I just first time used my whole new Moser 1400 (grey), a precise and efficient machine, very enjoyable to use. I thank you for this video, it helped me to do the things right, specially the screw tightening that is a bit surprising, because it has to keep some release.
i know im asking the wrong place but does someone know a way to get back into an Instagram account..? I was stupid forgot my password. I would love any tricks you can offer me
@Jace Garrett Thanks for your reply. I found the site thru google and im trying it out atm. Seems to take a while so I will reply here later when my account password hopefully is recovered.
I tried to clean mine and opend it. Couldnt Open these 2 big screws on top but i opened it at the handle. Now its 3x as loud except if i loosen the screw on the side but now it doesnt cut hair with that.
Hello and congratulations to you... I purchased the type 1400 and I would like to know if I can reduce the minimum cut length, which I now read is 0.7 mm. Thank you very much.
My device started not cutting well after this application, but the maintenance you did is not complicated at all and I did it easily. Could I have applied too much oil? can you help me please? Thanks for the video.
@@Asiong09 I will try to describe it simply. 0.55 pay attention here. This stage requires two people. Align the blade and make sure the blade is in the correct millimeter range (0.7-1.4mm). check again. If ready, let the other person tighten the screw slightly. this much. Remember, you will hold the relevant part of the device with both hands as if it were ready for use. The other person will tighten the bolt. this much.
Hello great video thank you. I just bought the product and the cutter blade is not exactly parallel, do you think it would be a problem, what should I do?
The inner smaller blade doesnt fit back onto that little plastic thing in the middle so when you put the big metal plate blade on top and screw it in, the smaller blade is still kind of loose and if you touch it with your fingers it moves... whats up with that
Ben trend yoldan aldım herşeyi normal alttaki karka logosu içe dağru kabarık değil başka aynen bilgileri düz bir şekilde yazılı eski model mı yoksa sahte mı diye şüpedeyim
Well, you need to make sure that oil is always available. Even if you're stuck on a lonley island you should have this oil always with you: www.moser-profiline.de/en/produktfinder/_leaf/415
i brought my moser one month back ... but the screws are very tight to open i feel still very difficult to open ..please suggest me how much width of screw driver to be used to open the scews .... i hope u will help me to sought out this problem
In Russia sold Moser 1400 (art. No 1400-0451). But I can't find it on the official website of the Moser, or in the catalogues. Tell me, please, is there the model officially?
Burgundy is 1400-0051 with two attachment combs include, and i mean 1400-0451 (gray) with one attachment comb 4-18mm. (art. 1400-0050 with one attachment comb 4.5mm - there is official web site).
This is because its a consumer version: www.moser-consumer.com/products/hair-clippers/1400-edition There are different article numbers for some regions. This is why its called 0451 in your area.
OK. Thank You. And another one question. All resource declarate "cutting length adjustment (0.7 - 3 mm)"; it is clear that the minimum length of 0.7 mm, maximum 3 mm. And what levels of length 2, 3 and 4? )) This is known? (The same applies to the length of the haircuts for some blades with adjustable length 0.7-3mm: 5 position, but what is it?)
Szia. Ha a jobb oldali gombot bekapcsolod és a hosszú kart a gép testéhez nyomod akkor az ott marad. Ekkor tudsz a gép műanyag feje nélkül picit nagyobbat vágni mint amikor simán csak fej nélkül vágsz szinte kopaszra. Ez pici átmenet hosszabb mint fej nélküli minimum de rövidebb mint a műanyag fej legrövidebb vágáshossza. Ha megértetted írj vissza. Köszönöm.
درود به موزر واقعا مدل ۱۴۰۰ موزر بهترین ماشین اصلاحی بوده که تا به حال به مدت ۱۵ سال دارم بدون مشکل ازش استفاده میکنم
I just first time used my whole new Moser 1400 (grey), a precise and efficient machine, very enjoyable to use.
I thank you for this video, it helped me to do the things right, specially the screw tightening that is a bit surprising, because it has to keep some release.
i know im asking the wrong place but does someone know a way to get back into an Instagram account..?
I was stupid forgot my password. I would love any tricks you can offer me
@Bentlee Fox instablaster :)
@Jace Garrett Thanks for your reply. I found the site thru google and im trying it out atm.
Seems to take a while so I will reply here later when my account password hopefully is recovered.
@Jace Garrett it did the trick and I finally got access to my account again. Im so happy:D
Thank you so much, you really help me out :D
@Bentlee Fox Glad I could help :)
Thanks dude. Just repaired my trimmer thanks to this video
Thank you friend. Moser is the best!!
I tried to clean mine and opend it. Couldnt Open these 2 big screws on top but i opened it at the handle.
Now its 3x as loud except if i loosen the screw on the side but now it doesnt cut hair with that.
Hello and congratulations to you... I purchased the type 1400 and I would like to know if I can reduce the minimum cut length, which I now read is 0.7 mm. Thank you very much.
My device started not cutting well after this application, but the maintenance you did is not complicated at all and I did it easily. Could I have applied too much oil? can you help me please? Thanks for the video.
Same with me. Cannot align the blade properly and makes a loud sound! Not cutting at all.
@@Asiong09 I will try to describe it simply. 0.55 pay attention here. This stage requires two people. Align the blade and make sure the blade is in the correct millimeter range (0.7-1.4mm). check again. If ready, let the other person tighten the screw slightly. this much. Remember, you will hold the relevant part of the device with both hands as if it were ready for use. The other person will tighten the bolt. this much.
Hello great video thank you. I just bought the product and the cutter blade is not exactly parallel, do you think it would be a problem, what should I do?
He shows in the video - loosen the screws, adjust, re-tighten.
Can you show how to aligment slowly, thanks
40 years and still running...only used a bit of oil every 2 to 3 years. Still wirks as good as new. Never changed the blades.
So we do not need to put oil drops after every time we use this trimmer?
is imposible to take out the screws without damage
Where is ur service center in bhubaneswar odisha
Is it possible to change the moser blade to a wahl blade e.g. Wahl Super Taper blade?
The inner smaller blade doesnt fit back onto that little plastic thing in the middle so when you put the big metal plate blade on top and screw it in, the smaller blade is still kind of loose and if you touch it with your fingers it moves... whats up with that
Yeah it does not cut anymore and makes a loud sound!
I had same problem ,did u find any solution
I have same problem, black blade moves easily, and when I on the trimmer ,it gives cracking sound ,why is that
When I on the trimmer, it gives cracking sound for 1 sec ,why is that, did u notice it
Same problem here! Any solutions? 😅
Very helpful! Thanks!
Ben trend yoldan aldım herşeyi normal alttaki karka logosu içe dağru kabarık değil başka aynen bilgileri düz bir şekilde yazılı eski model mı yoksa sahte mı diye şüpedeyim
Bhai iske parts bhi mil jaate h kya delhi m kahi kissi ko pta ho to please reply
Thank you
How often do you change blades?
whenever they are dull. Depends a lot on the type of usage. :-)
Where can i find the compatible guide for the blade of this?
I have this plastic that putting an two bolt, to screw in, that plastic is broken, is there available sale online?
e bay Moser 1400 Guide piece 1403-7000
th-cam.com/video/huqH1GCV6mQ/w-d-xo.html Best repair video!
I want this product where can I buy this product
Can we zero gap Moser 1400 please tell me sir
Hello where can i find the red plastic piece please ? I lost it -_-
what can be used as a substitute for the included oil if it's not available?
Well, you need to make sure that oil is always available. Even if you're stuck on a lonley island you should have this oil always with you: www.moser-profiline.de/en/produktfinder/_leaf/415
thanks,
I mean are olive oil and other vegetable oils not efficient lubricants for the blades?
Nope! Never use olive oil etc. to lubricate your blades please. Just wait until you can use the recommended oil. :-)
I'll try although I can't get access to any similar oil here :,(
Where are you from mate?
Why dont you offer an exchange blade that can cut shorter than 0,7mm?
Thanks
Are blades exchangeable in 1230 and 1400 models?
i brought my moser one month back ... but the screws are very tight to open i feel still very difficult to open ..please suggest me how much width of screw driver to be used to open the scews ....
i hope u will help me to sought out this problem
Same problem
Who is the best mozer 1400 or brun 6*1 for myself ?thank you
4 years later: Moser 1400. Will live longer than you will.
In Russia sold Moser 1400 (art. No 1400-0451). But I can't find it on the official website of the Moser, or in the catalogues. Tell me, please, is there the model officially?
Don't worry! This is the official burgundy model.
Burgundy is 1400-0051 with two attachment combs include, and i mean 1400-0451 (gray) with one attachment comb 4-18mm. (art. 1400-0050 with one attachment comb 4.5mm - there is official web site).
This is because its a consumer version: www.moser-consumer.com/products/hair-clippers/1400-edition There are different article numbers for some regions. This is why its called 0451 in your area.
OK. Thank You.
And another one question. All resource declarate "cutting length adjustment (0.7 - 3 mm)"; it is clear that the minimum length of 0.7 mm, maximum 3 mm. And what levels of length 2, 3 and 4? )) This is known? (The same applies to the length of the haircuts for some blades with adjustable length 0.7-3mm: 5 position, but what is it?)
what is the button in the second side of the button of the power (on-of)???? what the uses of this button 🤔🤔🤔🤔
that button keeps the long handle thingy in place and releases it when you push the button.
Szia. Ha a jobb oldali gombot bekapcsolod és a hosszú kart a gép testéhez nyomod akkor az ott marad. Ekkor tudsz a gép műanyag feje nélkül picit nagyobbat vágni mint amikor simán csak fej nélkül vágsz szinte kopaszra. Ez pici átmenet hosszabb mint fej nélküli minimum de rövidebb mint a műanyag fej legrövidebb vágáshossza. Ha megértetted írj vissza. Köszönöm.
كم السعر
Suuuper!!!
nice❤💝💞💓💗💖💘💕❣️💙💚💛🧡❤️
Tq
After i make this, the sound of my machine is a little bit different. Is this normal ?
u can change sound or speed by adjusting the screw on right side...
Old fashioned machine, sounds like a tractor after one month of use
camel machine made in Germany
Bhai mozer ka oringal trimmer kharidna chahta hu, link de sakte ho..??
Plz..
Please contact WAHL India, they can help: wahlglobal.com/india/index.html
𝙎𝙬𝙞𝙩𝙘𝙝 𝙛𝙧𝙚𝙚 𝙝𝙤𝙤 𝙜𝙮𝙚 𝙝𝙖𝙞 𝙤𝙣 / 𝙤𝙛𝙛 𝙣𝙝𝙞 𝙝𝙤𝙩𝙖 𝙝𝙖𝙞 𝙪𝙨𝙠𝙖 𝙠𝙤𝙞 𝙫𝙞𝙙𝙚𝙤 𝙮𝙖 𝙪𝙥𝙖𝙮 𝙗𝙩𝙖𝙤𝙤
Very helpful, Thanks!