well demonstrated. But since these are meant for heavy duty home appliances safety is most important. It is always advisable to explain with audio ON including selection of type of cable, no of strands in a core (complete details of wire ) , safety aspects, likely mistakes, testing on load etc.
Nice neat job, man 👌 if you want to, you could also add a zip/ cable tie within the box around the lead itself just before it exits- to reduce chance of forces pulling out the cable? Just a thought .. Enjoyed your video.
Bro I want to install extension box for home use.For charging laptop, monitor,mobile.If possible I can use it for fridge.I want have four switch,four pin, indicator and fuse.Please guide me what wire I should buy for inside connection and also for outside wire ,socket.Please help me and guide me.
Thank you so much Mr. Fedrick for all your kind words of appreciation. It means a lot to me. I'm really sorry about the confusion. I will definitely try to follow your suggestions in my upcoming DIY video. Please feel free if you have any other suggestions. God bless you and your family 🙏
If the device operate on 220V and draw 2000W electrical energy, the amount of current required for the device will be = 2000w/220v = 9 amp. Conclusion: as this extension can withstand 15 amp current so definitely you can Use it to run your device. Please feel free if you have any other queries. God bless you and your family 🙏
Ok, so here power = 500watt, voltage = 220V, the formula for calculating current = power/voltage = 500/220 ~ 2.27amp. Now you are using a 6 amp plug with 16 amp socket to draw 2.27amp current. So definitely it's safe. God bless 🙏
well demonstrated. But since these are meant for heavy duty home appliances safety is most important. It is always advisable to explain with audio ON including selection of type of cable, no of strands in a core (complete details of wire ) , safety aspects, likely mistakes, testing on load etc.
Hi, can i use 16 a top plug with 20 a socket if i want to make an extension cord
Nice neat job, man 👌 if you want to, you could also add a zip/ cable tie within the box around the lead itself just before it exits- to reduce chance of forces pulling out the cable? Just a thought .. Enjoyed your video.
You're absolutely right, thanks for sharing your ideas and all your appreciation. It really means a lot to me.
A good job, but if I were you, I will put the fuse before the switch to safe much better the circuit.
In this same build can I use 6 amp socket instead of 16amp. The max load will be 1000watt.
Bro I want to install extension box for home use.For charging laptop, monitor,mobile.If possible I can use it for fridge.I want have four switch,four pin, indicator and fuse.Please guide me what wire I should buy for inside connection and also for outside wire ,socket.Please help me and guide me.
Socket which brand should be purchased which as fuse
What is the gauge of wire that u used for inside connections?
I guess it's 2.5 sq.mm
Which mm wire u used inside wiring
What size wire for 15 Metre Length for airconditioner ???
Thank you bro, however you could have used blue colour wire for the fuse that could have avoided lot of confusion, I had to watch this video 3 times.
Thank you so much Mr. Fedrick for all your kind words of appreciation. It means a lot to me.
I'm really sorry about the confusion. I will definitely try to follow your suggestions in my upcoming DIY video. Please feel free if you have any other suggestions. God bless you and your family 🙏
thank u very much for guiding me 😃
You're welcome and thank you so much for all your kind words of appreciation. It means a lot to me. God bless you and your family 🙏
भाई इस स्क्रूड्राइवर को क्या कहते हैं. कहाँ मिलेगा. मुझे लेना है.... For neutral you should have used black piece of wire instead of Red one....
Thanks bro!!
Thank you so much for all your kind words of appreciation. It really means a lot to me.
God bless you and your family 🙏
Can I use it directly to run a 2000watt 16 Amp room heater from home supply 230/240 volt 5 amp socket????
If u want to run a 2000watt heater using 240V supply, then u need (2000watt/240V = 8.33amp) 15amp socket not 5 amp.
Great Video....Can I know what would be the total cost ???
What is the approx cost for making this?
Will this work with 2000W induction base?
If the device operate on 220V and draw 2000W electrical energy, the amount of current required for the device will be = 2000w/220v = 9 amp.
Conclusion: as this extension can withstand 15 amp current so definitely you can Use it to run your device.
Please feel free if you have any other queries. God bless you and your family 🙏
Screwdriver model please
Thanks bro
thanks man
Hello sir. I am using a 6A plug top with 2.5 sqmm 3 core wire connected with 16A socket switch. Is there any problem with the 6A top instead 16A.
Can u please tell me the appliance (along with the power rating) that you want run using this setup, so that I can help u.
@@science_sir i am using 500W drill machine
Ok, so here power = 500watt, voltage = 220V, the formula for calculating current = power/voltage = 500/220 ~ 2.27amp.
Now you are using a 6 amp plug with 16 amp socket to draw 2.27amp current. So definitely it's safe.
God bless 🙏
@@science_sir In the plug it is mentioned 10A/16A whereas other household appliances has mentioned only 6A. Is there any difference?
Don't worry it's perfectly safe to use as you are drawing less current than the max range specified on the plug.
#vortex