Remote controlled snow blower - tips and tricks. Easy way to remove snow from driveway with snowblower bot. Craftsman snowblower bot modifications - install remote control unit and other enhancements.
Wish you would have shown us wher you purchased the parts from and how you built this. I need this snce am a lower rght leg amputee in a wheelchair living in Minneapolis, Minnesota
I built a tracked big one and i removed the frame and buffed all the paint off and took a heavier Guage steel and basically laminated it to the original frame/housing so I could weld the wheelchair motor mounts to it at the proper angles and a beefier surface to mount bearing flanges
Its cool and I think one day in the future they will all or most will be be that way. Their is one main issue that still has to be dealt with. You need something with weight behind the machine to keep the machine down so.it clears to the pavement better and most importantly heavy snow thats high, especially heavy snow packed down at the end of the driveway where the plows packed it in. You still need a person (man) to work the machine into hard heavy snow like that. So the one thing you still have to figure out is a device with weight for the back of the machine to work it into that kind of snow once you have accomplished that the machines ready for anything. Otherwise and stil very well done. You should make a 1971 Ariens sno-thro 10000 series remote controlled, their heavy machines and the auger stsys on once you engage it and the machine will move by itself once its put in gear. Perfect candidate for remote control. Ive talked to a few people about that already. Now were seeing the idea materialize. Check out that machine.
I built mine out of a heavy tracked one and full size batteries and wheelchair motors. It's dig down to asphalt no problem. Fpv to the big screen is also really nice. Cheers
When you want to stay inside and have a hot cup of joe and watch TV but you have to snowblow the driveway. Should have stopped the music when you were snowblowing. It was OK in the beginning.
What would you like to know? I can answer your questions if you like. I built a tracked one powered with 24v and wheelchair motors with a 24v alternator and fpv to my big screen.
One word... liability. The people who are smart enough to build these things are also smart enough to understand how run them without it becoming a danger to themselves or others. The average American is not really responsible, or very intelligent. And probably would run this into traffic, or worse over the neighbor's dog or kid. The lawsuits would be endless, and very costly.
I can see someone fucking up and running over a dog or even God forbid a child. Some things in life are ok by remote control like a tv remote or drone but not a out of control snow blowing blade spinning killer.
Love the snowblower, the music makes me want to eat tinfoil
Yup 👍🏼
This would be unstoppable with my Tracked 208cc craftsman (it can pull me up hills, & is very stable). Well done! I must modify mine! Thanks!
Dude ditch the sound track and add a gps so you preset your plowing pattern other than that cool shit
Great Job, I want One!
This is amazing! I'm surprised at how underrated this video is!!! Well done!
Wow.. it's a snow battle bot. Awesome build.
Ok I'm ready for mine !!
Beatiful,I'm speechless. Thanks for sharing.
Wish you would have shown us wher you purchased the parts from and how you built this. I need this snce am a lower rght leg amputee in a wheelchair living in Minneapolis, Minnesota
Love it
That. Is. Friggin. Cool.
The frame that you're using is it the original from the snowblower
Nice. You need to mass manufacture
i am surprised the manufacturers are not offering something like this...
Nice
nice
Now you should write a program that'll make it completely automatic with safety features added how much did it cost anyway
Can you please tell me if you use the original frame on the snowblower or you have to modify the frame
I built a tracked big one and i removed the frame and buffed all the paint off and took a heavier Guage steel and basically laminated it to the original frame/housing so I could weld the wheelchair motor mounts to it at the proper angles and a beefier surface to mount bearing flanges
hey victor, i have one of my old wheelchair and i'd like to do the same thing. i need some help. how can i get in contact with you?
Well it's been five years. How did you do?
The makers of Roomba® now present the first autonomous robotic snow blower called the Snowba®
I be sitting on front stoop with 6 pack and dogs as neighbors loose there shit driving by.
Its cool and I think one day in the future they will all or most will be be that way. Their is one main issue that still has to be dealt with. You need something with weight behind the machine to keep the machine down so.it clears to the pavement better and most importantly heavy snow thats high, especially heavy snow packed down at the end of the driveway where the plows packed it in. You still need a person (man) to work the machine into hard heavy snow like that. So the one thing you still have to figure out is a device with weight for the back of the machine to work it into that kind of snow once you have accomplished that the machines ready for anything. Otherwise and stil very well done. You should make a 1971 Ariens sno-thro 10000 series remote controlled, their heavy machines and the auger stsys on once you engage it and the machine will move by itself once its put in gear. Perfect candidate for remote control. Ive talked to a few people about that already. Now were seeing the idea materialize. Check out that machine.
I built mine out of a heavy tracked one and full size batteries and wheelchair motors. It's dig down to asphalt no problem. Fpv to the big screen is also really nice. Cheers
When you want to stay inside and have a hot cup of joe and watch TV but you have to snowblow the driveway.
Should have stopped the music when you were snowblowing. It was OK in the beginning.
Wish i knew how to make this? Would help me a lot. I am a lower leg amputee in a wheelchair and cannot walk.
What would you like to know? I can answer your questions if you like. I built a tracked one powered with 24v and wheelchair motors with a 24v alternator and fpv to my big screen.
Желанная табуретка !
Should write an install manual and sell it as a kit for peoples snow blowers
Horrible music
th-cam.com/video/huEuG6lxWeQ/w-d-xo.html
To really benefit from this, you need to be at a remote location like your Upstairs Bedroom window or your car.
I first person view it to my big screen.
Why don't see any remote control snowblower put on sale in the home depo store?
One word... liability. The people who are smart enough to build these things are also smart enough to understand how run them without it becoming a danger to themselves or others. The average American is not really responsible, or very intelligent. And probably would run this into traffic, or worse over the neighbor's dog or kid. The lawsuits would be endless, and very costly.
@@ku8721 exactly
When u take a mechanical engineering class and get bored on weekendd
Stopping playing freaking music over the sound. I hate when creators do this!!!!
I enjoy Manning my snow blower without a controller
I couldn't stand the music so had to mute it
すごい このリモコンシステムがほしい
Cool mod, but all that time and money put into a piece of shit Poulan, LOL.
I can see someone fucking up and running over a dog or even God forbid a child. Some things in life are ok by remote control like a tv remote or drone but not a out of control snow blowing blade spinning killer.
sensitive comment = the destruction of good living
tlt40s&w 70 clever? Yes. I’m sure it will be a hit in places where pets are bountiful and free and the cost of life and limb is cheap.
Soon cars and trucks will be driver less.
With good motion and heat sensors , this is a great Idea.