Peg board for air flow with shop vac, propane grill control with steal roof panels, and vacuum forming plastic sheet. Not going to lie this is the best DIY vacuum forming machine I've seen.
@@cuustomfireguy 🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him. More ....
Nicely done! A tip for next time: just use the shopvac that can create the strongest vacuum; when you add more shopvacs in parallel all that accomplishes is sucking faster, not harder. Once the air is mostly gone from under the plastic, those extra (weaker) shopvacs essentially just become leaks for the strongest shopvac and will prevent it from being able to pull the strongest vacuum it can as air will be pulled in backwards through the weaker shopvacs.
That's actually pretty dang badass, I see a little room for improvement of course but y'all made it work with teamwork! more people should be doin this.
You know how you think of things then some dose it wow thank you so much I want to dual my truck and I have to make fenders for it will be keeping an eye out for more content like this once again thanks for showing what can be done
The finished fenders are shown on my tic toc account. Petefireman or peteryancustomfir. I'll find a few pics and post to TH-cam..I never thought of it till now...
Hey there! Built a similar set up and wondering: 1. How thick was your ABS ..&.. 2. How long did you heat it (or) what temp did you get it to? Incredible work my man!
Sorry for late response... the mold frame is put away in shed.. for best response.. its a peg board on a frame with blocks placed inside to hold the weight of fenders and the suction..
@@cuustomfireguy Thanks for that, I really appreciate it. May I ask, did you ever use your system on a clear plastic / perspex ? Like, for a window. And if so, did it leave marks on the transparancy? Thanks again.
ABS plastic tends to get pretty brittle in the cold.. I've been researching more flexible compounds.. but yes the vacuum mold can make alot of parts.. the smaller they are the more difficult it becomes..
we only went by how soft it was. and how far down it drooped . we didn't take a temp. if we let it go any longer the plastic would of started to burn because it was drooped so much . it was 12 inches from flames
Remarkably durable. It will take a spin smash up.. to totally destroy them.. but the rubbing racing will not be a problem. Our class is NO!! Contact.... so we haven't tested it in three years
Your correct.. the idea of heating up the fenders was talked about.. really if we went back to 3mil poly vs.4.0 the plastic is much more flexible for longer mold time.. being fenders we used thicker plastic. We Molded two nose cones two rear ends . And fives years later we made the fenders. All for fun.. thanks for watching..
The idea that you overload a circuit so easily is really weird to me. The last time did happened was more then 40 years ago at my grandmothers old farm house
Why did you keep turning the vacuum back on over and over also why leave it on so long the plastic would have cooled and no longer been able to mold anymore literally after just seconds so this whole video was actually pretty stupid.🤷♂️
Peg board for air flow with shop vac, propane grill control with steal roof panels, and vacuum forming plastic sheet. Not going to lie this is the best DIY vacuum forming machine I've seen.
Not going to lie... we laugh at the response of other racers that look aT it and say.."can you make me a set
@@cuustomfireguy 🔴 What Is Islam?
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
More ....
Think zinc will start to create toxic fumes at 150° c
Nicely done! A tip for next time: just use the shopvac that can create the strongest vacuum; when you add more shopvacs in parallel all that accomplishes is sucking faster, not harder. Once the air is mostly gone from under the plastic, those extra (weaker) shopvacs essentially just become leaks for the strongest shopvac and will prevent it from being able to pull the strongest vacuum it can as air will be pulled in backwards through the weaker shopvacs.
Literallly reverse compound ❤
This is so baddass. I've never seen anyone build their own vacuum molding set up. You guys are true masters of this art!
That's actually pretty dang badass, I see a little room for improvement of course but y'all made it work with teamwork! more people should be doin this.
Where there is a will, there is a way! I've been doing some research on vacuum forming. I don't need one nearly this big. This is just beauty.
this is the world best home made vacuum forming i ever see. I want to see how gas heat it inside that oven.
Love the concept/ idea that's awesome just fix that breaker problem and maybe a heat gun....
Nice!!👌👍
Your right.. the heat gun was substituted with Bertha torch .. to prevent heat old fenders. which gave more time foe suction and detail..
You know how you think of things then some dose it wow thank you so much I want to dual my truck and I have to make fenders for it will be keeping an eye out for more content like this once again thanks for showing what can be done
Love the ingenuity! Fantastic teamwork too.
This inspired me to build my own version. You got my subscription
What is the thickness of the sheet ?
Very inspiring
fantastic!! add a buck mother over the top to increase productivity and form consistency!!
I was wondering if I could up scale the diy version. Now I know. I might need to make a few mods. To fit my needs but it's awesome
Fascinating, my question is why do you want a super thin floppy car fender?
@@murraymadness4674 #1 light weight. and easily replaced if in a wreck.. its a race car fender
Well done, I can see grandad's intensity.
Please show the finished fender, that'd be much appreciated
The finished fenders are shown on my tic toc account. Petefireman or peteryancustomfir. I'll find a few pics and post to TH-cam..I never thought of it till now...
Dewalter White over here, this is awesome
Haha love it!
Thanks for posting. How was the gas burner set up inside the roof sheeting oven to heat evenly?
I used a four burner grill. I used 7/8 od plumber pipe/black iron. caped the other end . drilled 8th inch holes every 8 inches.
What type of sheet you using
Where do you get the ABS sheets from? Thank you
Can i ask what plastic used and what thickness?
@@kyleewert5630 ABS 3/16
That was great now I know how I'm making my dodge ram baja style fenders
Super cool and great teamwork.
Hey there! Built a similar set up and wondering: 1. How thick was your ABS ..&.. 2. How long did you heat it (or) what temp did you get it to? Incredible work my man!
abs and first 4 sheets were 3/16 last 4 sheets 1/4.. the 1/4 was difficult to heat and the detail wasn't as good...
How does the mold operates
I would like to see in details ,the structure of the vacuum plates
Sorry for late response... the mold frame is put away in shed.. for best response.. its a peg board on a frame with blocks placed inside to hold the weight of fenders and the suction..
@@cuustomfireguy
Thanks , so what kind of plastic do you operates with.
what type of jerry rig do u want
this guy: yes
no hate its so cool how u guys pulled this off
That was really cute at the end the girl in the green shirt wanted to high-five at the same time.
I love the Rayan Family 😍😍😍😍😍😍team work
What kind of burners do you have in the oven you've made ? Many thanks. It's excellent.
We used 1/2 " plumbing pipe. Drilled them every 8 inches no bigger than a 8th... ww put a cap on the other end..
@@cuustomfireguy Thanks for that, I really appreciate it. May I ask, did you ever use your system on a clear plastic / perspex ? Like, for a window. And if so, did it leave marks on the transparancy? Thanks again.
Did u used gas to heating the plastic
Would that work on plastic snowmobile plastics ?
ABS plastic tends to get pretty brittle in the cold.. I've been researching more flexible compounds.. but yes the vacuum mold can make alot of parts.. the smaller they are the more difficult it becomes..
Very good team work 💪🏻
Can do again with same sheet.
What kind of plastic you used?
Whoa nice. Looks pretty. Good job.
im wondering what kind of plastic you used and how tick ? i was thinking ABS and about 3 or 4 mm ¿?
I think it was abs 3 mill... we also bought 4 mill we made the nose cone out of 3 mill... the fenders were 4 mill... thanks for watching my vids
What temp is your sheet heated to in that oven? Just curious!
we only went by how soft it was. and how far down it drooped . we didn't take a temp. if we let it go any longer the plastic would of started to burn because it was drooped so much . it was 12 inches from flames
How much was that plastic sheet and where can I buy it? I've called and searched and some companys wanted $350 for 1 UV ABS sheet like yours
❤❤❤❤приветь из Кыргызстана 😅😅😅😊😊😊😊❤❤❤❤
What is the length and width of the plastic sheet ? Thanks
4x8
This is by far amazing ! What kinda of sheeting are you using ?
Abs 3mil on nose cone and 4 mil on fenders
Are the fenders durable and strong or are they flimsy
Remarkably durable. It will take a spin smash up.. to totally destroy them.. but the rubbing racing will not be a problem. Our class is NO!! Contact.... so we haven't tested it in three years
@@cuustomfireguy can the part be painted after being formed?
@@ONDGAS.. yes
How thick the fenders were ?
The plastic was 3/16 .
Vacuum forming with a 10amp circuit breaker... LOL That plastic cooled off like 15 seconds after placing it down...
Your correct.. the idea of heating up the fenders was talked about.. really if we went back to 3mil poly vs.4.0 the plastic is much more flexible for longer mold time.. being fenders we used thicker plastic. We Molded two nose cones two rear ends . And fives years later we made the fenders. All for fun.. thanks for watching..
@@cuustomfireguy It was a cool video, thank you !!!
Cooooool! 😊😱😍😍😍
What material are you guys using?
Plastic bord
I read through the comments and got the answers...HA! Thx
No end result coverage? A pic even?
Gotta checkout more of our videos, the end result is on the red and white 40 car.
that's refreshingly simple
Saludos 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱
Mit kapcsolgatod a porszivokat?
? English is my only language. Sorry
Please make me a part! 🙏🏼
I would if it wasn't -40° below.. what part.??
@@cuustomfireguy i wanna do a rear diffuser copy, i made one of plastic and fiberglass and bondo but it’s too heavy
Genius!!!!!!!!
The idea that you overload a circuit so easily is really weird to me.
The last time did happened was more then 40 years ago at my grandmothers old farm house
Fun for the whole fam
This is wicked
Hey Clark Griswold hire an electrician
one extension cord to another breaker and you would be in business...
HELL YEA!
Cooll stuff
👋👋👋👋👋👋👋👋
Brilliant
Why did you keep turning the vacuum back on over and over also why leave it on so long the plastic would have cooled and no longer been able to mold anymore literally after just seconds so this whole video was actually pretty stupid.🤷♂️
You should have watched this video first , th-cam.com/video/WGPMadwqPKQ/w-d-xo.html it solves the problem of the circuit breaking.
:-D
Goofy
Your "clamp System" is impressive... Sorry for joking. DWYCWTYH (Do What You Can With Tools You Have), but actually you made it.