Amazing. I've never thought of the possibility that wireless led can be achieved on a MG kit, considering the fact that the MGEX uses wired leds which for me is kinda fragile because of its thinness. Keep it up. 👍👍👍👍👍👍
Great Job, just wanted to know if you painted the inside black and used reflective tape (you don't need to because the led is strong). Website where you sell your products?
They are my own products, I also sell them. The base (transmitter) @59.9USD The led@3USD/BOX(including 5 pcs of leds) You can select any colors and quantities of leds you want. Up to you. But you need a base at first.
different gunplas with different cases. some gunplas need to drill or cut. I used blue tack or double sided tapes which are included inside the LEDs boxes
There aren't any batteries on the leds. And they don't need to be charged. There is a base(the black board) connectes to power. And it generates a magnetic field. When the wireless leds close to this field, they are lighted up
@@hagensu1748 I would buy, but currently the only gundam I have that I would use led lights in is the mg RX-0 Full Armor Unicorn Gundam, gundam is same scale as yours but with the accessories its just too long to use these LEDs with.
@@derekcd4740 you might be more familiar about Wireless Charging? It's kinda like that. The base emits a wireless current, and a special compatible receptor will receive the current.
46leds for full body +2 for sabers +1 for bazooka =49leds. 11 blue lights and 38 red lights. The leds cost 29.7usd But you need a base which generates a magnetic field for those leds
It should be flashing on a phone charger. You need to buy big coil(with circuit) as you power supply, and usually they also sell the leds for their own big coil. There is no need to make leds by yourself. If you want to make leds by yourself, you need to know the frequency of the big coil first, then calculate the parameters of your small inductor and capacitor to match the frequency from the big coil (usually around 200khz, you need to measure it, I don't know the exactly frequency it is). Or you can make big coil and leds by yourself. You can search many different kinds of demo circuits, such as 555 + a mosfet or 8051 + mosfet or something similar. But just try a simple one first, after you know about wireless power transfer you will know which circuit is good for you.
@@phuonglee765 it is still to large for a rg unicorn even using a cd32. And the the other problem, the brightness is not enough to lit up the unicorn. I used c43 for my mgunicorn. But that is the improve version, the there is also a brightness issue on the first version leds(which used on Lego toys).
@@phuonglee765 I think rg is quite difficult. Maybe you can try it on hg first, there are more rooms for placing the wireless leds. In fact, wireless led is quite different from normal leds. You need to try it by yourself and think it on different ways. But that is the fun when you finish your work.
@@hagensu1748 Really? Interesting. I hear the normal one basically falls apart at the slightest breeze. I haven’t really watched any reviews on the Ver.Ka, but I imagine the MGEX is based off of it, so maybe it’s not that bad
@@hagensu1748 Awesome! I might look into it. I would get the MGEX, but price, and it’s apparently super fragile: the LED strip that is, and my hands are not the steadiest, so I don’t want to risk messing up a $200+ model kit
There are no batteries on the leds, so they will not run out of energy. The energy is from the base. The base connects to the power. The base transfers the power to a magnetic field. When the wireless leds close to this field, they are lighted up
not remote controlled but similar. no batteries on LEDs. They receive power energy from the emitter(base). When you turn off the emitter, all LEDs are off. similar to remote controlled
@@NanoTheLuuProto if you cut or drilling holes on the inter frame. Then it could still transform. Normally, I don't really want to cut or drilling holes.
there is a base(emitter) behind the unicorn. it connects to the power. when switching on, it generates a magnetic field for the wireless leds. when the wireless leds close to the field. they are lighted up.
@@jhonbertl.tejano2777 here is an ebay link. There is only one list on it, I don't sell on eBay usually, because they charge 18%transaction fees. It makes you pay much more on the products. www.ebay.com/itm/384730742588?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=i8u9fpyjqp6&sssrc=2349624&ssuid=i8u9fpyjqp6&var=&widget_ver=artemis&media=COPY I perfer PayPal
@@hothinh8318 there is a base behind the Gundam, it connects to the power, and generates a magnetic field for the wireless leds. When the wireless leds close to this field, they are lighted up
@@hagensu1748 Actually I want to ask what MG unicorn did you use ? And we all know that non MGEX unicorn are notoriously known for easy to break apart so is it the ver ka or ova ver ?
💀💀💀 it’s much harder to make wireless LEDS rather than a LED sheet, and besides even “pro” gunpla builders have broken the strip. It’s much better and less costly to constantly buy double a batteries for it.
@@rohanmehta1515 I doubt you could even afford the MGEX let alone the RG seeing how childish you are especially after replying after 5 months that’s just pathetic
Amazing. I've never thought of the possibility that wireless led can be achieved on a MG kit, considering the fact that the MGEX uses wired leds which for me is kinda fragile because of its thinness. Keep it up. 👍👍👍👍👍👍
Thanks a lot. It is my own product
@@hagensu1748 where can i buy?
@@Avisoarmy I sell these products
@@hagensu1748 is it available in shoppe ?
@@carlhezrafreddieap2217 only ebay store
That almost firey appearance through the camera really sparks some cool ass ideas for a flaming unicorn gundam custom
Awesome build and customization
Just started to build, appreciate and give value on this kind of toy,the first I saw this I said sheeeeeeeshhhh
Thanks
kind of a random question but what tweezers are you using? the ones i use always get the tip worn out or just break.
Just bought it in my local store. It is cheap. Only 0.2usd. So I don't think it is a high quality tool.
Pretty cool!
Great Job, just wanted to know if you painted the inside black and used reflective tape (you don't need to because the led is strong). Website where you sell your products?
Thanks.
You can add my Facebook account Wptlight BL for more information.
Incredible
Now this is what I call "The Beast of Possibilities"
Super cool
it's amazing
Cool! Where to get a set of that led lights? And how much it will cost?
Does it set with the base?
They are my own products, I also sell them.
The base (transmitter) @59.9USD
The led@3USD/BOX(including 5 pcs of leds)
You can select any colors and quantities of leds you want. Up to you.
But you need a base at first.
perfect
Btw awesome music
It's good!
Woah
Did you need to cut any plastic to make LED fit?
How do you make the LED stick to plastic?
different gunplas with different cases.
some gunplas need to drill or cut.
I used blue tack or double sided tapes which are included inside the LEDs boxes
How amazing the effect on the psyco-frame, even better than the leds of the Perfect Grade, what is the name of the leds that you used?
LBASE Wireless lights.
my products😬
@@hagensu1748where can I buy your products?
❤️❤️❤️❤️
Apparently that wireless kit and the MG unicorn ova is still cheaper than MGEX about 100$ :v
Cause the mgex has led and a ton of accessories
The theory about shinanju about eyes, the red eyes fimilar as gery sninanju from gundam NT
How long do the batteries last, do they charge? May have missed some details elsewhere on this page, sorry if i did so.
There aren't any batteries on the leds. And they don't need to be charged.
There is a base(the black board) connectes to power. And it generates a magnetic field.
When the wireless leds close to this field, they are lighted up
@@hagensu1748 thats neat, didn’t know you could do that. Thanks for the info.
@@ShinigamiH yes, it is my own product. I also sell it 😬
@@hagensu1748 I would buy, but currently the only gundam I have that I would use led lights in is the mg RX-0 Full Armor Unicorn Gundam, gundam is same scale as yours but with the accessories its just too long to use these LEDs with.
@@ShinigamiH if the full armor isn't taller than 30cm. I think wireless leds maybe ok for it. But I not sure
Can I get the kit, base and wireless set up my guy.
How do you keep the led’s charged over time?
There is no need to charge. There is no battery on the led.
@@hagensu1748 holyshit, so the Base actually emits something like a tesla coil would do? that's insane
@@DioSatyaloka exactly
@@DioSatyalokawait what?
@@derekcd4740 you might be more familiar about Wireless Charging? It's kinda like that. The base emits a wireless current, and a special compatible receptor will receive the current.
Will it fits in rg unicorn?
you can try T3# leds(the smallest leds) on a rg
@@hagensu1748 where can I buy?
@@ammarhaziq5333 contact Wptligh BL (Facebook account)
How many led does it need for a full body psycho frame? And how much?
46leds for full body +2 for sabers +1 for bazooka =49leds. 11 blue lights and 38 red lights.
The leds cost 29.7usd
But you need a base which generates a magnetic field for those leds
@@hagensu1748 where did you buy them? Also can this led used in rg one?
@@harrysyodihermawan2739 the wireless leds are my own products. I also sell them
@@hagensu1748 it costs $1470 total?
@@poofsplix2003 no. About 88usd for a set the same as the video shows.
It's good but... You should add green light on the eyes
The eyes part is not a clear part
That is so fuckin cool
You deserve as much subs as your views on this video
thanks bro
IMA NEED THAT
You can add my Facebook account Wptlight BL
How many do you think I'll need to light up a megasized unicorn Gundam?
10-12 boxes of #7 LEDs (50-60) should be enough
@@hagensu1748 dam the model is 1/48th scale it stands up to my knees
@@rensellvalencia7179 yea. mega size is huge.
what I showed on the video is mg
Can you tell me how to make the power supplier? i can make the led but when put them on the phone charger they only flash not always
It should be flashing on a phone charger. You need to buy big coil(with circuit) as you power supply, and usually they also sell the leds for their own big coil. There is no need to make leds by yourself.
If you want to make leds by yourself, you need to know the frequency of the big coil first, then calculate the parameters of your small inductor and capacitor to match the frequency from the big coil (usually around 200khz, you need to measure it, I don't know the exactly frequency it is).
Or you can make big coil and leds by yourself. You can search many different kinds of demo circuits, such as 555 + a mosfet or 8051 + mosfet or something similar. But just try a simple one first, after you know about wireless power transfer you will know which circuit is good for you.
@@hagensu1748 i want to make it smaller to attach on my RG unicorn. So i do it my self but stuck in making the supplier
@@phuonglee765 it is still to large for a rg unicorn even using a cd32. And the the other problem, the brightness is not enough to lit up the unicorn.
I used c43 for my mgunicorn. But that is the improve version, the there is also a brightness issue on the first version leds(which used on Lego toys).
@@hagensu1748 so you have any ideal about lighting up the RG without wire?
@@phuonglee765 I think rg is quite difficult. Maybe you can try it on hg first, there are more rooms for placing the wireless leds.
In fact, wireless led is quite different from normal leds. You need to try it by yourself and think it on different ways. But that is the fun when you finish your work.
Wouldent you have to replace every one if these?
You needn't to replace any parts
What kind of MG Unicorn is this? Is it the normal one, or the Ver.Ka?
Normal one, in fact, there are not many different with the Ver. KA
@@hagensu1748 Really? Interesting. I hear the normal one basically falls apart at the slightest breeze. I haven’t really watched any reviews on the Ver.Ka, but I imagine the MGEX is based off of it, so maybe it’s not that bad
@@ilikegiantrobots1775 It is not really bad. I add my own wireless led on it. It looks better
@@hagensu1748 Awesome! I might look into it. I would get the MGEX, but price, and it’s apparently super fragile: the LED strip that is, and my hands are not the steadiest, so I don’t want to risk messing up a $200+ model kit
@@ilikegiantrobots1775 MGEX unicorn is really expensive. I can't offer it😅
how long can the LEDs light up before it runs out of energy?
There are no batteries on the leds, so they will not run out of energy.
The energy is from the base. The base connects to the power. The base transfers the power to a magnetic field. When the wireless leds close to this field, they are lighted up
@@hagensu1748 whoa that sounds really cool!
that is AWESOME!
How can I buy? thanks!
Just leave massage. I sell this product
ya
@@hagensu1748 where can i buy them
@@despookynepnep3989 contact me on Facebook
Account Wptlight BL
How many did you use?
50 lights
aaaaaa i want to buy those leds and the base
Hahaha, leave me your FB account
Price? And how many LEDS come with the set?
The base and led are separated, you decide how many leds you want.
I sell this product, leave me messages
Where could I buy these LEDs and base?
contact Wptlight BL (Facebook acc)
is the led Remot controlled?
not remote controlled but similar.
no batteries on LEDs. They receive power energy from the emitter(base). When you turn off the emitter, all LEDs are off. similar to remote controlled
Where can I buy LED lights like this?
I sell it
@@hagensu1748 What is the price per item?
@@PRUENI-ld6kf 53. 9usd for the base
2.7usd /box for the wireless leds
wow cool where to get base and the leds or should i ask how to order em? lol
They are my own products.
I also sell them.
You can add my messenger.
The account is the same as my TH-cam.
@@hagensu1748 sorry which messenger do you use as there are several i can think of,
@@fil-am0078 Facebook
@@hagensu1748 whats the radius of the field that provides power to the wireless led? how far/close do your wireless have to be to the base?
@@fil-am0078 the led is still lighted up when there is 30cm far away from the base.
But the best performance is under 25cm
Bro can you tell me what brand of the unicorn Gundam is that
Bandai MG Unicorn
the lights are not included
It looks like lava
Can i use a normal magnet to charge it? 
no. it can't
Could this work for the MGEX Unicorn?
yes, wireless lights can be used on most of MGs
@@hagensu1748 So if I can somehow put the wireless LEDs in the MGEX Unicorn of where the light shines through, it can still transform?
@@NanoTheLuuProto if you cut or drilling holes on the inter frame. Then it could still transform. Normally, I don't really want to cut or drilling holes.
So u put wireless LEDs to the mg uni, so to turn it on u use a remote or something
there is a base(emitter) behind the unicorn. it connects to the power. when switching on, it generates a magnetic field for the wireless leds.
when the wireless leds close to the field. they are lighted up.
What size for the OVA unicorn MG And RG FULL ARMOR Unicorn??
ova mg
@@hagensu1748 ova MG is the size?
@@Ramen551
Yes, It is 1/00 mg unicorn. About 22cm tall in destroy moder
@@hagensu1748 🥺🥺 thank you !! Is it same size for RG unicorns
@@Ramen551 no. Much bigger than rg size
Do you sell those in the Philippines?
Yes, search LBASE on shopee
Thank you
Hi
Im interested on the wireless led
my FB acc Wptlight BL
Where you contact, so where can I buy this stuff
I sell this stuff. You can leave me messages
@@hagensu1748 where's you contact info do you have FB or anything?
@@renaldykristian3026 yes, FB or messenger account Wptlight BL
Where can I buy that light
lbasehobby.com
What is this led called?
LBASE WIRELESS LEDS
They are my own products
How can we get in contact boss I need me two sets of these
Facebook account Wptlight BL
how to change or charge the battery?
No battery inside.
@@hagensu1748 ok got it.
They use wiless.
Where could I buy one
My products, I sell them
What website
@@jhonbertl.tejano2777 here is an ebay link.
There is only one list on it, I don't sell on eBay usually, because they charge 18%transaction fees. It makes you pay much more on the products.
www.ebay.com/itm/384730742588?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=i8u9fpyjqp6&sssrc=2349624&ssuid=i8u9fpyjqp6&var=&widget_ver=artemis&media=COPY
I perfer PayPal
rg에도 가능할까요
Yes, you can purchase small size of lights
what if the led runs out of battery
No battery inside. No need to charge
tên của đèn led ấy là gì vậy‽
it is the magnetic led, isn't it?
Not magnetic control leds
@@hagensu1748 so,
how does it work?
@@hothinh8318 there is a base behind the Gundam, it connects to the power, and generates a magnetic field for the wireless leds.
When the wireless leds close to this field, they are lighted up
@@hagensu1748 it's awesome
Thanks for your replies
Where can I buy those led 🥵
I designed these leds and also sell them. If you are interested in, just let me know. Thanks
@@hagensu1748 where did you sell it?
@@hagensu1748 can you explain more about this led because this is totally game changer
@@nub_gamers5457 do you have a messenger account.
If have.
my acc
Wptlight BL
Could you add me?
wer to buy???
It is my own product
I also sell it
Link?
Add my Facebook account Wptlight BL
Link pls for led lights
www.ebay.com/itm/385160308369?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=i8u9fpyjqp6&sssrc=2349624&ssuid=i8u9fpyjqp6&var=&widget_ver=artemis&media=COPY
Price?
the base is 59usd
Led is 3.5usd/box(5 pcs leds)
Di Indo ada nda y?
Caring Mecha Model
but I think it is quite expensive there
Where can we get those
I sell them 😊
@@hagensu1748 wow ;-;
@@kalaicheluanmathurai4377 they are my own products
@@hagensu1748 cool bro
@@kalaicheluanmathurai4377 thanks
What about for a real grade
We have smaller leds for rg
@@hagensu1748 where could I get some
@@eliasjuarez129 I sell them, they are my own product. Add my Facebook account Wptlight BL
Now change the batteries
No batteries inside
@@hagensu1748 what's powering all those individual lights then? Lol
@@Kids_Scissors there is a emitter board behind the gunpla, it connects to the power and generates a magnetic field for the wireless leds
@@hagensu1748 oh wow that's actually kinda cool o.o
I messaged you on Facebook, check message requests if you don’t see it. I have same name as my TH-cam name.
Thanks bro
I know this is weird but do you still reply ?
yes. what can I help you
@@hagensu1748 Actually I want to ask what MG unicorn did you use ? And we all know that non MGEX unicorn are notoriously known for easy to break apart so is it the ver ka or ova ver ?
@@nazrulaqmar4891 it is ova version. in fact, not many differences between ova and ka
Yes but many people said it is easy to break apart
@@nazrulaqmar4891 I think it is really cool enough for an unicorn with a stand up pose. don't play it too much😅
How to bye thes led
I sell these leds
How much
I am Malaysian
@@1954_gojira1 53. 9 usd for the base. 2.7-3.7usd for a box of led.
And there a shipping fee
Ok but I am Malaysian
you used led what how
LBASE wireless lights
if you need more information, please add my Facebook account Wptlight BL
He is too broke to buy the actual led unicorn mg like me.😜😜😜😜😜😜
Coz led strip is garbage
@@davidlopez879 nope. Because your a noob and cant install in without breaking it. Gundam noob be like😂🤣😂😂🤣🤣
💀💀💀 it’s much harder to make wireless LEDS rather than a LED sheet, and besides even “pro” gunpla builders have broken the strip. It’s much better and less costly to constantly buy double a batteries for it.
@@allmatrixstudios1424 bro said less costly. L BOZO bro has to use dead leds
@@rohanmehta1515 I doubt you could even afford the MGEX let alone the RG seeing how childish you are especially after replying after 5 months that’s just pathetic
what is you facebook page?
Wptlight BL
This my account
He 1/144?
MG 1/100
@@hagensu1748 cool
Where can you buy these LEDs?
you can buy from me