This video shows how to configure NEO-6M using Arduino UNO th-cam.com/video/Ao5XRtd-RAA/w-d-xo.html If that doesn't work, try using USB to TTL converter www.amazon.com/s?k=usb+to+ttl&crid=31YN9R1KHBVO&sprefix=usb+to+ttl%2Caps%2C352&ref=nb_sb_noss_1 If that also doesn't work, you probably have a NEO-6M with no re-flashing capability. I have a NEO-M8M that I couldn't configure because of that reason :( I hope that helps.
Hello, i am using your gps-speedometer code and its working perfectly. But when i add temperature sensor to pin4 its stop working, it starts refreshing speed every 6 to 10 sec. Can you help me? Thanks!
Which LED, I have some nano boards with blinking LEDs and some don't. If you mean the GPS module's LED, they will blink when they receive a valid GPS signal.
Use U-Center application to make sure you are receiving information from your NEO-6M. The information will start coming immediately and you don't need a Satellite signal to check. This check will insure that you have a working NEO-6M.
Thanks for this. First Arduino project I've done and it works perfectly. Now I guess I'll have to start learning some code... ;-)
Glad to hear that :D
THX for this. But I'm not able to reconfigure the NEO-6M module using U-Center (Arduino Nano clone)?!? It won't let me disable the NMEA messages ....
This video shows how to configure NEO-6M using Arduino UNO th-cam.com/video/Ao5XRtd-RAA/w-d-xo.html
If that doesn't work, try using USB to TTL converter www.amazon.com/s?k=usb+to+ttl&crid=31YN9R1KHBVO&sprefix=usb+to+ttl%2Caps%2C352&ref=nb_sb_noss_1
If that also doesn't work, you probably have a NEO-6M with no re-flashing capability. I have a NEO-M8M that I couldn't configure because of that reason :(
I hope that helps.
Yep bro I too cannot reconfigure, any solution?
@@sanjuk2325 There is a way to send the configuration whenever the device restarts. I probably have to make another video for that update
Bro do a video on it as you said 🥰
@@sanjuk2325 I will try my best 🙂
I want to have GPS send my location to my family via GSM phone message whenever I travel.
Do you have tutorial to do that?
At the moment, I don't have a tutorial that does that.
The screen look abit low fps? Can you make at faster?
Making the screen faster is doable, but if you mean the 5Hz refresh rate, that is the limitation of U-Blox NEO-6M GPS module.
Nice❤
Hello, i am using your gps-speedometer code and its working perfectly.
But when i add temperature sensor to pin4 its stop working, it starts refreshing speed every 6 to 10 sec.
Can you help me?
Thanks!
If there is a way, you can share more details like pictures and diagram. We will try to find a solution.
My Led indicator not blinking, how to fix that?
Which LED, I have some nano boards with blinking LEDs and some don't.
If you mean the GPS module's LED, they will blink when they receive a valid GPS signal.
@@3DElectroTech neo 6m, I've waiting Up to 1 hour more, but still not blink. Pls helpp
Use U-Center application to make sure you are receiving information from your NEO-6M.
The information will start coming immediately and you don't need a Satellite signal to check.
This check will insure that you have a working NEO-6M.
@@3DElectroTech do u have the tutorial video? I try to use U center but the port isn't blinking(green)
- Which Arduino are you using?
- Which Ublox device?
Can we change hertz in nmea
I think changing the Rate under UBX > CFG > Rate, will change the rate for both UBX and NMEA. I haven't tried this though.
Is it ok to give 5V to module?
Yes, as every USB supports 5 Volts
What does those lines on corner describe ??
Which corner exactly?
Left top those 2 lines which are rotating...
@@sanjuk2325 The left one shows that the screen is working and the right one rotates when you are receiving updates from NEO-6M