ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2024
- In this video, we will show how to install a handheld bidet sprayer to the toilet with hot and cold water using a thermostatic mixing valve. Just need a nearby vanity or sink for the water source for the bidet. Now you can set the water temperature of your liking and enjoy the Bidet sprayer usage even during the harsh winter where the water gets too cold. A cleaner alternative to toilet paper. Also, the handheld sprayer is perfect for use in the sink as well as a diaper sprayer.
Watch the entire video to completely understand the setup and all the steps.
Please like, subscribe, and provide your feedback in the comments below!
This will help us create more DIY content for you!
Support our channel:
bit.ly/3gA4Rp5
** Related Videos **
◆ Faucet Bidet Sprayer ➔ • Smarterfresh Bidet Spr...
◆ Simple Bidet Sprayer Installation to a toilet ➔ • How to install a Handh...
◆ Comparison of Bidet Sprayer Hoses ➔ • Burst Proof Shower and...
** Products Links - USA (See below for Canada and UK links) **
◆ Thermostatic Valve ➔ amzn.to/32SOh0J
◆ Midline 3/8" Compression Straight valve ➔ amzn.to/3qXhEqv
◆ 3/8" T-Adaptor ➔ amzn.to/3JYtucW
◆ 3/8" Braided Supply Line ➔ amzn.to/3HIhrP2
◆ 1/2" to 3/8" Connector ➔ amzn.to/32PWjHQ
◆ Grohe Relexaflex Non-Metallic Shower Hose ➔ amzn.to/3r1wFrI
◆ Grohe Rotaflex Non-Metallic Shower Hose ➔ amzn.to/3eYcllh
◆ Bidet Sprayer ➔ amzn.to/3F4aiGV
** Products Links - Canada **
◆ Thermostatic Valve ➔ amzn.to/3xpGPFb
◆ 3/8" Compression Straight valve ➔ amzn.to/3xpGPFb
◆ 3/8" T-Adaptor ➔ amzn.to/3xqjumI
◆ 3/8" Braided Supply Line ➔ amzn.to/3oSssqp
◆ 1/2" to 3/8" Connector ➔ amzn.to/3CV0C0c
◆ Grohe Relexaflex Non-Metallic Shower Hose ➔ amzn.to/3CW7MRV
◆ Grohe Rotaflex Non-Metallic Shower Hose ➔ amzn.to/2ZrNXUV
◆ Bidet Sprayer ➔ amzn.to/3HTxLx7
* Products Links - UK*
◆ Thermostatic Valve ➔ amzn.to/3HlApdY
◆ 3/8" Compression Straight valve ➔ amzn.to/3eEAJbv
◆ 3/8" T-Adaptor ➔ amzn.to/3pHaNlC
◆ 3/8" Braided Supply Line ➔ amzn.to/3sKO5eo
◆ 1/2" to 3/8" Connector ➔ amzn.to/3qEdL9S
◆ Grohe Relexaflex Non-Metallic Shower Hose ➔ amzn.to/3eykRr0
◆ Grohe Rotaflex Non-Metallic Shower Hose ➔ amzn.to/3JwnHer
◆ Bidet Sprayer ➔ amzn.to/3zjNwK0
Some of the links may be affiliates that support the channel.
#Hot&Cold #BidetSpray #HandheldSprayer - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] แบดมินตันหญิง "เมย์ รัชนก" ไทย vs เบลเยี่ยม รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/qfMROCoiKMY/mqdefault.jpg)
I logged into Google just so I could give this video a thumbs up. It was a perfect demonstration of how to allow both hot and cold water to flow to a bidet attachment. Extremely well done!
Glad it was helpful! I appreciate the feedback.
Most bidet attach to the cold toilet water. The hot and cold sink water just makes more sense. I haven't seen a complete kit for your set up. I will buy the parts separately. Your design is well thought out and explained, which is great because no one wants a leaky bidet. Thanks 👍
This is the best video on hot/cold shattaf installation. Explanation was clear and liked the way you laid it all out on the table before installation. Thanks also for vanity install and pedestal sink install!
Thank you for the valuable feedback. Please do share the video so others can learn and benefit from it. Don't forget to subscribe to our channel for updates on the future videos :)
Stay safe and healthy!
@@HandyBros We got this installed, wish I knew how to post a photo of it. Not as elegant as yours but it works.
I am glad you were able to install it :)
please do give us a thumbs up and share video with others. Thanks
You are very good at explaining this. Thank you for being so clear and direct.
Exactly what I was looking to do . Made life easier. Great job
I bought all the parts and fitted this in the UK. Works great(one part needs to be updated in the links section though)
Thank you for your most helpful and informative explaination. I was told it could not be done. Now I know it will be done.
Glad it helped!
Thank you so much for your clear and step by step instructions.
Glad this was helpful.
Nice video... Principles explained really clearly... Although my Mrs didn't want to see any of the connecting pipes and mixer setup!
Great, Thank you so much for this video !!
Glad it was helpful!
Not only an excellent video, but also a great job at replying to every comment!!! You probably score a 100 % for the replies, and that is perhaps a first on TH-cam!!! Keep it up guys!!!!!
Thanks so much!
EXCELLENT VIDEO. THANK YOU VERY MUCH
Super , just what i was looking for
Thank you so much for this video! I was told on the hardware store that this was impossible to do. Now I know what I need to purchase!
nothing is impossible. there is a solution for everything. Just need to look deeper :)
Good luck with the installation!
Hope you show them the video, they may not know of this solution.
Very useful video HandyBros. Thanks
Glad it was helpful!
Thanks so much for this!!!
You are welcome. Please do check our other video on bidet sprayer specially the burst proof hose for the bidet.
excellent video!
Excellent explained video thank you for such a great video
Glad it was helpful!
Awesome! Thank u :)
Thank you for the feedback! I am glad that I was able to help.
Very helpful!
Glad it was helpful!
Excellent, great video
Thanks for the feedback. Do check our other related videos on our channel!
Excellent video. Well done 👏
Thank you!! Stay tuned for more exciting content!
Thanks for sharing 👍
Thanks for watching
Hi Hassan, you have mentioned to buy two Grohe Relexaflex Non-Metallic Shower Hoses, is there a reason to buy two of them or 1 would work?
my water faucet or bath is not near the toilet seat so what do you recommend? or can u make a video how to get hot water supply when seat is away from jot water supply??
Very good demonstration. But I’m not sure if you purchased all the packages separately. Because I couldn’t find those products on line
Easy to install, th-cam.com/users/postUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.
Plumer wants to charge me 250pounds... 250 pounds saved..amazing video dude.
I am glad I was able to help. Send me half of what u saved 😜 ... kiddin
on the nozzle the lever to let the water flow is so close to the water spray, I'd be concerned soiled water would drip back onto my hands. Are there nozzles that have the lever farther back on the nozzle so dripping from the body won't fall on your fingers?
Your videos are so clear!! Thank you. Since supply lines are designed to be under continuous pressure, could I use a longer supply line instead of the Grohe? For some reason, the Grohe reminds me of a garden hose - lol. Thanks again!!
Thank you for the feedback. Yes, you can use a longer supply lines as they are meant to operate under continuous pressure. Not sure if this would be able to stay on the bidet sprayer holder.
@@HandyBros I decided to buy the hose and try the exact same setup as yours, same mixer, same valve, but no one has the connector to expand the 3/8" male to 1/2" female. Would either of these work, please? TIA
www.amazon.com/gp/product/B005L90NA2/ref=ox_sc_act_title_3?smid=A2JRO0HAN6T7EI&psc=1
www.amazon.com/gp/product/B08FL9FJMR/ref=ox_sc_act_title_1?smid=A3C84HZWTTKSOR&psc=1
not sure. I'll look into that.
Here is the link to the 3/8 to 1/2 adapter/ bushing: amzn.to/37FNyj3
Amszing
Thank you for the feedback! I am glad that I was able to help.
Do u know how do I connect sprayer with my existing bidet toilet seat
Handy bro, can you buy all these supplies in Canada?
Nice idea, but won't this mixup the hot and cold water lines of the entire house?
❤
Thank you for the video. I do not have a vanity in with the commode. Can this work if i connect directly to the water source to the flush tank???
That would be a simple installation and I do do have the video for that as well if you look that up on my channel page. However, for a hot water supply, you need to tap into a hot water source.
Great Video. Can you update the link for the SharkBite 3/8'' Compression Straight Valve. The current one takes me to the Thermostatic Valve.
Thanks for bringing this to our attention. We have updated the link.
www.lowes.com/pd/SharkBite-Brass-3-8-in-Od-Female-Compression-x-3-8-in-Od-Compression-Quarter-Turn/1001851804
I have a hot and cold water bidet but its only connected to the cold water. I would have preferred it to be hot and cold. My issue is that the sprayer only works in short burst. I press it down water comes shooting out then immediately stops. Then i wait 2 seconds for the line to automatically fill up. Does anyone know what has gone wrong?
do you have to do all this, if you are installing a new separate line especially for the bidet ?
for just the cold water - no. But if you need warm water, you would need a separate hot water lien as well plus the thermostatic water mixing valve.
This was amazing, you made it super easy to understand and follow. Just one request if you can provide a link to the 3/8 to 1/2inch conversion adapter used to connect the bidet hose to the stop valve
Thank you so much for the feedback.
Here is the link to the 3/8 to 1/2 adapter/ bushing: amzn.to/37FNyj3
@@HandyBros thanks, so I got this, but it was too loose on valve, despite putting on plumbing tape. Any suggestions?
@@HandyBros FYI, the Home Depot bushing is too big because the threading is different. I brought the parts to the store with me to test out.
did you try the bushing that comes with toilet supply line the link I provided above?
I can’t find 3/8 to 1/2 in adapter or bushing. I found this instead at Home Depot... Will it wok?
1/2 in. Compression Inlet x 3/8 in. Compression Outlet Brass Multi-Turn Straight Valve
www.homedepot.com/p/202047042
Hi HandyBros, this video is very helpful for me. I want to install hand held bidet sprayer with hot & cold water for my parent restroom. Both they need to use daily. Do you have installation service in Camarillo, California? or can you introduce me a plumber can do it? Thank you so much. Mindy
Hi Mindy, thank you so much for reaching out. My suggestion would be to get all the parts and get a handyman to install it for you. Just show the guy the video so he knows what to do. This is a pretty easy and straight forward installation that any handyman can help you with. Good luck!
Where did you get the 3/8 male conversation adapter to 1/2 male ?
Here is the link to the 3/8 to 1/2 adapter/ bushing: amzn.to/37FNyj3
Hi yours video is very helpful I would like you to show us how to connect the bidet sprayer under the sink only to 🔥hot water
this should be fairly straight forward. Just skip the thermostatic mixer valve and have the bidet sprayer hose connect directly to the cold water line via tee adapter.
The tee adapter doesn’t work with the hose under my sink. It’s bigger than 3/8”. How can I figure out if I need a 7/8”x7/8”x3/8” tee or 5/8”x5/8”x3/8”?
Look at the supply lines if they have any mention of the size. If not, try a few different sizes of the tee to figure out which one fits. If you have Vernier caliper, you can measure the size as well.
sharkbite compression straight valve link directing to different product can u pl update the link
Thanks for bringing this to our attention. We have updated the link.
www.lowes.com/pd/SharkBite-Brass-3-8-in-Od-Female-Compression-x-3-8-in-Od-Compression-Quarter-Turn/1001851804
The last part 3/8" straight valve link wont work can you send me a link
Thanks for bringing this to our attention. We have updated the link.
www.lowes.com/pd/SharkBite-Brass-3-8-in-Od-Female-Compression-x-3-8-in-Od-Compression-Quarter-Turn/1001851804
Hi, do you still have the list available? I can’t find it on amazon. Thanks
Please check the description of the video. The product links and related videos are in there along with other useful info.
Hi..i am living in Germany do you have any link?
There’s a thermostatic valve available on eBay that can go with this for a warmer spray
Thank you for the feedback. I can definitely imagine other alternate products available out in the market. Just make sure the valve comes with a backflow preventer otherwise your hot water will flow through your cold water lines once a valve or faucet is turned on else where. The thermostatic valve we used had a built in back flow preventer.
@@HandyBros great tip thanks
Hey Bro I bought the ebay thermo valve with non-return, all is ok but one problem is the big bang noise going outside the house once i use the bidet, looks like air pressure going out or to the combi boiler, any advise would help
Nice explanation...but I don't want to see all those hoses running from my vanity to my toilet bidet attachment.
Good video, all the bidet sprayers I see on YT don't talk about or mention the tempature of the water, which is quite vague....
That is true. There is no kit available currently that can do a warm water setup. We are working on another type where the bidet gets connected with the sink faucet spout. Stay tuned. Thnx
@@HandyBros Okay thank you, Are you based in the UK?
Also all of the bidet sprayer set ups I've seen on YT are connected through one of the pipe hose which connects to the wall, but those videos are in American households and the UK toilet households are not designed like that.
we are in USA. may be you can get a sense from this video and find components that fits with UK standards.
How can I do this if the bidet is connected to the water from the toilet? Since there’s only one entry ( cold water)
you need to find a nearest hot water source. That's the only way this setup would work.
Hi HandyBros, Could you please give me the total list of the items that I need for installation from the sink to toilet. I am in Canada so please give me the places name where I can find all these items. Thanks,
Hi Mohammad - the list of products along with the link are in the description. You should be able to find all of the items either on amazon, Lowes or HD. Let me know if you need any other help. Thanks
Hi bro the Bidet hose got busted from the edge and flooded the upstairs bathroom leaked water from ceiling more damage done
not able to attch picture on this forum or i should have shown you
I really sorry to hear that you had this issue. Did you use the hose that came with your bidet set? I don't recommend using the one that comes with the bidet set since it is not meant to work under continuous pressure. I have a link to the Grohe hose in the description which is a lot stronger. I even have a video in the description showing the inside of these hoses and recommendation.
Hope this help for you and other users of the Bidet.
hi i am not able to find the 3/8 to 1/2 adapter anywhere do uhaveany part no
Here is the link to the 3/8 to 1/2 adapter/ bushing: amzn.to/37FNyj3
Thanks for reply
What is the brand and model of this bidet sprayer? Can someone please give the Amazon link to orderer it? Thank you.
Please see the links of the products in the description of the video. Thanks
how much do you charge to install all of it
If you understand the video right, and have all the parts, this type of installation should not take anyone more than half hour. Check with your local handyman if you need help and show him the video. Good luck :)
U
how do we reach u
Hi,
you will find our email on the channel "About" page. Thanks
I can’t get the SS Faucet supply line
Item -# 815742
Model # 7223-20-38-6
I am in Toronto Canada
I got all the parts except the 3/8” compression 20” SS hose female fittings at both ends
Thanks
Thank you for the feedback. Here is the amazon link to 3/8" braided supply line: amzn.to/2WnWC5B
Let me know if I can be of any help. Thanks
Accordion pipe… not much else I need to see here..
😢 will not work. You are creating a flow loop from hot to cold that is always manual (mix)ing valve without a flow controll valve hence water is ALWAYS mixing
That looks very messy.
Why would anyone want that many flexi hose behind their toilet and sink it looks messy 🙁