I really enjoy the way you present high quality information sir! Your work is most appreciated and your videos add great value to the trapping community! Thank you for all you share. God bless!
I’m just bringing this up b/c I’m guilty as well, but the end swivel that goes through stakelizer is J hooked on the wrong end. I only bring that up because I lost a beaver that way and then found it a month later... great video love the channel🇺🇸
Love your hat pin, I have the same one. I also really like the flat safeties, they stay put alot better. I use 1/8" cable on my conibears, and I haven't had any issues, I also use 1/8" cable for drowning sets, and aside from one or two large beaver pulling the weight or stake out of deep water
You mention the spring eye gaps. Maybe that American, amongst all the rest of the American quality, can weld all those locations solid so there are no gaps anywhere on the trap ... (just a suggestion).
I wish you had added in some later footage of beaver getting caught in the RBG traps. I would like to see some results of the 440 in action. It looks like the kiss of death for a beaver, a great looking trap.
I would prefer to put the hook through the over lap part of the swivel at the stake. There is just something bothersome about not having something through the over lapping part of the swivel. It is like having a weak link in the system. I doubt anything could spread it apart, but why take the chance on an expensive trap?
What would you recommend man 10” or 12” for a every day beaver trap ? I cannot decide lol I got to much in the cart to get both at the moment . You know how that is .
How would you stabilize them in deeper runs would be my question? I don't know much about beaver trapping, but I'd like to get some my only concern is if there is a limited ability to stabilize them. Thanks!
I own several of these traps an they are excellent traps - animals are use to a round hole so why would ya jam a square trap in a round hole - just made since when they were designed
Hey, I know you brought up earlier that you were in to crypto currencies and you should get registered with BAT. It allows your audience to donate monthly or one off if they want. People using the Brave browser can just donate to you with their earnings for the month. Check in to it, I'd love to throw you a bit. You just need to be verified with Brave.
I just got back from Ohio, saw a lot of beaver sign up there, but they are gonna be under ice most of your season, from what I was told. Gonna be a bit tougher than what us Southern folks deal with.😉
One of the best things you can do is join your State Trappers association and get your parents to take you to their meetings. You will find plenty of guys there who will help you out, and you might find somebody near you who will let you ride along with them and watch how they do it.
Thanks for video brother. I've always wanted to buy a few thows. I no there not cheap maybe one day I can get a few. Check out 3rd generation trapper. That's me and son. We start TH-cam channel this year see what happens with it. Like ans subscribe. Thanks again .
I made so many of those “stakerlizer” in the 90s
I never knew someone had actually named them
Great video!!
Thanks Tim show us a few catches and good luck on the line.
I really enjoy the way you present high quality information sir! Your work is most appreciated and your videos add great value to the trapping community! Thank you for all you share. God bless!
Thanks for sharing your review on the RBG bodygrip traps. Nice river and better luck next time.
Nick erny is a good guy and makes quality products.i use alot of his traps.great video tim
Beautiful river. I see why you love it. Thanks for sharing the video. Good luck trapping.
Awesome video. Great footage as well. Tnx for sharing and letting us be "with you" on the river.
Thumbs up immediately.
Thank you sir!
I’m just bringing this up b/c I’m guilty as well, but the end swivel that goes through stakelizer is J hooked on the wrong end. I only bring that up because I lost a beaver that way and then found it a month later... great video love the channel🇺🇸
Good catch - thanks for the tip!
Yup thats what I was think the whole video. Turn that swivel around
Cool trap, I have been thinking of buying a few for raccoon buckets
really great to see you again MT!
Great stuff. I might grab a few small ones for mink.
Love your hat pin, I have the same one. I also really like the flat safeties, they stay put alot better. I use 1/8" cable on my conibears, and I haven't had any issues, I also use 1/8" cable for drowning sets, and aside from one or two large beaver pulling the weight or stake out of deep water
Pretty cool set going to order some snares for my preps today from. Southern snares merry christmas to me lol.
Really love your videos
Good video they are built well
I’m new to this channel and I love it great vids man
I’d love to see another attempt with those RBGs
The 280 RBG’s are a great trap. I’m convinced otter enter them more readily than square jaws at times. Quality trap made in Indiana.
Great real life experiences on the trap line!!!
The RBG 110s would be perfect for Marten
Thanks for the video! Nice looking traps for sure.
Long time no see.😉
🦊
Funny how the wind works, especially trapping from a kayak
You mention the spring eye gaps. Maybe that American, amongst all the rest of the American quality, can weld all those locations solid so there are no gaps anywhere on the trap ... (just a suggestion).
If you weild, it takes the spring out of the spring, messed up a few.
Going to try job weild.
I wish you had added in some later footage of beaver getting caught in the RBG traps. I would like to see some results of the 440 in action. It looks like the kiss of death for a beaver, a great looking trap.
Awesome new video
Land's sake ... those aren't muskrat holes ... looks more like a capybara hole !!!! Gonna have to upgrade to RBG 1900s !!!
I would prefer to put the hook through the over lap part of the swivel at the stake. There is just something bothersome about not having something through the over lapping part of the swivel. It is like having a weak link in the system. I doubt anything could spread it apart, but why take the chance on an expensive trap?
That’s trapping. That’s for sure. I totally understand.
Thanks for the info
would you recommend these as highly as Belisle traps?
Except for the safeties I like them better. I wish RBG gad the Belisle safeties.
Hey Thank you Information😁
What would you recommend man 10” or 12” for a every day beaver trap ? I cannot decide lol I got to much in the cart to get both at the moment . You know how that is .
10"
How would you stabilize them in deeper runs would be my question? I don't know much about beaver trapping, but I'd like to get some my only concern is if there is a limited ability to stabilize them. Thanks!
I've used an h stand on my 330 rbg
I own several of these traps an they are excellent traps - animals are use to a round hole so why would ya jam a square trap in a round hole - just made since when they were designed
How would you compare the rbg to a body grip with an expanda pan?
That's a tough call. Real tough. I'd love to see an expanda pan for the RBGs.
Are the triggers on an rbg a 2 way or 4 way trigger?
2 way with a single notch
@@Meattrapper thanks buddy
did you make your own chain for the traps?
No I buy it from Southernsnares.com
The Meat Trapper can u post a link, I can’t find it on their site
@@michaeljordon704 www.southernsnares.com/products/2-high-grade-chain?_pos=2&_sid=d7e30c3d8&_ss=r
Hey, I know you brought up earlier that you were in to crypto currencies and you should get registered with BAT. It allows your audience to donate monthly or one off if they want. People using the Brave browser can just donate to you with their earnings for the month. Check in to it, I'd love to throw you a bit. You just need to be verified with Brave.
you hated those safeties on the mb 1216, are the guys with the rbg traps paying you or what? what has changed?
These safeties aren't soft and don't bend like the older ones on the 1216's did. Any more questions jackass?
Wow the 440 could catch a 10 yr old..........kid
Depends on how you set it. Only use a trap like that on land where legal in a remote place, or in a real survival situation. It is lethal.
Hey meat trapper I only kill what I eat so how do I find beaver in Ohio I need some help I am only 13
I just got back from Ohio, saw a lot of beaver sign up there, but they are gonna be under ice most of your season, from what I was told. Gonna be a bit tougher than what us Southern folks deal with.😉
One of the best things you can do is join your State Trappers association and get your parents to take you to their meetings. You will find plenty of guys there who will help you out, and you might find somebody near you who will let you ride along with them and watch how they do it.
@@Meattrapper thank you love the channel do you ever eat possum I love it and raccon
Thanks for video brother. I've always wanted to buy a few thows. I no there not cheap maybe one day I can get a few. Check out 3rd generation trapper. That's me and son. We start TH-cam channel this year see what happens with it. Like ans subscribe. Thanks again .