    なるほどわからん(混乱)

  • @ZuNunchaku
    @ZuNunchaku 2 ปีที่แล้ว

    what is the purpose of Photointerrupter ?

    • @diorama111
      @diorama111  2 ปีที่แล้ว

      The photointerrupter is installed to grasp the state of the pantograph.

    • @ZuNunchaku
      @ZuNunchaku 2 ปีที่แล้ว

      @@diorama111 is stepper already know the state? I dont understand why still use photointrrupter while using stepper

    • @efraingbj
      @efraingbj 7 หลายเดือนก่อน

      I think the photointerrupter brings a "zero position" to set the steppers, if not, you would have to rely on measuring the current surge when the stepper stops at each end of the screw, but I'm not sure if the ATtiny microcontroller can achieve that. Cheers and great video btw!

    • @efraingbj
      @efraingbj 7 หลายเดือนก่อน

      Maybe it is possible to store the last position of the stepper in memory so it is known each time that you turn the train on, but again I don't know if the microcontroller can achieve that, my knowledge in electronics is really rusty and a little bit outdated!

  • @michalkortus6348
    @michalkortus6348 2 ปีที่แล้ว

    Super 👍😲😍😍😉

  • @betoriconunes3211
    @betoriconunes3211 10 หลายเดือนก่อน

    Eu gostaria de comprar uma carreta dessa

  • @user-vz4ib3re6e
    @user-vz4ib3re6e 2 ปีที่แล้ว +4

    ?ドレミファインバーター音が?

  • @user-ot7kt9eg8d
    @user-ot7kt9eg8d 2 ปีที่แล้ว +5

    あ、頭が追い付かねぇ!(笑)

  • @usagi_Euph
    @usagi_Euph 2 ปีที่แล้ว

    NNにいるやつ?

  • @bharatmadhukar1984
    @bharatmadhukar1984 2 ปีที่แล้ว

    I ma from India .... Great video your.. I like it.
    Can u send me this toy to India..

    • @Sohave
      @Sohave 2 ปีที่แล้ว +2

      Not to be a killjoy, but I don't think people who build these very specialized and dedicated model trains are awfully keen on just mailing them to people who address them as "toys"

  • @user-xm9ge7ns5f
    @user-xm9ge7ns5f ปีที่แล้ว

    此れは売れます。

  • @viggo48sam
    @viggo48sam ปีที่แล้ว

    🏁🏁🏁🇩🇰

  • @TheJavaSync
    @TheJavaSync 3 ปีที่แล้ว

    Perfect