ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- Giving the FCX18 a few simple upgrades. Does it help the performance? Let’s check it out!
Pick up the FCX18 here at fairrc!
shrsl.com/48nam
Pick up the FCX18 from FMS site here
www.fmshobby.com/
Pick up the FCX18 here on amazon
amzn.to/3rzENng
Front Outer Brass portal covers I used found here
amzn.to/48w3SAc
Front Inner (c-hub) portal covers I used found here
amzn.to/3rquj9Q
Samix Rear portal covers I used found here
bit.ly/3VxtXrJ
Wheels I used found here
amzn.to/3ETj8cO
Brass rings (in front wheels) for wheels I used found here
amzn.to/3tayyqD
Proline Swamper 1.0 tires I used found here at Horizon
bit.ly/3v91Rrd
Proline Swamper Tires found here at amain
bit.ly/456DKcp
Flubrc site found here
flubrc.com/
Ccxrc saplings I normally use found here
www.ccxrc.com/product-page/cc...
To contact me about reviews or questions email me at 2fastmattracing@gmail.com
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fourthwall.com/co...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - บันเทิง
Thanks so much for making the unboxing video and upgrade video so quickly. If I get another 1/18th scale truck this is the one I am going to get.
I ended up getting one of these, and i agreee its an awesome little truck. My first fms. My first truly scale rig. Can’t say enough about it. A couple easy mods and bang bang
Very excited to snag one of these to go with my TRX4M and SCX24.
Dude! Back to back videos! Just the fact we can use some of our extra fcx24 parts are awesome! Thanks for doing all the hard work for us! 1/18 scale k5 is what we can hope for!
Heck yeah! I love knowing a lot of those extra parts I bought will get used here and there lol
Lol fms already have a 1/18 k5. Its on the 1/24 but its an 18th scale body. How did you not realize this😂
Got my LC 80 the gray one wow what a beautiful truck I love it, tomorrow Sunday morning a few of us are heading to Walters RC Park here in Michigan I will get to test it out
I managed to add some little fishing weights to the axles to add some weight.
Got brass portal covers, aluminium shocks, injora brass wheels and swamp claw tyres on brass spacers. The stance is so much wider .
Great video man.
Awesome Matt, Just ordered the gray one yesterday.
Got my K5 in the background lol. Love your videos man, you created another addict.
Really appreciate that! Sorry for getting you addicted 😆
When you teased this last night, I couldn't wait for the vid! Totally worth the wait👍
Glad it didn’t disappoint!
Love that wood bridge looks awesome 👍👍😎
I ordered a set of shock keys that somebody can’t think of their name right now has made for this rig thought I would check them out. Yeah first thing I did those screws I put them in the back, and put my go to tires and mofo RC super deep dish rims She is looking sweet
killer video as always man!!
Awesome Video thanks. I have Fury Wagon almost here and if i were to buy any other 18th this year i think this would be it
Definitely liking that stance
Helpful vid. Thank you.
Notice the machined cooling on the gearbox casing 💯👍
Thanks for another great review. I hope they come out with a retro body or two. Possibly a licensed Jeep Scrambler or 60s Jeepster commando. Mini IH Scout bobtail truck from the mid 60s.. ??
Appreciate you also Matt, can’t wait to get mine. Ain’t going to put a lot into it either just a scale trail truck
Yeah they don’t need a lot for that. Very solid out of the box. Hope you enjoy it!
Servo arm mount is so clever.
Wow small changes big gains.
The reffs 179 is a awesome servo 🔥🔥😎👍
Very nice mods 👍👍👍
Where you find the connection for the shocks? You build?
comparison with fury-wagon, high-trail, and this one in all their parts, run, lines, upgrades would be interesting... cuz you know.. you can only have one right? hah!
And maybe even compared to other modded rigs like the stretched k5 and such.
thanks for the vid. This rig is interesting. new to the hobby I didn't know this was based on an earlier version.
New to the RC hobby. This was my first truck. Watching all your vids I did enjoy your furitek vids. Would you mod this one with a furitek option or should I stick with something more basic like a injora 60t motor? Great vids. Learned a lot.
My very first backwards fall broke my bumper, but it's so good without the bumpers that I needed up leaving it hahahah
Again: great review, love the horn hack 🎉 You don‘t have to swop the servo, just use an other horn. Fairrc has brass ones and it works great with any brass or aluminum steering link. Have done this to all my FCX24 even the Smashers and my black K5 which has a weight of about 850g
I’m just the type that if I take apart the steering I’m going to go ahead an upgrade the servo because it’s too weak for me anyway 😆
@@2fmrc looking forward to see what kind of servo you are going to use. I am quite happy with the stock FCX24 servo but if there is an affordable alternative in case of a brake down I would of course upgrade it.
Matt ... I just caught the fms release commercial..
They've got a whole lineup.. interior, trailer, lots of stuff 😉
Oh and the turn signals look stupid off road even in their commercials...
Just give us brake lights instead guys ..
hey mate. great video by the way. also, how do you put on the wheel weight things. cheers
Thank You.
I do have the V1 of this truck (same body essentially) i too have also broken one of these front bumper
Sounds like it’s probably a weak point then. I may have to order a replacement.
In a way I'm glad the trx4m is so popular to support the model but I've never been 100% and its become a real money pit! I know people rave on about apparent quality over non USDM brands like the fcx18. In my eyes this looks like it's the one I've been chasing for all along! I won't be surprised to see Axial join the 18th segment soon! Great vid, now to decide if I want to sell my never run 4m with £00s of upgrade parts!
I’ve been running mine with just some aftermarket wheels and tires with brass rings in it and took the front bumper off. It is a really amazing little truck. So stoked to have one.
I've had some fully upgraded FCX24 axles just sitting there for a while when I found out the gearing was all wrong for an scx24, ordered a dementor to build with FCX24 axles but now with this release im having to rethink my plans... DementorV2 with fcx24 axles that might not crawl well or this new Landcruiser....
What kind of nut driver are you using to tighten down the aftermarket injora wheels onto the axles? Are you using a different style of nut? The nut drivers that i have are too big. First timer with the mini crawlers. Thanks for any help!
I know this seems to already have good low speed modulation, but if you were to pair it with a Furitek motor/ESC system, which would it be?
I hope fms releases their fj cruiser in this format!😮
Same!
What would it take to put a power wagon or smasher body on this? Totally different mounting system?
what's the total weight and f/r distribution after the mods?
New wheels/tires look great, especially with the lowered body. What tire size did you have on the new wheels? No rubbing?
They are actually about the same size as stock tires. The Swampers measure about 55mm. I lowered the body and still don’t get much rubbing at all.
bit.ly/456DKcp
How do you pop out the shocks? I am afraid to break my old LC80 with stock shocks. I want to replace them with oil filled shocks. Thanks
Boom! Nice
Really appreciate that
What is the best website to go to for different parts for this truck
Do you think the furitek fcx24 chassis could work on the fcx18 lc80?
How did you bend the steering arm
Hey Matt considering the scale aspect of this rc do you think with what you have done if you kept the stock tires it would still perform well? I love the look of these tires, I mean if you had kept the whole thing stock and only changed the tires would it make that much of a difference?
Those are some of the worst stock tires I’ve ever gotten on an RC car.
@@RabbiJesus ok got u 👍🏻 this comments old but there always trying to make better stock tires and with fms and it being a pretty new crawler it seemed like these would be a good compound and tread
@@prob6999 maybe they were different back 4 months ago. But the tire rubber was firm, not conducive to gripping much of any texture. The wheels are plastic beadlocks though, so weight them and use em again.
I'm surprised how this rig crawls with its heavy hard body, now it has the wheel weights, the lowered suspension and the new tires.
I remember the video you've made earlier about the Chevy Mc Cue. That poor rig did its best to climb but struggled a lot to survive on your mountain. This one dances on with ease.
Thank you for this test. Another FMS is on the way, heading my home.😊
😅 bought one last night. Fms with another game changer.
Is there a way to get the tires tucked under the fenders, or can you not narrow the track width that far
I don’t think you can get any more narrow. The portals are just much wider than the original axles. Maybe a larger wheel like a 1.2 with a deep offset hex would fit over the portals and tuck in a bit more but I’d say it would be hard to get the perfect setup.
Would you buy fully brass axles or are those outer weights enough you think?
Also any preferences on portal full brass fcx24 axles you recommend?
I honestly stay away from brass or aluminum axle housings. Usually try to just add some brass on the knuckles and portal covers. The plastic just slides better imo so I prefer to run all plastic when I can. I’m just running inner and outer portal covers on this and it’s been amazing.
Much appreciated. You are the man
What is the battery connector type on these FMS cars?
Jst ds 2.0 or 2 pin. Some call them the molex 51005
Mine is coming in the mail tomorrow, what's the name of those tires and where you got them? You should link parts, I think you'll get a little kickback for anyone who uses your video to buy parts. Anyways, thank you.
They are the proline Swampers. I should have them linked in the description but horizon has them here
bit.ly/3v91Rrd
@@2fmrc🤦♂️🤦♂️🤦♂️ That's my bad I didn't hit the "more" button to see the further links. My bad and again, thank you!
@@abingham3747 no prob at all. Sometimes stuff is out of stock or unavailable after I post links so you never know if they are working or not lol. I really appreciate ya checking the links though. It does help out the channel tremendously!
@@2fmrc No worries I have an account with HH and Amain so I'll find them. Mine coming tomorrow and I'll be putting together a list of upgrades and I'll buy whatever I can from your links. Have a great day!
Can you still slow crawl in high gear?
Pretty good but it just don’t have the torque. Almost just like the Traxxas trx4ms out of the box 😆
Where did you order the brass weights from?
I used these on the inside of the front
amzn.to/3Pz4Xi0
These on the outside front portal
amzn.to/48n5Oet
These on the rear
bit.ly/3VxtXrJ
@@2fmrc Awesome Thank You for the info!!