Hi guys, follow me as i build my dream setup!! i have been dreaming about getting a tray for a long time now, this one popped up for sale and i jumped on it! more episodes coming soon!!
Awesome 👏 . Can't wait to see more videos soon my friend. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Hey mate, really appreciate you making this video! I just shortened my dual cab tray from 2m to 1.7m and couldn’t be happier with the finish. Makes the Ute look so much cleaner!
Hey Mate,Is it essential to remove the headboard to enable you to get the side angles off. I am wanting to replace the rear plank that has been damaged. Thank Alan
Nice vid mate... do you know by chance what the shortest is you can fit.. I have a short 1360 steel tray I'm thinking of putting on. By my measurements it looks like it will be close to flush with the chassis...
Hey Roam Lyfe, looking to purchase a snorkel for my car but would consider fabricating one. Was wonder if yours is custom because I love the style. Cheers!
Nice work bloke! I just shortened mine the other day too and it came up mint. Glad I watched this though as I was thinking about giving mine a clean up as well. Did you use the Septone stuff?
@@RoamLyfe yeah easy as man. I ended up using the Septone Ali Brite stuff from supercheap and it worked a charm! It wasn’t on the car yet so I was able to go silly with it but yeah good to know for future cleans
Hey mate where did you get the lock hinges from for the back bit that opens for your draw? And maybe if possible can you show me some more photos of your draw finished please
@@RoamLyfe bugger ok no worries. Cheers for the video too I made my tray off this video and almost ready for install just trying to figure out the draw system
Hi mate, you can have someone make one up at a aluminium fab shop! It would just be a case of going down there and chatting to someone! Maybe show them a photo of kind 😊! They are all custom so every one will be differant!
Awesome 👏 . Can't wait to see more videos soon my friend. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Hey mate, really appreciate you making this video! I just shortened my dual cab tray from 2m to 1.7m and couldn’t be happier with the finish. Makes the Ute look so much cleaner!
Hey mate exact same tray as mine couldn’t find anything on the tube now I know what to do to my tray I’m a 100 mm long with 2 canopy’s well done
glad i could help, thanks for watching :)
Mate cheers for the vid this is all i needed to convince me to just do it myself and save $hitloads 👍 looks wicked
Hey bro check my channel out if you like the content subscribe and help me hit 300 subs :)
Gday mate this was a great video. Was wondering if you can shorten from the other end to save time moving ladder rack mounts / tail lamps etc.
i also wanna do this
Awesome video, I’m going to do this to mine! 👌
Hey Mate,Is it essential to remove the headboard to enable you to get the side angles off. I am wanting to replace the rear plank that has been damaged. Thank Alan
Nice vid mate... do you know by chance what the shortest is you can fit..
I have a short 1360 steel tray I'm thinking of putting on. By my measurements it looks like it will be close to flush with the chassis...
Hi mate you could Probly get away with 1500, mine is 1550!
Hey mate where did you get your rear light panel can’t find anything similar anywhere? And can’t be buggered making one myself
Hey Roam Lyfe, looking to purchase a snorkel for my car but would consider fabricating one. Was wonder if yours is custom because I love the style. Cheers!
Thank you. Very useful.
thanks for the comment mate! glad i could help!
What’s the width of the tray? Looks awesome.
how thick are them floor panels if you were to replace them with something else ?
thank you for detail video as further plan on my 4x4 light big truck
No worries mate, any questions just yell out! Glad I could help!
awesome vid mate. very informative
Hey bro check my channel out if you like the content subscribe and help me hit 300 subs :)
Good work
thanks mate :)
Nice work bloke! I just shortened mine the other day too and it came up mint. Glad I watched this though as I was thinking about giving mine a clean up as well. Did you use the Septone stuff?
I can’t remember the brand!! Just be careful not to get it on any of your chassis!
@@RoamLyfe yeah easy as man. I ended up using the Septone Ali Brite stuff from supercheap and it worked a charm! It wasn’t on the car yet so I was able to go silly with it but yeah good to know for future cleans
great vid mate! looks awesome. just done this to my ute. where abouts did you get that custom rear section made up?
Hey bro check my channel out if you like the content subscribe and help me hit 300 subs :)
U should do more time lapses
It would make the videos 100% better
thanks for the advise! will do :)
Where can you buy those slats?
Hey mate where did you get the lock hinges from for the back bit that opens for your draw? And maybe if possible can you show me some more photos of your draw finished please
They actually came with the tray sorry! And I havnt finished the draw yet 😓
@@RoamLyfe bugger ok no worries. Cheers for the video too I made my tray off this video and almost ready for install just trying to figure out the draw system
Get vid mate where abouts did u get the rear tail lights from
George Bolton hey mate I didn’t buy them but I’m sure you could find them at jaycar or a auto sparky shop
They look like roadvision leds, br230's, available from bursons too, great lights roadvision.com.au/combination-lamps/
Was this a standard d23 allow tray? Or was it off another Ute?
Hey mate it’s a triple M alloy tray, I’m not to sure what it originally came off but I brought it off a bloke who had it fitted to a np300
If I got a single cab tray for a dual cab car and cut it down to size would it still bolt on properly?
I want to know this too
Hey mate great vid! Did you make the rear section for the tray?
Chris Brittain no mate it came like that already! But any alloy blokes could whip that up pretty easily!
What is the sizing of the back section light holder
Hey mate how much was it roughly the clean the tray thanks
www.supercheapauto.com.au/p/septone-septone-ali-brite-aluminium-cleaner---1-litre/1747.html
What do you do for work? got a nice shed mate.
Small engine and hydraulic repairs, mainly pressure cleaners and industrial cleaning equipment! I wish it was my shed!
Where’d you get the back part
Hi mate, you can have someone make one up at a aluminium fab shop! It would just be a case of going down there and chatting to someone! Maybe show them a photo of kind 😊! They are all custom so every one will be differant!
What material bolts did you use
Hey bro check my channel out if you like the content subscribe and help me hit 300 subs :)
How much does it weigh with nothing on it?
jacob dawson it weighs around about the 80-100 kgs mate! Me and another person can lift it!
round off those sharp edges :P and kiss that tray haha
Rounded them off the next day haha the misses made me do it