Its always that passenger caliper for me that sticks. Good job and getting things working. Nothing wrong with new calipers, pads and rotors, especially if it will be performing daily duties! Keep it up, love the old school trucks!
Well I'm glad you got the other bolt hole straight on the starter I've had that happen to me that's why I suggested to you glad you got her going man Keep On Keepin On
I don't know what it is about old duallies and bees. Bees love em. I park mine for 3 weeks, take it to the dump, back up to the compactor and notice everybody giving me a wide berth. Well, more accurately they're running for cover. Am I on fire or something? No. It's worse. Evidently driving down the road had activated at least 3 hornet's nests up under the frame in some very hard to get to places. I get them out but they just keep coming back. It's the same thing at the end of every summer. And it's only that truck!
Most likely collapse front brake hose is your issue. Specially if its pulling while braking. Pretty common issue to have on them. I bet the caliper is just fine.
I don’t think it is but that is a common issue. The piston would have collapsed into the caliper when I cracked the bleeder screw if it was the problem.
Caliper hoses are probably collapsed. Can only compress fluid so far also fluid can’t go back in or you can slip a bit in due to hydraulic force but can’t get back out. Release your caliper bleeder and try to compress. If it works it’s most likely your rubber line. Use starter bolts. They are knurled so they are less prone to backing out.
Change both front calipers. My Silverado rear caliper would not unstick. Replace hood. It's extra crispy. Replace alternator the noise is bearing coming bad. Best Wishes
In my experience, when a brake locks up like that, it always ends up being a failed hose. The hoses tend to collapse internally over time, and you won't see it from just looking at it.
It always confuses me when I see your sub count with the content you film an the trucks you have an how natural you are in front of the camera I don't know how you don't have 100k subscribers your content is the same if not better than other channels that have 100k subs but I guess you can have something to work forward to
That was hilarious dad gets his boys to go for the first ride then he wants to know what they think about the truck but in total kid world all they care about is the lizzard skeleton in the cab poor dad is thinking come on guys
You know I'm kind of a weirdo anytime a caliber sticks to me I don't care about my mechanic ability he gets replaced with a new apartment. No questions asked what's the problem with that Siri is unless you know how to tear it all the way down and rebuild it with new seals and so forth and clean things up where would operate as a new caliper for me it's got to go you taking an awful awful awful chance been there done that did they with my 1994 Silverado and the brakes fail so since that has happened to me I text hot takes no freaking chances I don't care how old a party is it's getting replaced with a OEM part if the lines are crappy Gary getting replaced complete open Facebook slice replace replace replace replace it's a hell of a feeling driving 70 mph and your brakes fail because you want to be cheap you got young kids you got young kids I realize you were younger person and I'm giving you the best advice any man will ever give a young man never take chances with your family your life or your vehicle you fix it or you do not drive it
Its always that passenger caliper for me that sticks. Good job and getting things working. Nothing wrong with new calipers, pads and rotors, especially if it will be performing daily duties! Keep it up, love the old school trucks!
Appreciate you not using foul language, very cool rig!
Thanks!! I used too but found out we have youngens that watch the channel and decided to clean it up. Gotta keep them involved!
Great job, loving the truck and I know Karen is too. I’m pretty sure I seen her admiring it as you drove around the neighborhood 😁
Man I love the look of this truck. Engine runs good too. Also, don't forget to check your brake hoses.
Well I'm glad you got the other bolt hole straight on the starter I've had that happen to me that's why I suggested to you glad you got her going man Keep On Keepin On
I bet you could find an original paint hood for that truck. Buckskin color. Love the color scheme.
Nice to see this thing running!
Check to make sure the tank(s) vents are working properly. It will cause weird fuel problems.. loving the vids keep em coming.
I’ll take a look at that this weekend. Thanks man!
Loved the intro man! So smooth and fluid
Appreciate it!
Idk how i came across this channel, but im staying lol keep it going brother!!!
Great video man. O’Reilly has a one man bleeder kit for $10 I just did my square body and wrangler in under an hour.
Love the truck just come across your videos an I was looking an you look just like Heath Ledger keep up the great videos
Sounds good running. Looking forward to how far you take the rebuild on this one.
good job! love the added back ground music! keep up the good work!
Such a cool truck man. 👊🏻🤘🏻
Thanks man!
Cool truck and looks great with the new wheels. Looks like the lug nuts are backwards
Thanks man! The dually wheels are hub centric so they don’t need the tapered end towards the wheels. Good catch!!
Love the video bro & love the square body I recently bought one myself that I am working on also ,Good luck on getting it going !!
I don't know what it is about old duallies and bees. Bees love em. I park mine for 3 weeks, take it to the dump, back up to the compactor and notice everybody giving me a wide berth. Well, more accurately they're running for cover. Am I on fire or something? No. It's worse. Evidently driving down the road had activated at least 3 hornet's nests up under the frame in some very hard to get to places. I get them out but they just keep coming back. It's the same thing at the end of every summer. And it's only that truck!
Change the callipers and the hoses, also if your alternator is at 12v you might have to change that should be 14-15v
Shouldn't be more at 13,14 at most.
@@thehemiolds455 13.5-15v is a good alternator. Just check a picture of a battery tester. 13.5-15 is green for good. I get lots that are at 15v.
Love the truck. Hope to see more video's on it. I have an 88 and I love driving it. But terrible mpg. I pull a 35ft 5th wheel with mine.
Glad you strapped the hood
The tapered side of the lugnut points in toward the truck. The lugnuts are on backwards. =)
Chevy hoods are always bent in the middle... Lovign the dually build
Wheels look good
Ready to see this slammed on semi wheels
Me too dude!!
@@yeahbuddygarage gonna ls swap this one?
It’s not always the caliper. Sometimes the hoses swell and won’t let the pressure return.
Change the hoses too
Trucks looking good my guy. Those rubber lines could be collapsed as well giving you some stuck issues.
Very true!! New calipers, rubber hoses and pads are on the way 😎
Definitely change the calipers and brake hoses for the calipers while you are at it.
Most likely collapse front brake hose is your issue. Specially if its pulling while braking. Pretty common issue to have on them. I bet the caliper is just fine.
I don’t think it is but that is a common issue. The piston would have collapsed into the caliper when I cracked the bleeder screw if it was the problem.
Get a reverse bleeder for the brakes they work really good
Hello from Romania
the old wheels just need a rub don with some sand paper then rattle can tune up then good too go you got some nice rollers
good o taco hood lol had same problem with my 78
Caliper hoses are probably collapsed. Can only compress fluid so far also fluid can’t go back in or you can slip a bit in due to hydraulic force but can’t get back out. Release your caliper bleeder and try to compress. If it works it’s most likely your rubber line.
Use starter bolts. They are knurled so they are less prone to backing out.
It would look awesome it it had a 4 inch lift and a 4wd swap
Change both front calipers. My Silverado rear caliper would not unstick. Replace hood. It's extra crispy. Replace alternator the noise is bearing coming bad. Best Wishes
Great progress but please clean the inside just a little at least bro. Great video 🤙
In my experience, when a brake locks up like that, it always ends up being a failed hose. The hoses tend to collapse internally over time, and you won't see it from just looking at it.
Looks like Teddy sitting in the driveway
It would be a good idea to check your alternator belt before you replace your alternator.
yeah, that hood is a little chewy. overall gonna be a great builder.
Ahhhh man! Karen was furious when she saw you drive by! Shoulda put the lizard skeleton NOT in her mailbox!!!! Lmao!
🤣🤣
😂 Fully Full..
The Three Musketeers💪🏼😎and a hot mommy 💗
Great video man
but if you could remove the music i would be greatful
need a Ronnie Coleman yeah buddy!
Bro that hood is cracking me up… like a crispy piece of bacon..
Bro its the worst I’ve seen 🤣
Should ask the neighbor if she wants to go for a ride
🤣🤣
Use a old brake pad when your opening a caliper keeps from damaging parts is all
тачка шикарная , но думаю чтоб привести ее в более менее рабочее состояние , работы здесь очень много
U was closer to me I’d give you a good hood I’m not using it and it’s in mint condition
What happened to cookie monster????
Just started back on that one this week. New fuel cell and starting to metal work the cab 😎
I will donate a hood to the project if you don't mind driving to cocoa to get it
One came with the truck but I appreciate it!!
Change rubber lines probley collapsed
It always confuses me when I see your sub count with the content you film an the trucks you have an how natural you are in front of the camera I don't know how you don't have 100k subscribers your content is the same if not better than other channels that have 100k subs but I guess you can have something to work forward to
That was hilarious dad gets his boys to go for the first ride then he wants to know what they think about the truck but in total kid world all they care about is the lizzard skeleton in the cab poor dad is thinking come on guys
Thanks man!! Hoping to get there one day. Got some big news coming that will help me focus on making better videos. 😎
Algorithm comment 😎
lol Much appreciated!
Ask Karen for a ride.
🤣🤣
I have a strong suspicion that you know very little about working on cars
You know I'm kind of a weirdo anytime a caliber sticks to me I don't care about my mechanic ability he gets replaced with a new apartment. No questions asked what's the problem with that Siri is unless you know how to tear it all the way down and rebuild it with new seals and so forth and clean things up where would operate as a new caliper for me it's got to go you taking an awful awful awful chance been there done that did they with my 1994 Silverado and the brakes fail so since that has happened to me I text hot takes no freaking chances I don't care how old a party is it's getting replaced with a OEM part if the lines are crappy Gary getting replaced complete open Facebook slice replace replace replace replace it's a hell of a feeling driving 70 mph and your brakes fail because you want to be cheap you got young kids you got young kids I realize you were younger person and I'm giving you the best advice any man will ever give a young man never take chances with your family your life or your vehicle you fix it or you do not drive it