BMW F10 LPF (low pressure fuel pump) install

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ส.ค. 2024
  • this is a 2012 528i low pressure intake fuel pump replacement video.
    the tools you'll need are
    -10mm socket on either a ratchet or impact driver
    -long handle flat head screw driver
    -rubber mallet
    -small flat head screw driver to assist clips removal
    -new fuel pump & tank gasket
    very straight forward job takes about 30 mins without having to record and using both hands.

ความคิดเห็น • 22

  • @jrey240
    @jrey240 ปีที่แล้ว +3

    Man, this right here was a life saver. For some reason, I couldn't find any videos for this, and then youtube recommended it out of the blue. Awesome guide!

  • @bigdaddy19821111
    @bigdaddy19821111 4 หลายเดือนก่อน

    Here is the update: I just replaced my fuel pump. The regulator does have a spot it has to go don't just stuff it I'm there. Facing towards the Passenger seat is a hole slot you drop it in. This was by far the most helpful video.

  • @thetovar9863
    @thetovar9863 ปีที่แล้ว +1

    The thing that bleeds back into the tank. I Believe it does has a spot, just clips on to for you won’t have trouble with the pump turning. Did 3 fuel pump changes and all had a spot it just clips on to. Did fuel pump in a 2011 535i f10, 550i 2015 f10 and a 750i 2008.

  • @bigdaddy19821111
    @bigdaddy19821111 4 หลายเดือนก่อน +1

    Dude thanks for sharing this video. Shop wanted $600 for this I owe you lol.

  • @Matice21
    @Matice21 ปีที่แล้ว +3

    Breh, I pushed that hose in the back as you did and it gave me incorrect fuel levels. About 3/4 a tank after each fill-up. It goes into a fitted slot 😑

  • @mb24777
    @mb24777 2 หลายเดือนก่อน +1

    Is this brand from orielys good? Any complaints from the customer since you fixed it?

  • @priscilaajala2675
    @priscilaajala2675 3 หลายเดือนก่อน

    Thanks Boss

  • @shay6998
    @shay6998 ปีที่แล้ว +1

    I can not find a fuel pump and strainer only for a 2011 BMW 535i XDrive. Called O’Reilly’s they only have the complete fuel pump assembly for over ($600.00) Don’t need all of that. Any suggestions please??🤦🏻‍♀️🤦🏻‍♀️🤦🏻‍♀️🤦🏻‍♀️

    • @ceezauto213
      @ceezauto213 10 หลายเดือนก่อน

      Have you found a cheaper option ?

    • @bigdaddy19821111
      @bigdaddy19821111 4 หลายเดือนก่อน

      I hate to say it but you probably have to go to junkyard and pull one. 😕

  • @elbale809
    @elbale809 ปีที่แล้ว

    Hi, I have the same car, when I try to turn on the car sometimes there is a delay, could that be an issue with fuel pump also?

  • @Matice21
    @Matice21 ปีที่แล้ว +1

    How did you know that it was that pump and not the high pressure fuel pump?
    In my f10 535, I’m getting low fuel pressure on the idrive and it doesn’t start but only cranks over. Lastweek I did recall smelling a strong gas smell in my car but went away afterwards.

    • @shawnmoore927
      @shawnmoore927 ปีที่แล้ว

      Hey did u find out the problem???

    • @Matice21
      @Matice21 ปีที่แล้ว +1

      @@shawnmoore927 It was the low pressure fuel pump. If that goes out, then you will be getting no startup.

    • @ceezauto213
      @ceezauto213 9 หลายเดือนก่อน +1

      Do you have to disconnect the battery when replacing the fuel pump assembly? Or is it just plug and play ?

    • @Matice21
      @Matice21 9 หลายเดือนก่อน

      @@ceezauto213 I hope i didnt respond too late...Yes!!! Disconnect the battery anytime you are dealing with fuel!!!

    • @LuisManuel30096
      @LuisManuel30096 8 หลายเดือนก่อน

      ​@@ceezauto213Always disconnect the battery. Aside from the fire risk, you also don't want the electronics to know you're working on the car and start throwing codes or burn out.

  • @davittskhomelidze5104
    @davittskhomelidze5104 6 หลายเดือนก่อน

    hi, i have same car, it is starting, can drive but after stop there is impossible to start, then few hours later it will start, i can drive but after stop it will not start again. i tried few EKP Module, coded all of them but this problem came again and again. it may be low pressure fuel pump?

    • @5kwattson
      @5kwattson  4 หลายเดือนก่อน

      Did you get the module coded to the car? Or try a reset procedure? Depending on the scanner that can turn on the ekp

  • @armanmdasd
    @armanmdasd 2 ปีที่แล้ว

    My car after short ride turns off with foult. Fuell suply after 10 min i can go again , can it be fuel pomp problem ?

    • @5kwattson
      @5kwattson  2 ปีที่แล้ว +1

      Yes that or the fuel pump module

  • @ivandiro8892
    @ivandiro8892 ปีที่แล้ว

    Okay