How I Make Molds for Resin Casting | Silicone Rubber Mold
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- I hope this tutorial is helpful, let me know if you have any questions in the comments below.
Supplies used to make mold:
Smooth-on OOMOO 30 Silicone Rubber: amzn.to/39IoqG0
Hot Glue Gun: amzn.to/3bOHLqv
Chip Board: amzn.to/2UYcoTQ
Stir Sticks: amzn.to/2wYU9FC
Measuring Cup: amzn.to/2UZC4iP
Check out my other social media.
FACEBOOK: Hannah-Stayt...
INSTAGRAM: / hannah_stayton_art - บันเทิง
![🎮เกมยิงปืนใหม่ ภาพสวย และ สมจริงที่สุดในโลก [ BODYCAM ]](http://i.ytimg.com/vi/My3l1owRY9I/mqdefault.jpg)
Great idea with the the previous snaps 👍👍👍👍👍
thank you your video cleared every thing for me. none of the rest of them didn't help me. but you did so thank you
Just a great mold. I know this is 1 year old but I have friend who work with silicone mold product. They told me for types of castings I do this tip will help silicone molds last longer. Do not use soap and water to wash molds unless absolutely necessary. Use tape to clean mold also I buy a mold release that has a moisturizer in it and after cleaning mold with tape to remove stray glitter and resin pieces (like drips) spray your mold with mold release and let dry. After mold release is dry put mold in plastic bag loosely. Cleaning and adding mold release helps condition the silicone. Using bag helps them from dust but mainly to help them not dry out. If you need brand name of release I use just message me. I got it from Amazon. I hope this helps you or someone who reads this comment. Happy crafting and most of all enjoy it. hugs Sheryl 💙🎨💙
Instead of baking in the oven, but you could set the “uncured” mold in the trunk of your car. After the time is up roll down the windows for a long time. It is not ‘cheap’ it is called frugal. If you are worried about any air bubbles in the setting mold vibrate from underneath… you can use and orbital sander with no abrasive paper attached. U can use a cordless toothbrush under or if you have one, the little battery operated muscle massager available at any box store or pharmacy. Best of luck
This was awesome!!!!
Thanks you for taking the time to make this video. I have never made a mold but I want a large cross mold and no one had one the size I wanted. So after watching this video I am confident I will be able to do it. I love making resin wall art. Thanks again.
Awesome tip with the leftover scraps👏🏽👏🏽‼ thank you for sharing 💯😁‼
Love your honesty and your creativity! Beautiful mold and cluster at the end!
Omg, loved your video and sense of humor!
Love this. The finished resin looks like rock candy.
that came out fantastic.
Oh my god am in love in this
Very impressive work! I have a lot of this company's mold stuff, but haven't dived in yet. I got the dragon skin 30, and the sorta clear. Each in bucket size, since I want to mold several large things. Great tip on using your scrap as filler! I'd love to see more videos on mold making, resin, and working with clay. Thanks! New subscriber!
Thank you perfect tutorial 😁💞
Gorgeous!
Thank You so much!!!
You are very watchable. Thanks for your videos.
Beautiful ‼‼👏🏽👏🏽👏🏽❤
Wow that was beautiful
You give off Sierra burgess vibes 😍😍
Thank you this is very helpful :)
That was great, thank you. Would never have thought of using the cardboard. Love the end product!
Excellent superb Creativity
Thank you
beautiful projedt.
Love this video and how down to earth you are lol new subscriber here 🤗 thank you for sharing
For mold release i have found Vaseline or a vegetable spray works and is cheaper
Show us video
Thank you for this. I have a question, I have a big crystal, and its one of the ones that is round and the crystal surface is on the inside of the gem, the outside that you hold is the rock surface. I added silicone to it and let it set. Let me say that I did this with 3 other of the same crystals, but they are all flat lays, like the one in this video. Now, my question is how do I get it out effectively? I am having the same issue with the silicone seeping into those tiny spaces. I can't grip the sides either, bc they broke from the center when I was removing it 🥲😰. Lol any info on how to remove it will help, thank you
idea: you could dip the cheap rests into new silikone first and then put them in and then pour, not sure if that helps but would be nice to know
Beautiful! Nice to know I don't have to be so anal about the process!
What’s the best mold maker you can recommend?
Hello I would like to know how you mixing your resine and what u use for that effect color
Nice. May I ask what kind of resin you like to use?
Is this product also good for making stone/rocks?
Do you sell your moulds please I’m in love with them .? Pleeeeeeze x
Hi where did you get that large crystal?
how did you harden the resin you just set it aside? and come back next day?? ThankYou
I am just starting out. Yes, please tell me the name of products you use. Typing that out is helpful. Also, where have you found supplies cheaper?
wantabmer I have a list of all the supplies I use in the description box. I currently buy most of my products from Amazon because they seem to be the cheapest when buying a medium amount. There are probably sites that you can purchase resin supplies in bulk, but the mold maker doesn’t have a long shelf life so I wouldn’t get too much at once. You can get the measuring cups and stir sticks from most craft stores or even dollar stores but the other supplies are cheaper online. I hope this helps!
Absolutely stunning and if ppl don’t like that you don’t follow every thing your told to do in life then let them go else where, I’m just like you lol I don’t read directions very much and I still don’t own mold release also need to get some but slips mind and so far never needed, but you having lil feather babies I don’t do the baking of the molds either for same exact reason
How do you clean your molds
Or did you buy it a nd make ld
Great job but I wanted to let you and your viewers know that this oomoo 25 or 30 brand is the cheapeast worst type to use. It is called TIN CURE and has less then a year shelf life and rips and tears. If you want to make molds that will last longer and not tear. please look for PLATNIUM CURE silicone rubber. like the other kind they sell called mold star 15 slow. that is a platnium cure silicone. I was taught this by one of the main people at smooth-on. Always when using these products always stir well scraping the bottom of the jugs and mixing it back in well. the direction tell you to mix before using be sure you do that well. do not mix your sticks from A to B. use a new stick for each one and always use a 2 cup method of mixing for all silcone and all repoxy resin.
I just wanted to comment to say that I tried this silicone first when starting mold making and it was... very horrible. At no point did the stickiness EVER go away from the mold or the resin pieces casted in it. (I wanna say I was using Envirotex Lite?) I actually recommend MoldStar 15SLOW for molds instead n.n; It can be casted into right away pretty much. At least, I've never had problems. Also, I've heard more recently that it's not a great idea to scrape the container of silicone like you would resin, because uncured silicone is way more likely to cling on the sides of the cup n.n;; I hope this helps whoever reads this :D
OH and gosh, sorry, I should have mentioned, thank you for the video!! The end product is gorgeous!!
Do you make those crystals?
I would like to make crystals
.how would I do that? Have you ever made any.
How to make the mold the other way around, say I wanna make an Acrylic Stand for the object which it can be sink in but not attaching the the object to the acrylic cube ... 😅
You can use vaseline.
Hi ! BY chance do you create custom molds? I would be able to send you the actual product and pay for the services of course. I will appreciate your response
Shes so cool lmaoo who actually reads instructions
i have the same problem i cant wait and i don't read the instruction
You are adorable
Very interesting....put it in the fish tank 🤔