ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ProArchitect
ฝัง
- เผยแพร่เมื่อ 15 ส.ค. 2024
- Subscribe to our Email list so that we can inform you about free Plug-ins, Videos, offers, and discounts!
WEB SiTE: www.programmin...
INSTRAGRAM: / milosdimcic
LINKEDIN: / milos-dimcic-0567443a
COURSES: proarchitect.t...
FB: / programming.architecture
This is a very basic description of the differences between Mesh (Polygonal) and NURBS geometry. We as architects need to understand computer graphics so we can use our tools (CAD software) in the best way possible.
ProArchitect #000 - Introduction: • ProArchitect #000 - Th...
ProArchitect #001 - What Programming Language to Use: • ProArchitect #001 - Wh...
ProArchitect #002 - Elon Musk and Practical Programming: • ProArchitect #002 - El...
ProArchitect #003 - The Downfall of "The Architect"
• ProArchitect #003 - Th...
Thank you for your support!
Voronax: • ProArchitect #007 - Vo...
Structural Engineering Today: • Programming Architectu...
Structural Optimization: • Programming Architectu...
Shadow Analysis: • Programming Architectu...
Coding Evolution: • ProArchitect #008 - Co...
New Profession: • Programming Architectu...
Referenced Creative Commons Videos:
Deadpool ZBrush
• zBrush Time Lapse - De...
Brain visualization
• Brain and neural netwo...
Stay free!
Milos Dimcic
Dr.-Ing.
www.programming...
This guy is awsome.. Just stopped by to say this
This was so helpful and interesting. Thank you so much! Great content!
Thank you for posting this video. I am only catching a scrap of this but it feels like something real and doable could come from using it and the explanation is not mysterious.
學習3D軟體20年
終於有人把這些關係給說清楚
真心謝謝你的分享
Nice video! xD
I am Designer mecahnical since more 10years and I use CATIA and SOlidworks in Nurms, after DAZ or 3DS MAX in MESH for make Render fantasy xD
This content is excellent and straightforward. Keep it up!
nothing like tryinng to get g3 continuity from 5 sided areas with nurbs patches. then again getting accurate class a surfaces from mesh modeling via smoothing, or subdiv can be frustrating. also the pesky vertices, that get knocked around if not careful.. easy to get caught in between the two ways of modeling. framing up job in advance as you mentioned is key.
Its very much helpful sir very thanks on you to clearing a doubt on 3D mesh & poly object nurbs etc etc on 3d world as i can modeling in autodesk maya & 3Ds max...
also i'm an VFx & 3D animation student from India
very nice explanation sir ^^ hoping for more geometry related videos ^^ thank you
awesome video! very thorough
Nice video Sir !!! very informative
love from India
"this is almost never useful" LOL. Thank you for clearing it up for us.
This is a great video.
Excellent presentation. What do you think of NURBS in Blender 2.8 ? I ask because Blender is free. You mentioned Rhino but Rhino is very expensive. Thank you.
Great explanation thank you
Very nice explanation
Very helpful!
thank you so much! it was really helpfull
keep up the good work
Good stuff , bravo.
I spend time to learn a 3d software until a day I find out it can not smooth because it polygon. I search and search then I find Rhino is NURBS which is different with mesh. There's a issue with Rhino is comeback and edit. You could not edit after boolean. I find again and now I fall in love with Fusion 360 T-spline. It perfect for make sphere, history edit and more.
Great explanation, tons thanks form me
Hi, do you know how to export Nastran deformed surface in NURBS?
What do you think about "the why factory" by MVRDV and Delf university?
Simply Excellent Sir, Thank you very much, please do more videos on NURBS Parametrization and Geometric Modeling
Meshes are actually more precise than parametric models. Vertices, at the very least, are exact, while parametric models are approximation. They are smooth and nice, but they don't pass through correct points. Use what you like. I chose to use mesh (and I am nearly finished with a slicer that converts sliced mesh into multi point Beziers, to get the best of the both worlds).
Its not a question of one of the other. In CAD applications, you use NURBs for multiple reasons (e.g. you can visualize them without aliasing in any scaling). In the medical field e.g. to visualize the mesh of a bone or do some algorithmic manipulation like fill holes in a mesh of a bone, you use a polygonal mesh because this is whats generated from imaging modalities
@@fritzschnitzmueller3768 Thank you for your feedback. I don't understand what advantages are in visualizing without aliasing, but maybe that's just me. I mostly use Blender and it runs even on Raspberry. Mesh can be sliced and made into geographical map like curves, that is my point. We don't need curves for modelling. That's pain to do. For me. From slices parametric model can be rebuild precisely, the other way around approximately. I abandoned the slicer temporarily anyway, in favor of da Vinci's compass which, if CNC driven, will output lenses of higher accuracy than mill can.
@@kokeskokeskokes If u sample data from the real world(like a CT/MRI scanner, a 3D scanner) you dont get curves u get points or volumes, which you can triangulate or use contouring to get a triangulate mesh. It wouldnt make sense to convert them to NURBs because u cant win more precision by doing that. U can only lose
thank you! great video, interesting to know the frenchies working for Renault and Citroën beside their skills still made ugly cars...Beauty is in the eyes of the beholder i get it but i can see beauty more than most. I was born on the planet beautyon. I love your video
Besides Rhino, which other software do you recommend for NURBS?
Most of CAD software have NURBS integrated today, but it is usually not their focus. For Rhino that is the selling point (NURBS modelling tool), and that is why it is easiest and most comfortable to use, and at the same time, it is relatively cheap. If you want to go open source, then Blender could be a possibility. If you are already using 3ds max their NURBS is not bad either. If you are a mechanical engineer (with a lot of money) then CATIA or similar software that includes static analysis is the answer. So I do not really recommend any other software when it comes to NURBS...if NURBS modelling is your goal...but you can use most of them.
thanks!
Another favorite of mine (by the same guy who originally programmed Rhino3D) is MoI3D. It is much cheaper, and easier to learn in the beginning. Rhino is a bit more robust, but may be overkill for your NURBs needs.
ProArchitect stupid. Blender does not do NURBS. What it has is a joke.
Maya is a good tool to learn NURBS, but it's not a generative tool.
I start to like you
Really thank you for your unwavering implication of knowledge.
I do have a question, if you allow - Why Mesh at all, if a NURBS with so many advantages.
Greatings,
Martin
in the medical field we generate meshes from Voxels (volume element), which is volume data or the 3D equivalent of a pixel(picture-element)) because this is what a CT-scanner or MRI-scanner provides. The meshes are generated from the voxel data with contouring algorithms like MarchingCubes or DualContouring. So if a doctor wants smooth-surfaces from the CT data(voxels, which look like minecraft) to do operation planning,he can only do that with polygonal meshes. Therefore many algorithms use polygonal meshes