i plan on istalling a 100 mm tiny silencer and was planning on changing the inner barrel, what do you reccomend for a better performance considering i have 100mm extra to work with
Do these use the same inner barrels as hi-capas? I know the length us different but are the cuts in the barrel for the hop unit in the same between this and a CAPA?
@@Tactical_chicano Thanks for the info I've been wanting to put a longer barrel in my high capa and the only ones that I've found that fit the length I want are the mark 23 which I know don't fit in kappas and the AAP 01, I just wanted to make sure that those barrels were interchangeable before I spend my money only to find out that it was a waste have you by any chance tried TTI Inner barrels?
i though the inner stock barrel was 129mm long. i thought of getting the 150mm or the 220mm from crazy jet. Also, i was going to put the 70 degree super ML bucking but friends told me its too much i should use 50... whats your opinion on it plz? thanks
I t all depends what you are trying to do, if you are planning on just using it as a pistols I would just go with 131mm barrel which is made for the AAP01. No with buckings it all depends on the weight of the BB you will be using for anything bellow .25 you want to use the 60 degree bucking since its not a heavy bb. The higher the degree the stiffer the bucking will be which will help sling heavier BBs
@@Tactical_chicano thanks for your answer. Well I will be using it outside and inside has a main, with hpa, and minimum 0,28. In case of weather or more precision I’ll use 0,30 outside. I have no idea what a 220mm inner barrel can do to this gun though.
@@Tactical_chicano In my experience the stiffer the hop up rubber I have the harder it is to "sling" /lift heavy BBs. I actually prefer using softer rubbers for shooting heavier BBs.
I really don't like the maple leaf inner barrels. Never had good results with any of their parts except the hop rubbers/buckings. You can get a 130mm inner barrel in the stock aap01 which brings it up to just before the end of the threads on the outer barrel
Genuinely a very useful video. I really appreciate it. Thanks ☺️
@TheGamingJedi235 no problem
Blue threadlocker is good stuff!
dude really thank you for hop up detail also I think Install longer barrel do you suggest 6.01 290mm on Aap-01
You can just Need to make sure that the barrel isn't wobbling too much
Also you are a normal FPS will rise because of the longer inner barrel
i plan on istalling a 100 mm tiny silencer and was planning on changing the inner barrel, what do you reccomend for a better performance considering i have 100mm extra to work with
Do these use the same inner barrels as hi-capas? I know the length us different but are the cuts in the barrel for the hop unit in the same between this and a CAPA?
yes they use gbb barrels the difference is the standard lengths are different for the AAP01 so some barrels are labeled AAP01 only
@@Tactical_chicano Thanks for the info I've been wanting to put a longer barrel in my high capa and the only ones that I've found that fit the length I want are the mark 23 which I know don't fit in kappas and the AAP 01, I just wanted to make sure that those barrels were interchangeable before I spend my money only to find out that it was a waste have you by any chance tried TTI Inner barrels?
good job! !!💯💯
What’s the benefit of using the 200 inner barrel I see so many people recommending?
FPS and accuracy
Just bought the gun the stock the shimms and the springs
i though the inner stock barrel was 129mm long. i thought of getting the 150mm or the 220mm from crazy jet. Also, i was going to put the 70 degree super ML bucking but friends told me its too much i should use 50... whats your opinion on it plz? thanks
I t all depends what you are trying to do, if you are planning on just using it as a pistols I would just go with 131mm barrel which is made for the AAP01. No with buckings it all depends on the weight of the BB you will be using for anything bellow .25 you want to use the 60 degree bucking since its not a heavy bb. The higher the degree the stiffer the bucking will be which will help sling heavier BBs
@@Tactical_chicano thanks for your answer. Well I will be using it outside and inside has a main, with hpa, and minimum 0,28. In case of weather or more precision I’ll use 0,30 outside. I have no idea what a 220mm inner barrel can do to this gun though.
I can use any 130mm GBB inner barrel right?
@@Tactical_chicano In my experience the stiffer the hop up rubber I have the harder it is to "sling" /lift heavy BBs. I actually prefer using softer rubbers for shooting heavier BBs.
I really don't like the maple leaf inner barrels.
Never had good results with any of their parts except the hop rubbers/buckings.
You can get a 130mm inner barrel in the stock aap01 which brings it up to just before the end of the threads on the outer barrel
I use different barrel brands this case is what was available At the shop. but I haven't had an issue with MapleLeaf