Great video. Did the same wall, and caulked it all up, and wood filled the edges where boards meet. Great diy project, and wife is happy is what matters lol 😆
Best carpentry-cinematic youtuber out there. Job well done Mr. Jared. Lowes/Home Depot.... do sell the 1x2 (aka 1.5" wide trim) either primed mdf or primed pine. "Sometimes" it's cheaper to buy it like that, rather than ripping down that 1x4. Plus avoiding the extra mess and time, that primer they use is nasty to get everywhere. Speaking of mess, I envy your install in a construction environment, letting the dust go as it pleases lol Dope video!!!! really enjoyed your musical treat at the very end.
I never thought about not letting the dust go. I guess most people have to control it one way or another 😂 I hate it. I’m wearing a mask more and more these days cause it’s getting in my brain 🧠
Definitely protect that brain lol. The majority of what I do for carpentry are these feature walls. The new home market here in AZ is insanely busy, so most of my clients are folks who just moved into their new build with all their new furniture. So I'm tarping and taping everything off, multiple shop vacs, it's a production to keep things looking like I never entered the building. Nacho Libre Voice "Itz tha beeest.. i luv it"
@@ahmedalsanea6079 damn. I cut my thumb pretty good with a razor knife and they decided it was clean enough to glue it back. Well that came unglued in about a day and it healed all weird and also numb to the touch. I wonder how many carpenters have numb spots on their hands 😂
Me @0:05: "Weird... Dude, I swear he normally has intros that are way less "normal" than that. My friend @ 0:05: ... Me @ 0:08: See! That's what I was talking about! *makes rapid fire arm/hand movements* TAPE MEASURE, PENCIL, KNIFE!!! My friend: Dude, WTAF did I just watch? Thank you for your videos! 😂🔥
WOW!!!! Wished I had seen this before I did my small wall. Everything is off and the ends are not 45 degrees. Im about to take it down I know Im going to tear up the wall.
Probably something like that. I’m no expert when it comes to painting. I might use a bondo or wood filler for the nail holes. Then caulk, then maybe use one of those foam sanding blocks.
Love your stuff man! I'll be making a partition wall for my new workshop in a few months. Can't wait to do this. You are inspiration, quantified. But God, either stop using MDF, or wear a mask dude. MDF is as nasty as my ex
Thanks for the show ..you have a real "Coach Beard" vibe going on over there... oh, and nice job with the accent wall ... 💯
Thank you, yet again, for sharing your art with the world. I can't get enough.
Your skills and passion for how you do your work and your videos is truly amazing! Keep up the great work and superb video editing!
The brad nailer shots were on beat pretty dope editing. This was entertaining and educational
Once again, criminally underrated content coming from Jared Turner.
lol I think it’s appropriately rated content
Well said! Exactly!!
You are so funny and brilliant 👍
Great video. Did the same wall, and caulked it all up, and wood filled the edges where boards meet. Great diy project, and wife is happy is what matters lol 😆
Another awesome video Jared - liked the offcuts falling slo-mo while you walk off lol. Keep crushing it!
You go buddy... I hope the cabin on the mountain is going well.
I like your style and teaching techniques, so good 👍👍👍
Please do more any kind of work
Great entertainment, cool design. Thanks for sharing. 🙂👍
Love your videos man. Never change your style of video making its raw and probably one of the more unique styles out there. Great work.
Loved the gut going backwards in the window.
I can’t ever get the job site to myself, so I just possess them with the reversies 🤭
Feel good to see you doing such a amazing work ❤
Another banger bro! Love your work man. Keep it up.
Wow I did a wall exactly like this a few months ago..from a picture.. they might have gotten the idea & picture from this..awesome when finished
still my favorite channel! love it bro!
Best carpentry-cinematic youtuber out there. Job well done Mr. Jared.
Lowes/Home Depot.... do sell the 1x2 (aka 1.5" wide trim) either primed mdf or primed pine. "Sometimes" it's cheaper to buy it like that, rather than ripping down that 1x4. Plus avoiding the extra mess and time, that primer they use is nasty to get everywhere.
Speaking of mess, I envy your install in a construction environment, letting the dust go as it pleases lol
Dope video!!!! really enjoyed your musical treat at the very end.
I never thought about not letting the dust go. I guess most people have to control it one way or another 😂 I hate it. I’m wearing a mask more and more these days cause it’s getting in my brain 🧠
Definitely protect that brain lol.
The majority of what I do for carpentry are these feature walls. The new home market here in AZ is insanely busy, so most of my clients are folks who just moved into their new build with all their new furniture. So I'm tarping and taping everything off, multiple shop vacs, it's a production to keep things looking like I never entered the building.
Nacho Libre Voice "Itz tha beeest.. i luv it"
DOPE 😂 I LOVE THE personality
wow, your video quality is great!
you made it look easy, I was doing a geometric wall art when I cut my thumb on the table saw
Oh noo! That’s my nightmare. I hope it wasn’t too bad
@@TMPK 5 stitches and still numb to touch
@@ahmedalsanea6079 damn. I cut my thumb pretty good with a razor knife and they decided it was clean enough to glue it back. Well that came unglued in about a day and it healed all weird and also numb to the touch. I wonder how many carpenters have numb spots on their hands 😂
Great job
Artist gonna art.
I enjoyed watching your video. As a matter of fact I'm thinking of doing a similar wall. Can you please let me know what material you used?
Couple questions the talented JT.
MDF board being used?
and is it ok to nail those dartboards into drywall without then falling off? lol
What kind of wood did you use and size of nails and you done a good job 👍 and how long it did it take you
The wood is mdf, the nails are 16 gauge 2 inch, probably took me 2 hours. Sometimes it takes a lot longer when I video the process.
@@TMPK okay cool I’d love to try it myself but I’m afraid of messing it up lol
Me @0:05: "Weird... Dude, I swear he normally has intros that are way less "normal" than that.
My friend @ 0:05: ...
Me @ 0:08: See! That's what I was talking about! *makes rapid fire arm/hand movements* TAPE MEASURE, PENCIL, KNIFE!!!
My friend: Dude, WTAF did I just watch?
Thank you for your videos! 😂🔥
Awesome reverse guy.
Where do you get your crown molding?
the crown on this job came from Henley Supply in Decherd, Tennessee
I have to say, you’re awesomely comical😂
Thanks! 🤪
What’s he mean by 2-degree bevel on the angle?
WOW!!!! Wished I had seen this before I did my small wall. Everything is off and the ends are not 45 degrees. Im about to take it down I know Im going to tear up the wall.
Would you then use filler over the nail heads and caulk? Then a final sand?
Probably something like that. I’m no expert when it comes to painting. I might use a bondo or wood filler for the nail holes. Then caulk, then maybe use one of those foam sanding blocks.
Glad to see you again buddy how are you . thought you fell off the world or something.🤣🍺
What size nails do you use amd what kind of nail gun?
16 gauge 2 inch straight nails. Metabo HPT 16 Ga. Finish Nailer
Are you putting caulk or spackle between the walls and edges before painting?
I’m sure the painters do that. Caulk would be the way to go.
Thanks for your prompt reply
I really missed your videos I hope all is well with you
Love your stuff man! I'll be making a partition wall for my new workshop in a few months. Can't wait to do this. You are inspiration, quantified. But God, either stop using MDF, or wear a mask dude. MDF is as nasty as my ex
2:25 - What am I watching in the window?
Slow motion reverse human
Is it still 45 degree angle of you have a larger wall?
Should be!
Tape Measure. Pencil, Knife, Easy Money
Slightly different from your drawing, but love the work and passion
😂😊👏👏👏
The same accent wall idea is being replicated by so many people. What ever happened to original ideas?
That cord on the floor is safety hazard. You can trip and fall over it.
Where should I put it?
May be away from the path that you take while walking between the wall and your work area?
Great job