Using rivets is a bad idea , it creates a weak point and has. Nothing to support it from behind the body panel,,nuts & bolts ,with washers behind the body panel would be far more superior
i agree with you , the only issue with that is, the majority of the Troopys have internal fit out with electrics and water fitting, if the table is damaged or need to be replaced , it means you need to remove the interior fit out to access the nuts, to me that is a big job and costly, that's why i use BLDU stainless steel structural rivets which created a body washer from inside, this type of rivets used in aircraft and can hold stress and Vibrations . there is 12 Rivets in total on each table, and that's a lot of strength. If there is any issues in future, simply just drill them out. I have sold nearly 500 table in the past 2 years, and not a single problem. I hope this help
Can't wait for mine to arrive looks simple to install
Great tutorial simple, doesnt miss anything 😊😊👍👍👍
Also, remove the stress raisers in each hole by deburring each hole before painting.😊
Good bit of kit that’s for sure, I need to look at one of these soon. 🤦🏽👍🏼
Nice and easy fitting following your instructions, looking forward to fit my Trax Table in a few days, thanks Sean, great video ! Cheers from Albany.
the maxtrack locking clamps,, can their security feature not be defeated by undoing the top nuts/bolts ?
\
Couldn‘t believe no one downunder glues airlinerails to the panel and Mount the table and other things onto the rails?
looking forward to receiving and fitting mine then PARTY.
your items will be leaving this friday
It would be good if you could modify them for GQ Patrol?
Will this clear the utility panel installed on the passenger side vent?
yes mate it will clear the mission 4x4 utility panels.
Thanks. Can this table be installed to LC105 or LC100
Why would you use a rivet over a nut and flat head bolt?
Great tutorial 👍
Thanks mate 🙏
Another good vid Sean. Is Two locking clamps comes only with stainless steel?. Not a fan of shine stuff.
Currently got a 78 on order. Long wait
Rooma
Thanks mate, you can have them powder coated black , and can be organised here at mission 4x4 for extra $80 .
Thanks Sean. Got my spread sheet going at the moment. When the car is here will call you
Keep up the good works mate
Parties !!!
Rooma
Beautiful
Do the Treds fit? 2 or 4 pcs?
Nicely done mit
Thanks 👍
The only one question I would like to rise ...is it really necessary to make so many additional holes in the car?😢
Think I’d let the workshop take care of this one for me 😅😂
Outstanding 👌❤️
Using rivets is a bad idea , it creates a weak point and has. Nothing to support it from behind the body panel,,nuts & bolts ,with washers behind the body panel would be far more superior
i agree with you , the only issue with that is, the majority of the Troopys have internal fit out with electrics and water fitting, if the table is damaged or need to be replaced , it means you need to remove the interior fit out to access the nuts, to me that is a big job and costly, that's why i use BLDU stainless steel structural rivets which created a body washer from inside, this type of rivets used in aircraft and can hold stress and Vibrations .
there is 12 Rivets in total on each table, and that's a lot of strength.
If there is any issues in future, simply just drill them out.
I have sold nearly 500 table in the past 2 years, and not a single problem.
I hope this help
I am chris
😂🤦🏾🤦🏾
Safety glasses mate please. Its not flash when you get metal in your eye.