Sawing a Pecan Log That Traveled 1200 Miles
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Sawing Pecan with Phil: • Sawing Mississippi Pec...
Sawing Live Oak: • Sawing Live Oak [It's ...
Plans for my Sawmill: www.mattcremon...
Building my Sawmill: • Wide Cutting Bandsaw M...
Products Used
Log Tongs: amzn.to/2KXxJZR
60" Peavey - amzn.to/2X8WtS9
78" Cant Hook - amzn.to/2Is0RY1
Hi-Lift Jack: amzn.to/2nwL9Nq
Hearing Protection: amzn.to/2xysd8q
Thank you to Triton Tools and Horton Brasses for sponsoring my work
www.tritontools...
www.horton-bra...
Support What I Do: www.mattcremona...
Check out Wood Talk, a podcast about woodworking that I co-host:
www.woodtalksho...
/ woodtalk
Website: mattcremona.com
Instagram: / mattcremona
Twitter: / mattcremona
Facebook: / mattcremonaww
Email: matt@mattcremona.com
Hi Matt. I’m curious as to why you haven’t chosen to collect the sawdust. Use it for your own heating by using one of the really simple log compressors, or you could sell it (not to mention saving a ton of work in sweeping up). Would seem a good way to reduce waste, increase income (or reduce expenditure), and allow the beautiful wood to do more things for more people.
Thanks, from the UK
Love the reveal! Nice colors and a big one!🤠👍
Beautiful wood. Commercially pecan is sold as hickory. Same family. In the early days of this country they planted live oaks in Florida and tried to tend them to make them grow curved to use the wood for the ribs in wooden ships for the navy. Before they came to full size iron ships took over.
As a native Texan, I can especially appreciate this vid. Both Pecan and Live Oak are familiar species to me, as I grew up around so many of them. Pecan is great to work with. Although hard, it not as brittle as one might expect. Live Oak is extremely dense and can be a bit of a challenge, but once sanded smooth and finished, it becomes virtually indestructible. Another southern species I know you would enjoy is Mesquite, also very dense, but the color of the heartwood is a deep reddish brown. Hope you can get your hands on some one day. As always, thanks for another great vid!
G Bruce don't forget to vote for Beto O'Rourke on the coming senate election !
Love the cordless drill in place of the hand crank. Work smarter, not harder. By the way. The a is soft. A pee can is something you keep next to the bed so you don't have to go all the way out to the outhouse in the middle of the night.
I remember when there were leaves on the trees and green grass.... been a while since this was filmed, but thanks for sharing it.
Look forward to seeing what you do with it. 👍
Matthew C. Whats cool is was cutting a Tree Down to Put on the Mill and started Cutting through it and Ran into a RAKE Where someone had Lean it against the Tree Years ago and Tree had grew around it, had NO Idea it was in the Tree in till I Started Cutting through it.. Has been the Best Looking markings I have ever SEEN in a Log to Date. Wish you were not to far would send you a Trailer of Logs, if you had some Space for Log Storage . lol A Good Friend Has a Land Clearing Bis. So lets just Say i have some good logs Laying Around.. lol And Always Thank You for your Time Sir...
That Pecan is just amazing, so pretty.
Good thing that log has traveled so far, it might last up there. Even though it's pretty the bugs and bacteria in the south destroy it in no time, so not a lot of people use pecan even though the trunks can be found in abundance. Up there anything you make out of it should last a couple generations at least though.
They get eaten alive most of the time. The trees are infamous for keeping your yard littered with punky dropped limbs. It's like having an extra adolescent child to clean up after.
If it sits for any significant period before you use it, I'd spray it with some anti-bacteria/anti-fungal agent just to make sure it doesn't start to soften up, but you've definitely got more time to work with it than we'd have down here in the south.
I've never had any bugs or bacteria bother any of mine and they all air dry. I will keep that in mind though.
I had by the Pecan tree trimmed. It’s quite large the truck is probably a little bigger than the one that you’re working on now. I tried finding someone to buy the larger chunks because it’s a shame just to burn it. I still have a few large chunks left, plus a branch that we haven’t taken down because it’s too heavy and will destroy the fence. If I can sell it I’d be thrilled. You’ll be worth removing that section of fence and then repairing it. Too bad nobody’s interested around here I live in Missouri. The wood Hass to be interesting, it is filled with bug holes...
I wish I had your set up, I’m sure that every piece would be beautiful, the ones with holes filled with polymer.
Beautiful, beautiful wood. Going to make a bunch of people! very happy when you are donr!
Man this makes me remember A live edge pecan kitchen top I built when I lived in ms. I was just ripping through sanding discs and epoxy lol
We just finished a waterfall desk out of pecan. Its gorgeous stuff!
As soon as I saw this video, I knew I wanted one, but did not think it was possible, untill I saw the 4 of you, April & two others build her mill.
Great job.
Very unique looking wood. Thanks for sharing.
Awesome looking slabs! Thanks for posting Matt🙂 it’s nice to see you mill your off cuts the same way I do mine, salvaging 😂
hahaha I tend to go for high yield :D
I'm from Texas, pecan trees are abundant here, best finish is a linseed oil or natural watco, wood darkens over time and is beautiful, thanks for pronouncing it right too
I really enjoy your enthusiasm. God bless, ATB, Bill
Awesome, I remember that video, super cool to see the rest get sliced. Thanks again for another rad video!
Man, Matt, you're amassing quite a lovely yard of lumber! I also liked your imaginative use of your drill to power the feed assembly. Thanks, as always for sharing your love of wood with us.
So, when are you going to buy a track loader with a set of forks, before the back surgery or afterwards?
Larry Copenhaver one day at a time...
I absolutely love your channel but I've always wondered what your neighbors think of your work with all the noise and scrap around your yard. Keep up the quality content!
Yep have one in the front yard that will be coming down next year....but no where as big as this one....
As a few have already said it is a great wood to use in a smoker....have a bbq place down the street and that is his wood of choice...stay warm
Thanks Robert!
I have not seen Matt this excited in a while nice to see gave me a chuckle
That is a baby pecan log , you should see some of the big ones down here in Texas , I have 4 in my yard that are over 36 inches across at the base and 5 more around 24 inches or so . I think you need some kind of roller rack you can set up to slide the slabs onto and then just slide them down the line to where you want to stack them .
i love your energy and your passion. keep doing what you love, record it and ill keep watching.
If it weren't for that big pond I gotta cross I would definitly get a couple of those, WOW!
hahaha that pond is always making things difficult
Sitting at my desk with my Matt Cremona hoodie on, watching Matt saw up a nice pecan log...nuff said.
Represent
HI MATT!
LIKED THIS VID!
I REALLY STUDIED YOUR SAWMILL
AND IT IS BIG!!
I OFTEN WONDERED ABOUT DOING TWO OR MORE LOGS AT ONCE AND THIS VID ANSWERED
THAT!
Fun to see you cut those boards. Thanks for the wonderful videos.
I spent a couple few years in a southern oregon specialty mill, always wanted to do something like this. I still do actually
I always appreciate how much you enjoy what you do.
You really have got to start eating porridge. Best regards from a very wet England.
A beautimous log! As soon as I saw that elongated arched bullseye at 4:20 I thought of you making a playhouse for the kids with that as the door. Guild project!
Beautiful log, beautiful slabs
Matthew, the off cuts from that pecan will work great for smoking food. Pecan is the female of hickory.
Did not know that! That explains a lot! Thanks 😀
I built my son's bed out of rustic (knotty) pecan, it was beautiful, but crazy heavy and hard on tool blades. I think that stuff would make some beautiful doors or cabinets.
I'm surrounded by Pecan tress. I never knew how hard it was until I tried "milling" down a few pieces to make knife scales.
New drinking game..barke inclusion..everyone drinks.lol merry Christmas
Awesome stuff Matt, looking forward to seeing you put it to use! 😃👍🏻👊🏻
Nice slabs! You are giving that saw a good workout :)
Pecan has always been my favorite! Awesome video as always!
Thanks donny! Hope you’re having fun wherever you are!
I would not describe American as a particularly typical country given its size. We have some many different regions here in the US. I am not surprised there is such a huge difference in wood between them.
Up here in the pnw it's firs and cedar all over the place!
Matt, i love your videos. However, if you put an iron or galvanized pipe over the end of your log turner handle thus extending its length it will provide more torque for the same muscle. Easier for the humungous trees you roll around on your sawmill.
I'm from Louisiana. Since pecan is a fruit producing tree, usually a tree is maintained as long as it can produce fruit. The fruit crop negates a wood crop. Normally by the time a tree can no longer produce fruit, it is usually too far gone for wood. Because of land development and storms, some mature, but not decayed appear, but not a lot. I often wondered what the characteristics of the wood would be to make things. It will be interesting to see what happens. In some ways, it is an "exotic" wood even where the trees grow.
This one had to be taken down to build a house in Gulfport, MS. I was not going to let it go tot he dump just to rot.
I grew up in Georgia in a Pecan grove. I spent many a day gathering pecans but never realized what great wood was in the trees. It would be my choice for a table. I noticed you using a drill motor on the winch when sawing the boards. I always wondered why you didn't use a power drive on the saw instead of hand cranking. I figured it was so you could control the advance speed but you could install a variable speed drive and save your arm.
I assumed it was so he had feedback so he could speed up or go slower, or in case he hit something.
Looks really nice Matt, I love how you get so excited about the colors n grains that get revealed on your slabs, keep up the good work !
thanks!
Matt.....can I suggest you try to purchase / source a set of carpet wheels (it's akin to a seesaw on wheels which carpet fitters use to transport broadloom carpets from A- B)....I'm sure you could modify one of these to assist you and your back in shifting these huge and heavy slabs of wood.
Great stuff Matt!
That’s just amazing! Slab with its own painting. Nice. Great work and keep it up. Love the vids.
Also, I know you have a reason for most everything you do (or don’t do) but.... would a hose work better for the sawmill area? I figure this isn’t the first time you’ve heard it and that’s why I’m guessing it’s intentional. 😆
Thanks again. Really great stuff.
Amazing that you have shorts and T-shirt weather in mid-November in Minnesota. ;-) I love the power feed solution you have for the saw carriage. (cordless drill). LOL Great looking slabs as usual.
Thank you god bless y’all
great to see your mill, I may have missed it, but have you ever milled any locust?...it is an amazing hard strong and rot resistant wood which I am a big fan of...please mill one if you get a chance
It's on my list of woods I'd like to acquire.
I can see river tables from that pecan log slabs you cut.
I have about a15-20 acre pecan grove. It's nice to see what I potentially have in the lumber. It's also nice to see you cut up some for cabinetry boards. Not everyone can handle slabs. I'm wondering how pecan would work for board and batten siding. Maybe a preservative would be needed? It would be better as an interior paneling?
Another OOOh AAAH day!
Instead of using your winch body as a fulcrum, perhaps you could add a roller bar above the winch on the back of the mill.
Really great looking Slabs!!! 👍😉 never came across with Pecan over here unfortunately.
Nice video Matt! i like the look of the pecan :) Thank you for sharing with us.👌👍😎JP
That pecan would make for a fantastic guitar top ;-)
Maybe for an electric. Not for an acoustic. It would make great necks and or fret boards for either.
nice wood matt... i like it
QUESTION re your blades:
how much does each blade cost? How long do they last in terms of numbers of trees you can slab? And if they able to be resharpened do you do that yourself with a file or a sharpening jig?
Good Question Sir
Quite the workout.
Nice passion.
thank you Matt
It's good seeing the pecan tree.
Wow. A bark inclusion in the first cut!
Hey Matt, I see that you air dry a lot of lumber. Do you have or have you considered building a small kiln not so much from the drying perspective, but rather to kill off any invasive species, larvae, and etc. -Thanks, Neil@ShopCuts
I’m also in Minnesota. If you are ever interested in the guitar builder market for your materials we should chat.
Nice work Matthew, thx, Adam, Tofino.CA
its fun to see him get so excited :)
Main usage of water: SPLASH OVER WEWD! OEH OE OE OE
You need to save some of those offcuts to smoke some meat with. Similar to hickory but a hint sweeter. I use a lot of it here in central Texas for smoking.
That Phil and Harry sound like some cool cats! I'll trade you some more pecan and live oak for some walnut and maple! Great video as always.
They're alright :D
very ingenious, Matthew !!!
Do you always cut these slabs 8/4? Why so? How do you then take them down to 4/4 when you are ready to use? Thanks again for making this, that red spalted is beautiful.
That pecan be hard to chip from chunk for the smoker.
I didn't think about the smoker...
A few more Cheerios Matt. Lol
Funny enough, I was the heaviest I’d ever been when I recorded this
Cracks and crotches of the human variety and then feathering from the avian variety. Where do the knots come from?
Oh Matt...how do I get my hands on one of those beautiful pecan slabs?! :o).
This video was not shot on November 13th. First clue, leaves on the trees, second clue, shorts and a t-shirt, third clue, parka and stocking cap on wrap up. I am just kidding, it is damn cold up here in the northern Midwest right now so love seeing work when the weather was friendlier. Great looking log and lumber.
We've come a long way from August when I cut this log
No pecan here in NS . It looks nice . I would guess you put the bucket there . haha .
Matt you really need to invest in a forklift. Those slabs will make you old before your time.
I understand your not able to hire a permanent assistant, but would love it if you found some informal apprentice, like a local kid who just wants to learn some woodworking. I'm thinking both for help with some of the lifting and for the social dynamic, someone who can get smitten by your love for life and the craft.
Do you ever save bowel blanks if I was a young man I probably would get myself a rig of my own but for now for now I’m makes shavings. Luvyr show
Is this the first time you've used a drill to move the saw?
Matt, you shouldn’t cut those beautiful slabs up. They are from a far far away land, so you should mount them on the ceiling and wall - haha.
Wow, Gulfport, I am about 60 miles north of Gulfport and have relatives in Minnesota, around the Lake Crystal area.
0akgrove
Hub city citizen here. I've lived in Hattiesburg for 2.5 years now, and we love it.
Maybe we should get some area woodworkers together sometime.
Once some of that pecan is dried, you should ship a couple of pieces to Crimson Guitar. (hint, hint)
When you reveal these logs, do you also have thoughts of what you want to make from them? Does the “reveal party” give you any ideas or inspiration?
the majority of his lumber goes up for sale i believe
Great slabs!
After you finish the trailer you need to build a mobile gantry or something to help you move all the slabs around. Back injuries are no fun.
My trailer is a mobile gantry
When and what is your next build
,,, and it's refreshing to hear your pronunciation,,,
Are you using a small inflatable bag/pump system to lift the ends of the slabs while stickering? It looks like you pulled something out from the end a couple of times... I also mill and stack larger stuff solo and struggle to get the last sticker in each time. Any tip you have to share about that would be greatly appreciated. Thanks and keep up the great content!
yes, one of these guys: amzn.to/2Kju0VD This was the first time I've tried it for stacking and it was amazing. That last sticker is always the hardest!
Logs from the south....specifically , the Louisiana swamps. Sunken and submerged for years, Cypress logs lost in the swamp from loggers years ago. Have you ever had any desire to acquire any and mill them? Very expensive. I guess they acquire a magnificent intricate grain design from being submerged for so long. I remember watching the Cypress hunters on The History Channel. www.custommade.com/blog/underwater-timber/
Excellent video.....how much did you pay for a trunk of that size ??
Mathew would you consider sending me 2 3 ft pieces of the spalted pecan lumber so I could make a clock out of it let me know thanks love your sawmill videos and your wood work thanks eric
He’d probably sell it to you
Save the waste for BBQ wood. Great smoke especially for chicken!
Wish you lived close to me...I'd give you all kinds of logs! You ever find yourself in Missouri & need logs, let me know.
STAY SAFE