an oily cotton ball surrounded by a hot metal wire being fed electricity with no fuse or high temp cut out sealed within a metal can. I love this so much and Ill be making these for all the noisy neighbors in my neighborhood right away.
By ur logic then, when u switch on the light at home ur making a sort of short circuit only!!😂😂😂 Short circuit happens when resistance is close to zero and so really high amt. of current flows through the circuit.
Chumban Shukla I mean you're kind of right and mostly wrong. This guy is a complete and utter pleb. LEARN HOW TO USE OHMS LAW. It's not that hard, there are calculators online. Find out the the resistance of your coil, then adjust your wattage and voltage accordingly. Don't just stick a random coil onto a 5v USB cable. You're asking for your house to be burnt down. Your coil could burn out because your wattage is too high.
Please try and show all the tools and supplies you use during your experiment in the beginning. Some of them you did but I noticed there were other items you used in the video that weren't shown in the beginning. Thanks.
Instead of cotton that was used the nichrome wire can be immersed in silicone oil which is not flammable. The fragrance oil can be put on a small container on top the oil filled contraption.
My 250mm of nichrome measured 3.3 ohms. At 5V, that might draw 1.5A. Give or take for change in resistance due to heating. Sure enough, it drew 1.3A from my bench supply when voltage limited to 5V and hit over 200 degrees. So, if it doesn't destroy your PSU, it'll destroy your home insurance.
Hey Roman, I'm a metalcrafter, I make ornamental hand forged steel art. I'm planning on incorporating a custom difuser based on this design on an even smaller scale to fit into some of my table top arrangements. I'm currently working on a 100% hand forged & fabricated Lily of the Valley plant with a diffuser in the base. I was wondering what gauge wire your nichrome wire is that you used for the amp rating of the USB cable. Too thin... too hot, too thick... not hot enough. I intend to insulate my resevoir & wire with Kaowool (3000* ceramic wool commonly used in forge liningsl) instead of normal wool, for electrical and heat resistive durability reasons. Redundancy is the key when working with custom products.... Thanks for the info if you are up to sharing and I appreciate you taking the time to make the video. Excellent creativity. +1
Remove the USB cable. If you plug it into your computer you may damage it. A computer USB port can supply only 500mA while your "gadget" is absorbing at least 1.5A. Probably also your wall USB charger will get damaged in few days. You should use a lab power supply to verify the current absorption before using a USB cable!
Well, there is no risk of fire because there isn't enough air, speaking of wich, there are no air intakes, so if you try to vape that thing you'll probably get instantaneous lung cancer because of burned cotton
I made one, similar to this. Remember that you wont be able to put lower coils in this case, due to the amp provided by the charger. In my case I've used a PSU from a pc.
Awesome videos! I subscribed to you btw :) Quick question, how hot does the bottom of the steel can get? Does it get hot enough to where you need to have like a ceramic tile underneath it? :P
I think I should make a Bakhoor Burner by using MINI electric iron for pressing clothes . By using the HEATING IRON ELEMENT/COiL which Heats the Electric IRON , By Alteration/Modification , which is a very durable long lasting . So I will make One Bakhoor burner . Electric Light / Fan Dimmer could be attached to control the Heat .
It doesn't matter, as long it's a spring with same thickness, it'll work. My biggest problem is that the cotton becomes a fire and breathing hazard once oil runs out.
Welcome to the MacGyver school of engineering ladies and gentlemen.. Next up we'll be using a muffler and a gear shift knob to create a bazooka. There's no pass or fail just IMPROVISE OR DIE!! 🤷🏽♀️😁
Fire service attended the scene : what happend to the house 🏠?? Person : I just made DIY diffuser but forgot to realise fire 🔥 hazard so house burnt 😁😂
Can I use a soda can for it? or did you use that can because of it being fire proof? i have a cutting machine but right now i dont have access. just let me know thanks. btw great video very knowledgeable.
I can use my vape wire with this with 34 ohms. :) i think it's better if i also use the charger of my old vape for the wire going to the outlet :) thanks for this video
Don't plug this into your computer or laptop kids. This will basically kill your computer/laptop and the usb brick might also die out too. This is a basically short which is not the use intended for the brick.
ok, i dont know if rhis is a dumb question, i just can figure it out. can you use just any type metal for the coil? can i use a spring i already have? what makes a low conductive metal? thanks.
Man after looking at the gauge of the wire i can tell that it isnt gonna become that much hot with the power supply you are providing it you need to increase the voltage to atleast 24v and current to 5 amps
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
an oily cotton ball surrounded by a hot metal wire being fed electricity with no fuse or high temp cut out sealed within a metal can. I love this so much and Ill be making these for all the noisy neighbors in my neighborhood right away.
I made this..but it makes 🔥
🤣 yup will need a constant supply of oil or liquid to keep from drying out and burning up that wicking. This needs constant supervision otherwise.
Hook it up to a timed circuit pcb programmable with a Pi
Or a simple Wi-Fi/Bluetooth outlet switch
What is the cotton material?
@@johnshoosmith Glass wool should be best.
Otherwise it will catch fire
It could break your phone charger, because there is too big amount of current. Also if oil run out, a wool will begin to burn
wool burn only for 2 sec n stop try it if u have at home
The charger limits the current bruh
@@proxyhx2075 chargers usually are rated for 1A or 2A, this is literally drawing the max current all the time. The charger will die really quickly
@@JamilKhan-hk1wl if you measure and use the resistance properly it will run forever
@@proxyhx2075 lol
This is the best house fire DIY I have ever seen
congrats! you've just made a giant short circuit!
Actually, nichrome wire is known as resistance wire.
By ur logic then, when u switch on the light at home ur making a sort of short circuit only!!😂😂😂 Short circuit happens when resistance is close to zero and so really high amt. of current flows through the circuit.
Chumban Shukla I mean you're kind of right and mostly wrong. This guy is a complete and utter pleb. LEARN HOW TO USE OHMS LAW. It's not that hard, there are calculators online. Find out the the resistance of your coil, then adjust your wattage and voltage accordingly. Don't just stick a random coil onto a 5v USB cable. You're asking for your house to be burnt down. Your coil could burn out because your wattage is too high.
And dont use regular wire.
See now you've brought out the philosophers. here: targeted Resistance = circuit - unintended or no resistance = short.
Please try and show all the tools and supplies you use during your experiment in the beginning. Some of them you did but I noticed there were other items you used in the video that weren't shown in the beginning. Thanks.
Instead of cotton that was used the nichrome wire can be immersed in silicone oil which is not flammable. The fragrance oil can be put on a small container on top the oil filled contraption.
the kids out there will vape the essential oil
MoNq
Me lol
Lol
Me
Lool
0:16 Now that's a clean cut right there
My 250mm of nichrome measured 3.3 ohms. At 5V, that might draw 1.5A. Give or take for change in resistance due to heating. Sure enough, it drew 1.3A from my bench supply when voltage limited to 5V and hit over 200 degrees. So, if it doesn't destroy your PSU, it'll destroy your home insurance.
could you explain please? How would it destroy, is that not a usable amount of amperage to pull consistently?
Hey Roman, I'm a metalcrafter, I make ornamental hand forged steel art. I'm planning on incorporating a custom difuser based on this design on an even smaller scale to fit into some of my table top arrangements. I'm currently working on a 100% hand forged & fabricated Lily of the Valley plant with a diffuser in the base. I was wondering what gauge wire your nichrome wire is that you used for the amp rating of the USB cable. Too thin... too hot, too thick... not hot enough. I intend to insulate my resevoir & wire with Kaowool (3000* ceramic wool commonly used in forge liningsl) instead of normal wool, for electrical and heat resistive durability reasons. Redundancy is the key when working with custom products.... Thanks for the info if you are up to sharing and I appreciate you taking the time to make the video. Excellent creativity. +1
THC Oil.
add some e liquid it creates more fog-smoke
nice. gonna hotbox my whole house
El mejor que he visto 😍😍😍
This has got explosion written all over it 💥
I learned something - Thanks Roman Bear!
great video.U should make a mist diffuser or humidifier for the hobbyists. Thanks
My Essential Oil Diffuser Work 👍👍👍
did u make it?
@@priyavarshney3619 YES
How long the oil last before refilling? Please answer I have this as my project
I DON'T know
that contraption where you used an electric hand drill to cut the can was great, could you explain that in one of your videos how to make it.
I have a suggestion if you able to generate the required frequency you can use an 1:1 transformer arrangement to create clean sinusoidal wave.
Remove the USB cable. If you plug it into your computer you may damage it. A computer USB port can supply only 500mA while your "gadget" is absorbing at least 1.5A. Probably also your wall USB charger will get damaged in few days. You should use a lab power supply to verify the current absorption before using a USB cable!
Andrea Gavioli the voltage on the usb port will drop down to guarantee a power consumption of 500 milliamps.
i have usb 3.0 with boostpower which gives me 2amps of power crazy right?
Or otherwise, a dangerous, dirt cheap vape.
Raidzor つ ◕_◕ つ why dangerous? its Output is just 12 V because its the adapter of a handy charger (sorry for bad englisch... Im german)
Because of how the coil is made and what liquid is used, you don't vape concentrated oils haha.
so i dont know much about vaping an i think u know more about it so i think youre right... by the way i prefer to smoke hookah ^^
+Dale Dale Erm... isn't that a 5v 2amp charger? 2 amps over filament that thin probably isn't very safe imo
Well, there is no risk of fire because there isn't enough air, speaking of wich, there are no air intakes, so if you try to vape that thing you'll probably get instantaneous lung cancer because of burned cotton
why does this remind me on vape
Same
Mutalisk888 you could prob put some juice in it 😂
Ik i vape and i know this...
I made one, similar to this. Remember that you wont be able to put lower coils in this case, due to the amp provided by the charger. In my case I've used a PSU from a pc.
Yeah better real vape coil and more power into it would make it work prob
once not fake but real cover image of his videos... Yey!!!!
Awesome videos! I subscribed to you btw :)
Quick question, how hot does the bottom of the steel can get? Does it get hot enough to where you need to have like a ceramic tile underneath it? :P
very cool! Can you make a usb humidifier?
Good job...👏👏👏👏👏
But not safe...
Hi yuo are helpin people to make lefe easy, go on GOD bless you.
that is sooo cool!
Your work is very very nice.
Don't ever let that run dry, lol.
perfect for chemoterapy
superb video men
I think I should make a Bakhoor Burner by using MINI electric iron for pressing clothes . By using the HEATING IRON ELEMENT/COiL which Heats the Electric IRON ,
By Alteration/Modification , which is a very durable long lasting .
So I will make One Bakhoor burner .
Electric Light / Fan Dimmer could be attached to control the Heat .
will there be any short circuit
I really love this project, but how safe is this?
could you use a spring from a pen or a lighter?
It doesn't matter, as long it's a spring with same thickness, it'll work. My biggest problem is that the cotton becomes a fire and breathing hazard once oil runs out.
Misto ,bravo man ;)
No hot glue? Progress XD
Jakub Miłosz hot glue is useful though
I think he's not an Indian, that's why. Indian people love hot glue.
Hot Glue will melt while heating
Welcome to the MacGyver school of engineering ladies and gentlemen.. Next up we'll be using a muffler and a gear shift knob to create a bazooka. There's no pass or fail just IMPROVISE OR DIE!! 🤷🏽♀️😁
145 disliker vaped the essantial oil
wow! no clickbait!
Great idea.. I was looking for something not plugged into the wall. This will do !!
Just put glyceryn instead of oil and you have a perfect mini fog machine (and btw were can i find nichrome wire?)
Dangerous 🔥🔥🔥🔥
Great work,
How many times we can used the medical cotton wool?
Thank you for sharing, I don't think the oil diffusers are really worth how much the shops charge for them
Fire service attended the scene : what happend to the house 🏠??
Person : I just made DIY diffuser but forgot to realise fire 🔥 hazard so house burnt 😁😂
vapers can relate :D
Can I use a soda can for it? or did you use that can because of it being fire proof? i have a cutting machine but right now i dont have access. just let me know thanks. btw great video very knowledgeable.
Please can you tell me the length and gauge of the nichrome wire so I can make one it looks good thanks Bob in the UK
that is the best one
I can use my vape wire with this with 34 ohms. :) i think it's better if i also use the charger of my old vape for the wire going to the outlet :) thanks for this video
Don't plug this into your computer or laptop kids. This will basically kill your computer/laptop and the usb brick might also die out too. This is a basically short which is not the use intended for the brick.
It's great video ... WOW
I'm just asking if you can show how to make a MHL to HDMI cable for samsung please ?
( It's a TV casting cable )
Can you use various oils with this or stuck using the same scent/ scent group?
cool, though precaution should be done once the water runs out..it might burn
Did you use the mobile charger for the purpose?
ok, i dont know if rhis is a dumb question, i just can figure it out. can you use just any type metal for the coil? can i use a spring i already have? what makes a low conductive metal? thanks.
a spring could also work but it may be more than 2 amp from the powersupply if you could also use a 3 ohm resitor
Spring banane ke liye kon sa wire istemaal kiya hai
Anxiety set in when you didn't say anything about depressurizing the hairspray can before you cut it open, and continued because of the music.
planing to start vaping essential oil..
Fill that thing with canna oil and then chill in the car, plug it in and hotbox without actually smoking lmao
Which wire did u use, that is heating the thing ?
hi . can you tell the resistance you used in this video please
I would use this in like a car or something of that nature and I would shorten the chord and hook up a battery bank of some sort
Hi sir which program do you use for video editing?
سلام چندساعت توی برق بمونه که نسوزه دستت درد نکنه ممنون از لطفت ممنون
is that safe oil doesn't catch fire
Can I drop this in my bath?
If you want to attempt toaster bathtub in other ways, sure
Put on pc: rip motherboard.
Is there a video about this saw/lathe?
Don't put gasoline in it lost my house burned half of my kitchen down. in a lawsuit with TH-cam as I speak.
J S hope u win
Can the same product be used as water(humidity diffuser?)
Thanks for the tutorial my friend
is nichrome wire required or it works without it?please reply
Vape mode😁
Man after looking at the gauge of the wire i can tell that it isnt gonna become that much hot with the power supply you are providing it you need to increase the voltage to atleast 24v and current to 5 amps
Could you provide the low cost parts buying link for Canada
What kind of wire did you use
How you opened the deodorant because it is on presure
Put some 2 stroke castor oil in it.😍
HOW TO MAKE AN OIL USB DIFFUSER - brought to you by Dove.
oq seria esse liquido amarelo que vc arrumou ?
hy roman what is the name of background sound!
Love this vape
How much current does it draw?
if it is 32 gauge wire around 1 amp
GENIAL MERCI
Should have incorporated a timer so you can calculate how long it takes for another refill.
any substitute for nichrome wire?
Alberto Bergés he did not mentioned it?? did he??
Work with water ?
3:06 I literally smelled my speaker to see if I can smell the oil.
Amaaaaaazzz
can the liquid be replaced with deodorizer for clothes?/liquid perfume?
Thank you bro
Other material like the nichrome wire?
+air pump /vacun pump...for make something like a e-smooke..its must be more smoke.
stop judging him, for me he is the best youtuber, BC he doesn't copy enyone, appreciate talent
could you show us how to make humidifier