Beats just wipping it with a tissue. When you walk over dog dang you wash the underneath on your trainers not just wipe it So why the hell don't you wash your ass Wash your self! Not just wipe Dutty yute!
Thank you. I feel confident I can do this. My problem is in my one bathroom it is very tight so I will have to work a little harder but at least I know what to do.
Yes the water is cold, there are bidets which comes with hot water option as well but you would either need a receptacle close to the toilet or should have a hot water inlet to the toilet.
@take_two_vlogs Hi! I've got the exact same model as the one you're demonstrating. I've had one problem though. The pressure drops if you keep it running for more than a few seconds. Any suggestions?
@@take_two_vlogs Hi! I've got the exact same model as the one you're demonstrating. I've had one problem though. The pressure drops if you keep it running for more than a few seconds. Any suggestions?
@@take_two_vlogs When you were unboxing, the bidet handle looked different from the one in the video. After the installation, are you showing two different styles of the bidet head? In the unboxing video, there is a button-style head, but afterward, you show a different style without a button-just a handheld water sprayer. I am confused.
You have to make sure your toilet supply lines and t-valve have washers in it (sometimes the washers of the supply line are worn out and for the t-valve they are provided separately in the packaging which you have to insert). The threads have to match exactly when tightening the t-valve to the toilet and the supply line to the t-valve. I have never used Teflon and never failed on me.
Haha, yeah I just had to reinstal twice after the original instal. First a leak at the T Junction and then at the toilet port. Not a drop after the third attempt though. Just make sure you apply quality tape and some waterproof lube to all joints that leak.
It’s easy to install, and most of it will work with just strong hand, however in my case, and I’m sure that many will face this is that the inlet attached to the wall or ground from where the main water supply comes was not touched from many years. When I went to tighten it to install the bidget, and later had to open it, there was a leak from that. So I had to immediately go to Home Depot and get a replacement which is only $10 but the problem with that is now you need a wrench and you need to shut off the guitar home’s water supply to fix it.
Great video, thank you! A question, my toilet tank does not have the water hose attached at the bottom of the tank, like the most common ones. Instead, it goes all the way up and inside the tank. I will need to attach the spray hose to the other end (the one that comes out of the floor on your video, out of the wall in my case). Do you know if I can get a diverter or something that would allow me to do that?
If you turn the main valve which is near your supply line it will stop the water to both bidet and the tank but if you switch off the valve on the splitter the tank will still fill, it will only switch off the bidet. Hope that helps
@@take_two_vlogsit does help. just to clarify. if the T valve is switched open, the toilet tank still fills with water and you can still use the flush?
Is the t-valve one size fits all or are there different ones for different toilets? I want to get a bidet online but I’m worried if it’ll fit my toilet or not
Yes for the houses built after the 1970's the toilet supply lines are standard, with a 3/8th inch compression at one end and 7/8th inch ballcock nut at the end which will thread into the T-valve and then the other end of the T-valve in your toilet. The bidet hose will connect to the other opening of the T-valve.
No this one is only for cold water. If you would like hot water too, you will have to have a receptacle near the toilet as those bidets do need a power source.
There is no difference, same company. One has a button which you need to push to get the water and then push it from the other side to stop and the other model has a lever which needs to be kept pushed in order to get the water.
The sprayer holder hook can be wall mounted or can be clipped to the toilet tank. If yours broke contact the customer support and the manufacturer will send you a replacement.
Do you leave the valve on, in the directions mine says to turn it off every time but that's a headache having to reach behind the toilet every time to turn it on
We have been using Brondell CleanSpa Hand Held Bidet for over 4 years now and working perfectly fine. There are cheap ones also available on Amazon but not sure how long do they last. www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Yes you can install at a rental property and in offices but please make sure you are informing the building property management in advance and taking permission (if required) as per building rules.
The V-valve is same for all the bidets. The one we use is www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746?eid=PS_GOOGLE_D00_Corporate_GGL_Shopping_PLA_All-Products_All%20Products__PRODUCT_GROUP_pla-297623692777&gad_source=1&gclid=CjwKCAiArfauBhApEiwAeoB7qNxo82oaFwdcLc44HDrJsN5GpkCn8E0GVB2usAp121JrwtG1A1DW0RoCLY4QAvD_BwE&gclsrc=aw.ds
The controller needs to be outside though so you would need to untighten it and turn around so that it' can be easily accessible. Currently it's on the right side underneath the tank
I installed these in three bathrooms but water in flush tank keeps running. Though it doesn’t go in flush. After each use have to close the base valve. Also it doubled my water bill. Now going to remove these.
Please remove the tank and check your fill valve. Maybe the float turned towards the back of the tank and its not lifting with the water and the water is running through the overflow pipe into your toilet bowl.
on google it says that it's illegal to install a bidet on you ow. Also there are safety hazards like the dirty water contaminating the drinking water. Does anyone know anything about this? have you guys faced any issues? will i get in trouble if i install a bidet on my own
There is no such rule. You can install a bidet on your own as long as you are comfortable with plumbing. Drinking water has all together a different faucet which is next to your kitchen sink so there is no chance of cross contamination.
Very easy to follow. But by looking at the toilet seat, I can't understand what measurement of hose we would need. Some of them are selling 7/8 and others are 1/2.
3/8th inch compression to 7/8th inch ballcock nut supply is the standard for toilet supply lines. You can use your existing toilet supply lines. For the bidet its just an additional T-valve which has to be installed. So your 7/8th inch nut will go into the T-valve and then the other end will screw on to your toilet fill valve which is coming out from the tank.
That's a T-valve adapter. Maybe it was missing from the box. Buy it from Home depot www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Some bidets have a small strainer washer, check if yours have. If not would advise to buy a good quality to Bidet. www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746?eid=PS_GOOGLE_D00_Corporate_GGL_Shopping_PLA_All-Products_All+Products__PRODUCT_GROUP_pla-297623692777&gad_source=1&gclid=CjwKCAiArfauBhApEiwAeoB7qNxo82oaFwdcLc44HDrJsN5GpkCn8E0GVB2usAp121JrwtG1A1DW0RoCLY4QAvD_BwE&gclsrc=aw.ds
Yes the water will be cold. There are bidets available which have a hot water option as well but for that you would either need a hot water inlet supply near your toilet or a receptacle to power your bidet.
You can find this bidet in Home Depot but other types are also available on Amazon. www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746?rrec=true
Sorry what do you mean by an automatic bidet? There is no bidet in the market as of now, that will sense that someone is sitting and start spraying automatically. I guess you are referring to seat bidet in which you have to turn the knob and adjust your bum for the sprayer to clean
Yes a shower hose should work. Never tried it but the adapters look the same. Check the below link. www.homedepot.ca/product/craftx-72-inch-polished-chrome-handshower-hose/1001800941
Just installed it but when I turn on main water there’s random leakage, especially from the top of the original tube in the toilet. What do I do? It’s impossible to reach into that little crevice. Do I just dissemble and put on plumbers tape? I’ve tightened all of them as much as possible
@@devthapa1717 yes just make sure every single little component is tightened to the maximum, in my case it was a pre-existing plastic part on the tube that I had to tighten manually
I did. However, there was a leak from toilet connector. It was leaking with high pressure. Probably the connector was old and washer. Changed the toilet tank connector. Working perfectly now. Thank you 😊
Yes only cold water. If you want hot, there is different type of bidets available, either you have to have a plug near the toilet seat or a separate hot water line near the toilet.
What a great idea! And a heck of a way to wake me up in the morning - a shot of cold water to my undercarriage! Thanks for sharing xxx
😂😂
Beats just wipping it with a tissue.
When you walk over dog dang you wash the underneath on your trainers not just wipe it
So why the hell don't you wash your ass
Wash your self! Not just wipe
Dutty yute!
Thank you. I feel confident I can do this. My problem is in my one bathroom it is very tight so I will have to work a little harder but at least I know what to do.
Spray first WD-40 and wait for 5mins then you can unscrew it.
Thanks guys I done it👍really helpful video 👊 love from 🇬🇧
Exactly what I needed to know....thank you both very much (from Australia).
Glad to help out!
Just installed mine! I'm new in Canada with a new home and I like your DIY channel. Subscribing!
Are u with a kid. mine is 4 yesrs do u have info about school
Great clip mate thanks my project in the morning😢
Good luck!
where did you buy the bidet from ? if online , can i have he link please
Bought it from Home Depot - www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Thanks..you made it look so simple and easy to install
Glad it helped
Very helpful video, thank you!
Thank you ser,now I know how to install already
Thank You Bidde 😂
Very Useful Video ❤
Thank you for sharing.
Thank you so much love from Canada ❤
What about the water being cold? How to make sure we have warm water? Because I can’t imagine how difficult will it be during winter season
Yes the water is cold, there are bidets which comes with hot water option as well but you would either need a receptacle close to the toilet or should have a hot water inlet to the toilet.
@take_two_vlogs
Hi! I've got the exact same model as the one you're demonstrating. I've had one problem though. The pressure drops if you keep it running for more than a few seconds. Any suggestions?
@@take_two_vlogs
Hi! I've got the exact same model as the one you're demonstrating. I've had one problem though. The pressure drops if you keep it running for more than a few seconds. Any suggestions?
@@take_two_vlogs When you were unboxing, the bidet handle looked different from the one in the video. After the installation, are you showing two different styles of the bidet head? In the unboxing video, there is a button-style head, but afterward, you show a different style without a button-just a handheld water sprayer. I am confused.
@@take_two_vlogswhat is receptacle and hot water inlet ??
Great information!!
Thank you so much for making the western toilet half as hygienic
Just make India hygienic, problem solved
Thanks for the nice and detailed tutorial. i will give a try if i get option to install bidet.
Hey, thank you so much for this detailed video! Question: what is the size of the wrench you used?
Its an adjustable crescent wrench. You can find it in any hardware store
You make it look so easy. I cannot get mine installed without leakage 😢
You have to put teflon
You have to make sure your toilet supply lines and t-valve have washers in it (sometimes the washers of the supply line are worn out and for the t-valve they are provided separately in the packaging which you have to insert). The threads have to match exactly when tightening the t-valve to the toilet and the supply line to the t-valve. I have never used Teflon and never failed on me.
Did you just hand tight the Metallic nut of the T-valve?
Great instructions! Thank you!
Haha, yeah I just had to reinstal twice after the original instal. First a leak at the T Junction and then at the toilet port. Not a drop after the third attempt though. Just make sure you apply quality tape and some waterproof lube to all joints that leak.
It’s easy to install, and most of it will work with just strong hand, however in my case, and I’m sure that many will face this is that the inlet attached to the wall or ground from where the main water supply comes was not touched from many years. When I went to tighten it to install the bidget, and later had to open it, there was a leak from that. So I had to immediately go to Home Depot and get a replacement which is only $10 but the problem with that is now you need a wrench and you need to shut off the guitar home’s water supply to fix it.
Thank you, I think I can do this!
You guys are life savers 🙏🏼
Thank you so much, you was a hero😂
Great video! Do we need any accessories other than the washer to stop leakage?
No other accessories needed, just make sure you thread the adapter and the hose properly.
Easy. Thanks.
Thanks for sharing
This was a really good DIY
If I could recommend the wall mount do not use the plastic hanger, it snaps easily
Just drill it into the wall
That is one of the reasons we do not wall mount, we hang it in the toilet tank with the mount provided.
Great video, thank you! A question, my toilet tank does not have the water hose attached at the bottom of the tank, like the most common ones. Instead, it goes all the way up and inside the tank. I will need to attach the spray hose to the other end (the one that comes out of the floor on your video, out of the wall in my case). Do you know if I can get a diverter or something that would allow me to do that?
Hi, you can connect with us on Instagram and I can help you out
when you turn the valve, does it stop the water going into the tank and only through the bidet pipe?
If you turn the main valve which is near your supply line it will stop the water to both bidet and the tank but if you switch off the valve on the splitter the tank will still fill, it will only switch off the bidet. Hope that helps
@@take_two_vlogsit does help. just to clarify. if the T valve is switched open, the toilet tank still fills with water and you can still use the flush?
👌🏻👏🏻
Thanks a ton for sharing . 🙏🏽👍
Thank you so much....I will now be able to try it ....u made it look so simple....subscribing your channel....to learn more
Is the t-valve one size fits all or are there different ones for different toilets? I want to get a bidet online but I’m worried if it’ll fit my toilet or not
Yes for the houses built after the 1970's the toilet supply lines are standard, with a 3/8th inch compression at one end and 7/8th inch ballcock nut at the end which will thread into the T-valve and then the other end of the T-valve in your toilet. The bidet hose will connect to the other opening of the T-valve.
I didn't get a t-valve with my hose😮
Can it be used in Winter ? Does it support hot water ?
No this one is only for cold water. If you would like hot water too, you will have to have a receptacle near the toilet as those bidets do need a power source.
Could you suggest some online shops from where to order the exect bidet & converter?
We got ours Costco but the same exact is also available in Home Depot www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Thank you so much. 👍👍👍
Welcome 😊
Brilliant
thanks so much....
Does this have a backflow installed?
Can you tell me sis from where i can order this handheld sprayer. Please suggest
www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
The one you opened is clean spa and installed one did not have button on bidet. Any difference ? Yeah looks easy can be DIY with your video help.
There is no difference, same company. One has a button which you need to push to get the water and then push it from the other side to stop and the other model has a lever which needs to be kept pushed in order to get the water.
Any inputs on how to fix sprayer holder hook...mine broken and hand held sprayer is falling off hook
The sprayer holder hook can be wall mounted or can be clipped to the toilet tank. If yours broke contact the customer support and the manufacturer will send you a replacement.
Thank you ❤❤❤❤❤
Hi. What size is the T valve? I want to know the thread size. Whether its 7/8? Or can you share a link of the bidet that you purchased?
www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Do you leave the valve on, in the directions mine says to turn it off every time but that's a headache having to reach behind the toilet every time to turn it on
Yes we leave our valve on, unless we are out for a couple of weeks.
Thanks!
Very easy and well explained with demo thank you 😊
Thank for sharing video
That is great job 👍🏻What is the name of bidet brand that you have installed? Did you purchased it online?
We have been using Brondell CleanSpa Hand Held Bidet for over 4 years now and working perfectly fine. There are cheap ones also available on Amazon but not sure how long do they last.
www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Lovely
Thank you
And how do you use it in the winter with icy cold water? LOL
Can I install this bidet sprayer on a toilet with concealed cistern?
Yes you can but it will be a bit difficult, as everything is located at the back.
Hose to clean the boond 👍 no lotta needed 🎉
Thanks you Bhaiya ji, love from California.
Thank you
Dear can we install it at any Rental Property? Or offices? Please acknowledge and reply...
Yes you can install at a rental property and in offices but please make sure you are informing the building property management in advance and taking permission (if required) as per building rules.
Thanks.
CAn u suggest the specs for the bidet plz...its difficult to find the right size of the t valve...
The V-valve is same for all the bidets. The one we use is www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746?eid=PS_GOOGLE_D00_Corporate_GGL_Shopping_PLA_All-Products_All%20Products__PRODUCT_GROUP_pla-297623692777&gad_source=1&gclid=CjwKCAiArfauBhApEiwAeoB7qNxo82oaFwdcLc44HDrJsN5GpkCn8E0GVB2usAp121JrwtG1A1DW0RoCLY4QAvD_BwE&gclsrc=aw.ds
V nice video bro
Thanks
Thank you so much
The controller needs to be outside though so you would need to untighten it and turn around so that it' can be easily accessible. Currently it's on the right side underneath the tank
If the controller is on the outside it will put additional pressure on the hose as it will be bent and may cause a leak.
@@take_two_vlogs Naaa, just letting you know man. Nothing will happen if you turn around:)
Is hot waters comes by doing this
No not for this model. There are other models that have that option but need to have a receptacle close to the toilet.
I installed these in three bathrooms but water in flush tank keeps running. Though it doesn’t go in flush. After each use have to close the base valve. Also it doubled my water bill. Now going to remove these.
Please remove the tank and check your fill valve. Maybe the float turned towards the back of the tank and its not lifting with the water and the water is running through the overflow pipe into your toilet bowl.
i stay in ireland an it completely different than the canada one so could please me
on google it says that it's illegal to install a bidet on you ow. Also there are safety hazards like the dirty water contaminating the drinking water. Does anyone know anything about this? have you guys faced any issues? will i get in trouble if i install a bidet on my own
There is no such rule. You can install a bidet on your own as long as you are comfortable with plumbing. Drinking water has all together a different faucet which is next to your kitchen sink so there is no chance of cross contamination.
Can you install it in new zealand?? 😲 would plumber install it ?
I guess it can be installed, not sure what size pipes are there, check with your local plumbers or handyman
Very easy to follow. But by looking at the toilet seat, I can't understand what measurement of hose we would need. Some of them are selling 7/8 and others are 1/2.
I mean I can't understand the connection size.
3/8th inch compression to 7/8th inch ballcock nut supply is the standard for toilet supply lines. You can use your existing toilet supply lines. For the bidet its just an additional T-valve which has to be installed. So your 7/8th inch nut will go into the T-valve and then the other end will screw on to your toilet fill valve which is coming out from the tank.
didnt mention the loosening here is clockwise and not couner clokwise ..very inmportant
Common sense dumbass
Sir you look like Indian. Is your origin
From. India
I’ve over tightened it, what do I do!???
Trey loosening it a bit, you should never overtighten plumbing parts.
I didnt get the part that connects each hose to the underside😮
That's a T-valve adapter. Maybe it was missing from the box. Buy it from Home depot www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
There is a large white tube and I think the t valve doesn’t fit at the back 😂
My mine stopped working after just few months of using. When I open the head, there is water flow, not seeing obstruction. Any advice plz.
Some bidets have a small strainer washer, check if yours have. If not would advise to buy a good quality to Bidet. www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746?eid=PS_GOOGLE_D00_Corporate_GGL_Shopping_PLA_All-Products_All+Products__PRODUCT_GROUP_pla-297623692777&gad_source=1&gclid=CjwKCAiArfauBhApEiwAeoB7qNxo82oaFwdcLc44HDrJsN5GpkCn8E0GVB2usAp121JrwtG1A1DW0RoCLY4QAvD_BwE&gclsrc=aw.ds
Is the water cold?
Yes the water will be cold. There are bidets available which have a hot water option as well but for that you would either need a hot water inlet supply near your toilet or a receptacle to power your bidet.
Where did you buy this jet spray
Ali expres
We bought it from Home Depot.
www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
In winter time; will it spray only cold water? OR mixed water?
@@JayTheDodo Where should I find that other kind of Bidet? Home Depot?
It would be cold water.
You can find this bidet in Home Depot but other types are also available on Amazon. www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746?rrec=true
I don’t understand, water will be cold???
Yes the water is cold.
Install automatic Bidet, it is more hygenic and easy.
Sorry what do you mean by an automatic bidet? There is no bidet in the market as of now, that will sense that someone is sitting and start spraying automatically. I guess you are referring to seat bidet in which you have to turn the knob and adjust your bum for the sprayer to clean
He is doing professional Canadian plumbers out of work.
Plumbers in Canada are too expensive and this is an easy DIY which doesn't require a plumber.
it would be nice if you post the link of the spray if its available online.
www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
@@take_two_vlogsagar Pani floor pr gir jyn zda toh phr kya krte Hain?
It’s not as easy actually , how do you deal with the hammering sound due to water pressure
If you are experiencing hammering issues advise to get a whole home arrestor installed by a licensed plumber.
Super
Thanks
What happens if you need a longer hose? Where do you find those is it a simple shower hose?
Yes a shower hose should work. Never tried it but the adapters look the same. Check the below link.
www.homedepot.ca/product/craftx-72-inch-polished-chrome-handshower-hose/1001800941
Arrey Bhai
This is a handshower 😅
How much shower price in Canada
This bidet costs around CAD 100 in Canada.
www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Just installed it but when I turn on main water there’s random leakage, especially from the top of the original tube in the toilet. What do I do? It’s impossible to reach into that little crevice. Do I just dissemble and put on plumbers tape? I’ve tightened all of them as much as possible
Disassemble *
Did you figure out solution? Mine has same isuue
@@devthapa1717 yes just make sure every single little component is tightened to the maximum, in my case it was a pre-existing plastic part on the tube that I had to tighten manually
I did. However, there was a leak from toilet connector. It was leaking with high pressure. Probably the connector was old and washer. Changed the toilet tank connector. Working perfectly now. Thank you 😊
I have the same issue. It’s brand new commode we brought. Can’t use the wrench since it is not accessible.
The water from the bidet will be cold..right?
Yes it will be regular water.
its healthy for the private part, u get good blood flow going
But only cold water ???
Yes only cold water. If you want hot, there is different type of bidets available, either you have to have a plug near the toilet seat or a separate hot water line near the toilet.
Pipe link
www.homedepot.ca/product/brondell-cleanspa-luxury-hand-held-bidet/1001157746
Comes
What happened to your hair?
Hey guys does anyone know just how to shorten the hose.
There is no option of shortening the hose, as it has adapters fitted at both the ends. What's the harm of having a long hose?
Thank you 🙏🏼
Thank you!